Pre-delivery and used-vehicle inspections – Motor Vehicle Theory motor mechanics lesson
Lesson 131 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out what a pre-delivery inspection on a new vehicle is for, and how a technician builds a picture of a used vehicle from its records, its condition and its warning lights.
- Time
- 40 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson explains vehicle inspections for understanding. The learner should look only, with you present, and never go under or start a vehicle. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If you were buying a used car, which single piece of information would you trust most, and why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking a long MOT means the car is in good condition. The MOT is a snapshot and does not cover the engine, clutch or gearbox.
- Thinking a warning light that never comes on means there are no faults. Lights should come on briefly at start-up; one that never lights may have been disabled.
- Thinking a PDI is only cleaning the car. It includes fluid, tyre, light and warning-lamp checks to the manufacturer's checklist.
Hands-on: Design a used-car checklist card with sections for records, tyres, body, warning lights and questions to ask. With a qualified adult, try it on a family car that is parked, switched off and cold (look only), and look up that car's MOT history online together.
What you will learn
- I can explain the purpose of a pre-delivery inspection.
- I can list the records that help judge a used vehicle.
- I can describe visual checks that reveal a used vehicle's condition.
- I can explain why a pass or a clean history does not replace an inspection.
Key words
- pre-delivery inspection (PDI)
- The checks a dealer's technician makes on a new vehicle before handing it to the customer.
- service history
- The record of servicing carried out on a vehicle, with dates and mileages.
- VIN
- Vehicle identification number: a unique code that identifies one vehicle.
- MOT history
- The online record of every MOT result for a vehicle, including defects and advisories.
The big ideas
A new vehicle arrives at a dealer straight from the factory and a long journey. Before handover, a technician carries out a pre-delivery inspection: removing transport protection, checking fluid levels, tyre pressures and lights, checking that warning lights behave correctly, and making sure the vehicle matches its paperwork. The manufacturer provides the checklist, because every model differs.
A used vehicle has a past, so its inspection is detective work. Records come first: the service history shows whether the schedule was followed, and GOV.UK lets anyone check a vehicle's MOT history online, including past defects and advisories and the recorded mileage at each test. Then the vehicle itself is examined: tyre condition and age, signs of leaks, corrosion, uneven panel gaps that might show crash repairs, and the behaviour of the dashboard warning lights.
Neither a clean history nor a current MOT tells the whole story. GOV.UK warns that a vehicle can be unsafe even if it has a current MOT certificate, and the MOT does not cover the condition of the engine, clutch or gearbox. That is why buyers often ask a qualified technician to inspect a used vehicle before they buy.
Read-through: the teaching steps
Pre-delivery inspection
Typical PDI items (the manufacturer's checklist gives the exact list):
- remove transport protection;
- check fluid levels and tyre pressures;
- check all lights and warning lamps;
- check that the VIN and equipment match the paperwork;
- road test by a qualified technician.
Records
- Service history: was the manufacturer's schedule followed?
- MOT history (GOV.UK): past fails, defects, advisories, recorded mileages.
- VIN on the vehicle matches the documents.
Recorded mileages should rise steadily; a fall is a warning sign.
Looking at the vehicle
- Tyres: tread, damage, uneven wear (can point to alignment or suspension problems), age.
- Leaks underneath, seen from the side, never by going under the vehicle.
- Corrosion, uneven panel gaps or paint mismatches.
- Fluid levels and condition, read by a qualified person.
The car-parts drawing on the lesson page names the main areas.
The main parts you can find on almost every car. Warning lights and diagnostics
Warning lights should come on briefly and then go out when the engine starts (the Highway Code notes the handbrake light as the exception). A light that never comes on at all may have been disabled. A technician can read stored fault codes with diagnostic equipment.
What records cannot tell you
A current MOT shows the vehicle met the standard on one day. GOV.UK says the MOT does not cover the condition of the engine, clutch or gearbox, and that a vehicle can be unsafe even with a current certificate.
Theory only
This lesson explains what inspections look for. Learners look only, with a qualified adult present, on a parked, switched-off, cold vehicle. Never go under a vehicle; road tests are done by qualified drivers and technicians.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Servicing and maintenance lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- GOV.UK – Check your vehicle is safe to drive
- GOV.UK – Getting an MOT
- GOV.UK – Getting an MOT: the MOT test
- The Highway Code – Annex 6. Vehicle maintenance, safety and security
- HSE – Working under vehicles
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.