▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Personal protective equipment (PPE) – Garage Basics motor mechanics lesson

Lesson 58 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Learn what PPE a mechanic wears – eye protection, gloves, boots, hearing and breathing protection – what each one protects against, and why PPE is the last line of defense, not the first.

Time
35 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

This lesson is about understanding PPE, not doing workshop tasks. Safety glasses and gloves at home are good examples to look at together. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think some people do not wear PPE even when it is provided, and what would persuade them to?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking ordinary glasses are enough eye protection. Ordinary glasses can shatter and leave gaps at the sides. Safety glasses or goggles are designed for impacts and splashes.
  • Thinking any glove protects against anything. Gloves are chosen for the hazard: nitrile for oil and chemicals, cut-resistant for sharp edges, heat-resistant for hot parts.
  • Thinking PPE makes a dangerous job safe. PPE is the last line of defense. The hazard should be removed or controlled first.

Hands-on: Draw an outline of a person and label the PPE a mechanic would wear for three jobs: changing oil (in a workshop, by a trained person), using a loud air tool, and working near spray painting. Color-code each item by the part of the body it protects. With an adult, look at any PPE you have at home – gardening gloves, safety glasses – and check its labels for what it protects against.

What your child will learn

  • I can name the main types of PPE used in a vehicle workshop and what each protects.
  • I can choose suitable PPE for a given job.
  • I can explain why PPE is the last line of defense.
  • I can calculate the sound level reaching the ear with hearing protection.

Key words

PPE
Personal protective equipment: clothing and equipment worn to protect a person from a hazard, such as goggles, gloves and safety boots.
nitrile gloves
Thin disposable gloves that resist oil and many chemicals, used to keep oil and fluids off the skin.
decibel (dB)
The unit used to measure how loud a sound is.
air-fed breathing protection
A hood or mask supplied with clean air through a hose, used when spraying harmful paints.

The big ideas

Mechanics work with heavy parts, hot surfaces, sharp edges, chemicals, dust and noise. Personal protective equipment – PPE – is the clothing and equipment they wear to protect themselves: eye protection, gloves, safety boots, overalls, and hearing and breathing protection when needed.

HSE, which looks after workplace safety in Great Britain, gives examples of why it matters: frequent, prolonged skin contact with used engine oil can cause dermatitis, two-pack paints can cause occupational asthma and need air-fed breathing protection, and older brake and clutch linings may contain asbestos.

PPE only works if it is the right type, fits, is in good condition and is actually worn. And it is the last line of defense: the hazard should be removed or controlled first. This lesson explains PPE; it does not teach any workshop tasks.

Read-through: the teaching steps

  1. Eyes and face

    Eyes are easily damaged by flying particles, splashes and dust. Safety glasses with side shields protect against flying bits; goggles seal round the eyes against splashes and dust; a face shield protects the whole face, for example from grinding sparks. Ordinary glasses are not safety glasses.

  2. Hands and skin

    Gloves are chosen for the hazard:

    • nitrile gloves – oil, fuel and many chemicals;
    • cut-resistant gloves – sharp edges and metal;
    • heat-resistant gloves – hot parts.

    HSE warns that frequent, prolonged contact with used engine oil can cause dermatitis. Overalls protect clothes and skin, and barrier cream and washing help too. Gloves are kept away from spinning machinery, where they could be caught.

  3. Feet

    Safety boots have toe caps to protect against dropped parts and tools, and soles that resist slipping, oil and sharp objects. HSE says most workshop accidents involve slips, trips and falls, so good soles matter.

  4. Ears

    Air tools, panel beating and engines are loud. Ear defenders or ear plugs reduce the sound reaching the ear. A protector rated at, for example, 25 dB lowers a 95 dB noise to about 70 dB.

    The decibel scale is not like an ordinary scale: every 3 dB increase doubles the sound energy, and every 10 dB increase multiplies it by 10.

  5. Lungs

    Dust masks protect against dust, but not all dust: asbestos from old brake linings needs special precautions. For spraying two-pack (isocyanate) paints, HSE says air-fed breathing protection is needed, because these paints can cause occupational asthma. Exhaust fumes are removed by extraction, not by masks.

  6. The last line of defense

    PPE protects only the person wearing it, only if it is worn correctly, and only against the hazard it is designed for. So workshops first remove hazards, use safer products, and fit guards and extraction. PPE is added on top.

    Loose clothing, long hair and jewelry can be caught in moving parts, so these are tied back or removed.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minGraded by Classfern
Independent practice (three levels)8 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Workshop safety and tools lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

About this lesson

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.