▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Torque wrenches and why tightness matters – Garage Basics motor mechanics lesson

Lesson 64 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why a bolt that is too loose or too tight can both be dangerous, how a torque wrench measures turning force, and how to calculate torque and convert between units.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

All torque values in this lesson are example numbers for practice; real figures come from the vehicle maker. Tightening safety-critical fasteners is for trained technicians. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think workshops often re-check wheel fasteners after a short drive?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking tighter is always safer. Over-tightening can stretch a bolt beyond its limit, strip threads or distort parts. The maker's figure is the right one.
  • Using a torque wrench to undo tight fasteners. This can damage the mechanism and spoil its accuracy. A breaker bar is used for undoing.
  • Guessing a torque figure. Torque figures come only from the vehicle maker's data. A guess can lead to a wheel or part coming loose.

Hands-on: Explore torque with a door: tie a string to a luggage scale or spring balance (or count elastic band stretch) and pull the door open from near the handle, then from halfway to the hinge. Compare the force needed. Then work out the torque each time using force × distance from the hinge. No work on a vehicle.

What your child will learn

  • I can explain why fasteners must be tightened to the vehicle maker's figure.
  • I can explain how a tightened bolt clamps parts by stretching slightly, like a spring.
  • I can describe how a click-type torque wrench works and why it is held at the handle.
  • I can calculate torque and convert between newton meters and pound-feet.

Key words

torque
Turning force: force × distance from the center of turning.
torque wrench
A wrench that measures, or signals, the torque being applied, so a fastener can be tightened to a set figure.
clamping force
The force with which a tightened bolt holds parts together.
pound-foot (lb-ft)
A US unit of torque: a force of 1 pound acting 1 foot from the center of turning. 1 lb-ft is about 1.356 newton meters (N m).

The big ideas

When a bolt is tightened, it stretches very slightly, like a stiff spring. That stretch pulls the parts together with a clamping force. Too little, and the parts can move, the bolt can work loose with vibration, and a joint can leak or fail. Too much, and the bolt can stretch permanently, the thread can strip, or the part – such as a wheel, a cylinder head or a brake component – can distort or crack.

So vehicle makers give a torque figure for important fasteners, and technicians use a torque wrench to reach it. The figure always comes from the maker's data: it is never guessed, and in this lesson every number used is an example for practice only.

This lesson explains the science. Tightening fasteners on safety-critical parts such as wheels, brakes and steering is work for a trained technician.

Read-through: the teaching steps

  1. Torque

    Torque = force × distance.

    Pushing 100 N at the end of a handle 0.3 m long gives 100 × 0.3 = 30 N m. The longer the handle, the more torque for the same push – which is why it is easy to over-tighten with a long bar.

  2. Why tightness matters

    A tightened bolt is like a stretched spring holding the parts together.

    • Too loose – the clamping force is low; parts can shift, the bolt can loosen with vibration, a seal can leak.
    • Too tight – the bolt can stretch beyond its limit and lose strength, threads can strip, parts can distort.

    Both can be dangerous on a wheel, a brake or a steering part. That is why the maker's figure is used.

  3. Types of torque wrench

    • Click type – the user sets the torque on a scale; when it is reached, the wrench clicks and gives slightly. The user stops at the click.
    • Beam type – a pointer shows the torque on a scale as the user pulls.
    • Digital – shows the torque on a screen and often beeps.

    All must be held at the marked handle, because the scale is set for force at that point.

  4. Units

    In the US, torque is often given in pound-feet (lb-ft), and small figures in pound-inches (lb-in). Modern data often also gives newton meters (N m).

    1 lb-ft ≈ 1.356 N m, and 1 lb-ft = 12 lb-in.

  5. Doing it properly

    Good practice includes:

    • using the maker's figure and, where given, the tightening order (often a star or crisscross pattern for wheels and cylinder heads);
    • pulling smoothly, not jerking, and stopping at the click;
    • never using a torque wrench to undo fasteners;
    • having the wrench checked (calibrated) regularly;
    • storing a click-type wrench at its lowest setting, so its spring is not left compressed.

    Some bolts are tightened to a torque and then turned a further angle; the maker's data says when.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Workshop safety and tools lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

About this lesson

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.