▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Exhaust gases and the catalytic converter – Garage Basics motor mechanics lesson

Lesson 10 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Follow the exhaust gases from the cylinder to the tailpipe and find out how a catalytic converter turns three harmful gases into less harmful ones – and how diesel exhausts are cleaned.

Time
45 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

The activities use paper and straws only. Exhausts stay extremely hot after a journey and should never be touched. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Catalytic converters reduce harmful gases but not carbon dioxide. What else could reduce the pollution from road transport?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a catalytic converter removes carbon dioxide. It turns carbon monoxide and hydrocarbons into carbon dioxide. Cutting CO₂ means burning less fuel.
  • Thinking the catalyst gets used up in the reactions. A catalyst is not used up; it only speeds the reactions. Converters do wear out eventually through heat and contamination.
  • Thinking the converter works as soon as the engine starts. It needs to warm up first, so many pollutants come from the first minutes after a cold start.

Hands-on: Compare surface areas: cut a sheet of paper into one large square and another into many small strips. Which has more edges for "gas" to touch? Then make a model honeycomb by standing short pieces of drinking straw upright in a cup and blow gently through them. Draw a labeled diagram of the exhaust route from cylinder to tailpipe, showing what each part does.

What your child will learn

  • I can name the parts of an exhaust system in order.
  • I can name the three main pollutants a three-way catalytic converter treats and what each becomes.
  • I can explain what a catalyst is and why the converter has a honeycomb inside.
  • I can describe the extra exhaust treatment used on diesel engines.

Key words

catalyst
A substance that speeds up a chemical reaction without being used up itself.
three-way catalytic converter
The part of a gasoline car's exhaust that treats carbon monoxide, unburned hydrocarbons and nitrogen oxides at the same time.
nitrogen oxides (NOx)
Harmful gases formed when nitrogen and oxygen from the air react at high temperatures in the engine.
particulate matter
Tiny particles of soot in exhaust gas, especially from diesel engines.
tailpipe
The end of the exhaust pipe, where the gases leave the car.

The big ideas

After the power stroke, the burnt gases are pushed out of the cylinder on the exhaust stroke. They are hot, under pressure and noisy, and they contain some harmful gases as well as carbon dioxide, water vapor and nitrogen.

The exhaust system carries the gases safely to the back of the car, cleans them and makes them quieter. The US Department of Energy lists an exhaust system with a three-way catalyst as one of the main parts of a gasoline car. The catalytic converter contains a honeycomb coated with precious metals that act as catalysts. They help three reactions happen at once: carbon monoxide becomes carbon dioxide, unburned hydrocarbons become carbon dioxide and water, and nitrogen oxides become nitrogen.

Diesel engines need more cleaning, because they make more soot and nitrogen oxides. Their exhausts use a diesel oxidation catalyst, a diesel particulate filter and selective catalytic reduction with diesel exhaust fluid. Exhaust parts get extremely hot and stay hot after the engine stops, so they must never be touched.

Read-through: the teaching steps

  1. The route out

    Exhaust gases leave each cylinder through the exhaust valve and travel through:

    • the exhaust manifold – collects gases from all the cylinders
    • the catalytic converter – cleans the gases
    • the muffler – reduces the noise
    • the tailpipe – where the gases leave

    Find the exhaust in the drawing on the lesson page.

    Engine (under the hood)WindshieldWheel and tireDoorTaillightsExhaustHeadlights
    The main parts you can find on almost every car.
  2. What is in the exhaust?

    Most of the exhaust is nitrogen (from the air), carbon dioxide and water vapor. A small part is harmful:

    • Carbon monoxide (CO) – poisonous
    • Unburned hydrocarbons (HC) – fuel that did not burn
    • Nitrogen oxides (NOx) – harm lungs and help form smog

    Carbon dioxide is not poisonous in the same way, but it is a greenhouse gas.

  3. What a catalyst does

    A catalyst speeds up a reaction without being used up. Inside the converter is a ceramic honeycomb with thousands of tiny channels. They are coated with metals such as platinum, palladium and rhodium. The honeycomb gives a huge surface area, so the gases touch as much catalyst as possible as they flow through.

  4. Three jobs at once

    A three-way converter does three things:

    • Carbon monoxide + oxygen → carbon dioxide (2CO + O₂ → 2CO₂)
    • Hydrocarbons + oxygen → carbon dioxide + water
    • Nitrogen oxides → nitrogen (for example 2NO + 2CO → N₂ + 2CO₂)

    It works best when hot, and when the engine keeps the mixture close to the correct air-fuel ratio.

  5. Cleaning diesel exhaust

    The US Department of Energy lists three diesel aftertreatment parts:

    • Diesel oxidation catalyst – treats carbon monoxide and hydrocarbons
    • Diesel particulate filter – captures soot (particulate matter)
    • Selective catalytic reduction – uses diesel exhaust fluid, a solution of urea in water, to turn nitrogen oxides into nitrogen and water
  6. Heat and safety

    A catalytic converter must be very hot to work, and it stays hot long after the engine has stopped. Parked cars with hot exhausts can even set fire to dry grass underneath. Exhaust systems are inspected by trained technicians, never touched by learners.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.