Pre-delivery and used-vehicle inspections – Motor Vehicle Theory motor mechanics lesson
Lesson 131 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Find out what a pre-delivery inspection on a new vehicle is for, and how a technician builds a picture of a used vehicle from its records, its condition and its warning lights.
- Time
- 40 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
This lesson explains vehicle inspections for understanding. The learner should look only, with you present, and never go under or start a vehicle. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If you were buying a used car, which single piece of information would you trust most, and why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking a passed inspection means the car is in good condition. An inspection is a snapshot, and rules vary by state; some states have none.
- Thinking a warning light that never comes on means there are no faults. Lights should come on briefly at start-up; one that never lights may have been disabled.
- Thinking a PDI is only cleaning the car. It includes fluid, tire, light and warning-lamp checks to the manufacturer's checklist.
Hands-on: Design a used-car checklist card with sections for records, tires, body, warning lights and questions to ask. With a qualified adult, try it on a family car that is parked, switched off and cold (look only), and read the tire ages from the sidewalls.
What you will learn
- I can explain the purpose of a pre-delivery inspection.
- I can list the records that help judge a used vehicle.
- I can describe visual checks that reveal a used vehicle's condition.
- I can explain why a pass or a clean history does not replace an inspection.
Key words
- pre-delivery inspection (PDI)
- The checks a dealer's technician makes on a new vehicle before handing it to the customer.
- service history
- The record of servicing carried out on a vehicle, with dates and mileages.
- VIN
- Vehicle identification number: a unique code that identifies one vehicle.
- inspection record
- The record of a vehicle's state inspections, where the state keeps one.
The big ideas
A new vehicle arrives at a dealer straight from the factory and a long journey. Before handover, a technician carries out a pre-delivery inspection: removing transport protection, checking fluid levels, tire pressures and lights, checking that warning lights behave correctly, and making sure the vehicle matches its paperwork. The manufacturer provides the checklist, because every model differs.
A used vehicle has a past, so its inspection is detective work. Records come first: the service history shows whether the schedule was followed, and inspection records help in states that require inspections – rules are set by each state. Then the vehicle itself is examined: tire condition and age (the last four digits of the Tire Identification Number give the week and year), signs of leaks, corrosion, uneven panel gaps that might show crash repairs, and the behavior of the dashboard warning lights.
CARB explains that readiness indicators show whether the onboard self-checks have completed and that a technician uses a scan tool to see which are incomplete – useful, because recently cleared fault codes can hide a problem. A passed state inspection, where there is one, is only a snapshot, so buyers often ask a qualified technician to inspect a used vehicle before they buy.
Read-through: the teaching steps
Pre-delivery inspection
Typical PDI items (the manufacturer's checklist gives the exact list):
- remove transport protection;
- check fluid levels and tire pressures;
- check all lights and warning lamps;
- check that the VIN and equipment match the paperwork;
- road test by a qualified technician.
Records
- Service history: was the manufacturer's schedule followed?
- Inspection records, in states that keep them (rules are set by each state).
- VIN on the vehicle matches the documents.
Mileages on service records should rise steadily; a fall is a warning sign.
Looking at the vehicle
- Tires: tread, damage, uneven wear (can point to alignment or suspension problems), age.
- Leaks underneath, seen from the side, never by going under the vehicle.
- Corrosion, uneven panel gaps or paint mismatches.
- Fluid levels and condition, read by a qualified person.
The car-parts drawing on the lesson page names the main areas.
The main parts you can find on almost every car. Warning lights and diagnostics
Warning lights should come on briefly and then go out when the engine starts. A light that never comes on at all may have been disabled. CARB: readiness indicators show whether each onboard self-check has completed; a technician's scan tool shows which are incomplete – a sign that codes may have been cleared recently.
What records cannot tell you
A passed inspection shows the vehicle met a state's standard on one day, and some states – Texas for non-commercial vehicles since 2025 – have no safety inspection at all. So records never replace an inspection by a qualified technician.
Theory only
This lesson explains what inspections look for. Learners look only, with a qualified adult present, on a parked, switched-off, cold vehicle. Never go under a vehicle; road tests are done by qualified drivers and technicians.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Servicing and maintenance lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- NHTSA – Tires
- California Air Resources Board – On-Board Diagnostic II
- Texas Department of Public Safety – Vehicle safety inspection changes from January 2025
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.