▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Charts: scales (1:500,000 and 1:250,000; US sectional) and the Lambert conformal conic projection – Private Pilot Theory aviation lesson

Lesson 206 of 228 in the Private Pilot Theory course (ages 16+)

US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version

Understand what a chart scale means, measure real distances from chart distances at 1:500,000 and 1:250,000, and see what "Lambert conformal conic" means for a projection.

Time
45 minutes + 10 min homework
Course
Private Pilot Theory (ages 16+)
You need
Paper, a pencil and this page
Graded
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test. Rules and values on this page are given as of November 2026. Always check the current official source (the FAA) before relying on them.

How to use this lesson

This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why might a pilot carry both a 1:500,000 and a 1:250,000 chart for the same flight?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking 1:500,000 is a "bigger" scale than 1:250,000. 1:250,000 is larger scale – more detail, smaller area.
  • Forgetting to convert units. cm on the chart → cm on the ground → km or NM.
  • Assuming any flat map keeps directions correct. Conformal projections keep angles; others may not.

Hands-on: On a road atlas, find the scale. Measure a road between two towns with string, convert it with the scale, and compare with the distance shown on a road sign.

What you will learn

  • I can explain a representative fraction such as 1:500,000.
  • I can convert a chart distance into a real distance.
  • I can compare a 1:500,000 chart with a 1:250,000 chart.
  • I can explain what "conformal" and "conic" mean.
  • I can name the common VFR chart scales in the UK and US.

Key words

scale
The ratio of a distance on the chart to the real distance, e.g. 1:500,000.
sectional chart
The main US VFR chart, at 1:500,000.
terminal area chart
A US VFR chart around busy airports, at 1:250,000.
conformal
A projection that keeps angles (and small shapes) correct.
conic
A projection made by wrapping a cone around the globe.

The big ideas

A chart scale such as 1:500,000 means 1 unit on the chart represents 500,000 of the same units on the ground. The main US VFR chart, the sectional, is 1:500,000, and terminal area charts (TACs) are 1:250,000; since 2021 the charts have been published on a 56-day cycle. The larger-scale 1:250,000 chart shows more detail over a smaller area.

At 1:500,000, 1 inch on the chart is 500,000 inches = 12,700 m on the ground (1 inch = 2.54 cm exactly, NIST), which is 12,700 ÷ 1,852 ≈ 6.86 NM. At 1:250,000, 1 inch is about 3.43 NM.

A flat chart cannot show a round Earth perfectly, so every chart uses a projection. "Conic" means the globe is projected onto a cone; "conformal" means angles are preserved, so directions measured with a plotter are correct. The Lambert conformal conic is the projection named in the syllabus for VFR charts. This lesson is for understanding only.

Read-through: the teaching steps

  1. What 1:500,000 means

    1 unit on the chart = 500,000 of the same unit on the ground.

  2. Chart to ground (metric)

    At 1:500,000: 1 cm = 5 km ≈ 2.7 NM. At 1:250,000: 1 cm = 2.5 km ≈ 1.35 NM.

  3. Chart to ground (inches)

    At 1:500,000: 1 inch = 12,700 m ≈ 6.86 NM. At 1:250,000: 1 inch ≈ 3.43 NM.

  4. Which scale when?

    A 1:250,000 chart is "larger scale": more detail, less area – useful near busy airspace. A 1:500,000 chart covers more area for route planning.

  5. Projections

    • Conic: projected onto a cone touching or cutting the globe.
    • Conformal: angles preserved, so measured directions are correct.

    A straight line on such a chart is close to a great circle over the distances VFR charts cover.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Navigation lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.