Chart symbols: aerodromes, airspace, obstacles and visual reference points – Private Pilot Theory aviation lesson
Lesson 207 of 228 in the Private Pilot Theory course (ages 16+)
US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version
Learn how to approach the symbols on a VFR chart – aerodromes, airspace, obstacles, terrain and visual reference points – using the chart's own legend.
- Time
- 45 minutes + 10 min homework
- Course
- Private Pilot Theory (ages 16+)
- You need
- Paper, a pencil and this page
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test. Rules and values on this page are given as of November 2026. Always check the current official source (the FAA) before relying on them.
How to use this lesson
This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think chart symbols are reviewed and changed from time to time?”
- Later: the homework, then the practice test.
Watch out for
- Relying on memory for symbol meanings. Use the legend on the current chart.
- Comparing chart heights (AMSL) with height above ground. Charts use AMSL; compare with an altimeter on sea-level pressure.
- Planning right at an airspace base. The Skyway Code suggests a 200 ft (and 2 NM) margin.
Hands-on: Look at an Ordnance Survey or road map legend. Pick five symbols, find each on the map, and explain what they would mean to a pilot looking down.
What you will learn
- I can explain why the chart legend is the authority on symbols.
- I can name the main groups of chart symbols.
- I can explain why heights on charts are above mean sea level.
- I can apply a stated clearance margin to an airspace or obstacle height.
- I can explain what a visual reference point is for.
Key words
- legend
- The key on the chart that explains every symbol.
- aerodrome symbol
- A mark showing an aerodrome and some of its features.
- obstacle
- A tall man-made object such as a mast, shown with its height.
- visual reference point (VRP)
- A named ground feature used as a reporting point (often called a VFR checkpoint in the US).
- AMSL
- Above mean sea level – the usual reference for heights on charts.
The big ideas
A VFR chart packs a great deal into symbols: airports, controlled and special-use airspace with their vertical limits, obstructions such as towers, terrain shading and spot elevations, and named VFR checkpoints. Symbols and colors change between editions and between countries, so the authority is always the legend printed on the chart itself – not memory.
Heights on aeronautical charts are generally given above mean sea level, so they can be compared directly with an altimeter set to the local altimeter setting. Airspace boundaries are shown with their floor and ceiling. A UK habit worth knowing, from the CAA Skyway Code, is a "Take 2" margin: staying 2 NM or 200 ft clear of controlled and restricted airspace.
This lesson teaches how to read a chart in principle; it is not a substitute for the current chart and its legend.
Read-through: the teaching steps
Start with the legend
Every chart has a legend. Symbols, colors and line styles are defined there – and they can change between editions.
The main groups
- Aerodromes (civil, military, private)
- Airspace and its vertical limits
- Obstacles (masts, towers) with heights
- Terrain: contours, shading, spot heights
- Visual reference points and navigation aids
Heights on charts
Heights are generally above mean sea level (AMSL), matching an altimeter set to sea-level pressure.
Airspace limits
Each block of airspace shows its base and its upper limit. A base of 2,500 ft means flight below 2,500 ft passes underneath.
The "Take 2" margin
Skyway Code: stay 2 NM or 200 ft clear of controlled airspace, danger/restricted areas and ATZs. Base 2,500 ft → plan no higher than 2,300 ft beneath it.
Visual reference points
Named features – towns, lakes, junctions – used to report position or check progress.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Navigation lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.