How a tire is made: plies, belts and beads – Garage Basics motor mechanics lesson
Lesson 47 of 70 in the Garage Basics course (ages 11–16)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Look inside a tire at the layers of rubber, fabric and steel that make it strong, flexible and airtight, and compare radial and cross-ply designs.
- Time
- 40 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
If you cut an old bicycle tire for your child, please do the cutting yourself. Car tires contain steel wire and should not be cut at home. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think almost all modern cars use radial tires?”
- Later: the homework, then the practice test.
Watch out for
- Thinking a tire is made of rubber only. It is rubber reinforced with fabric cords, steel belts and steel bead wire.
- Thinking the steel belts hold the tire on the wheel. The beads do that. The belts sit under the tread to keep it flat and strong.
- Thinking a treadwear grade is a mileage. It is a comparison from a standard test: 200 should last about twice as long as 100.
Hands-on: Make a paper model of the layers: cut strips of different colored paper for the inner liner, plies, belts and tread and glue them in order onto card, labeling each. Draw a radial ply with lines straight across a strip, and a cross-ply with two layers of slanting lines that cross. If you have an old bicycle tire, an adult can cut a short section with strong scissors so you can look at the layers.
What your child will learn
- I can name the main layers of a tire and say what each does.
- I can explain the difference between radial and cross-ply (diagonal ply) construction.
- I can explain why rubber is vulcanized.
- I can calculate lengths and ratios linked to tire construction and treadwear grades.
Key words
- ply
- A layer of rubber-coated fabric cords that forms the body (carcass) of the tire.
- belt
- A layer of steel cords under the tread that keeps the tread flat and strong.
- bead
- A loop of steel wire at each inner edge of the tire that holds it tightly on the wheel rim.
- radial
- Construction with body cords running straight across from bead to bead, at right angles to the direction of travel.
- vulcanization
- Heating rubber with sulfur so its long molecules link together, making it strong and springy.
The big ideas
A tire looks like a simple ring of rubber, but it is a carefully layered structure. It has to carry the car's weight, grip the road, flex over bumps thousands of times a minute, stay airtight and survive heat, cuts and years of sunlight.
From the inside out: an airtight inner liner keeps the air in. Over it are one or more body plies, layers of rubber-coated fabric cords that give the tire its shape and strength. At each inner edge, the plies wrap round a bead: a hoop of steel wire that grips the wheel rim. Under the tread sit steel belts, which keep the tread flat on the road and protect against punctures. The thick rubber tread on top grips the road, and the thinner sidewalls flex.
Almost all car tires today are radial: their body cords run straight across from bead to bead, and the steel belts stiffen the tread. Older cross-ply (diagonal ply) tires have cords running at an angle, criss-crossing in each layer. A manufacturer's owner's manual shows the difference in the size code: R for radial, D for diagonal. The rubber is vulcanized, heated with sulfur in a mold, which links its molecules together and presses the tread pattern into it.
Read-through: the teaching steps
The layers
- Inner liner: airtight rubber that holds the air in.
- Body plies: fabric cords (often polyester) that give strength and shape.
- Beads: steel wire hoops that grip the rim.
- Steel belts: under the tread, keeping it flat and strong.
- Tread: thick rubber with grooves that grips the road.
- Sidewall: thinner rubber that flexes and carries the markings.
Reading a tire size code. Radial construction
In a radial tire the body cords run straight across, from one bead to the other, like the spokes of a wheel seen from the side. The sidewall can flex freely while the steel belts keep the tread flat. That gives good grip, low rolling resistance and long tread life.
Cross-ply construction
In a cross-ply (diagonal or bias ply) tire the cords run at an angle, often around 30–40°, and each layer crosses the one below. The sidewall and tread are tied together, so the tread squirms as the sidewall flexes. Cross-ply tires are now found mainly on some classic cars, trailers and special vehicles.
Vulcanizing the rubber
Raw rubber is sticky and weak. Heating it with sulfur in a process called vulcanization links its long molecules together, making it tough and elastic. In the factory, the "green" tire is placed in a heated mold that vulcanizes it and presses in the tread pattern and sidewall markings at the same time.
Treadwear grades
NHTSA explains the Uniform Tire Quality Grading Standards: a treadwear grade compares wear with a control tire graded 100, so a tire graded 200 should last about twice as long. Traction is graded AA, A, B or C and temperature A, B or C.
When the structure is damaged
If cords are visible, or a cut reaches the cords, or the tire has a lump or bulge, the structure is damaged and the tire must be checked by a trained technician at once.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Wheels and tires lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.