▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Piston engines in light aircraft – Ground School Basics aviation lesson

Lesson 18 of 90 in the Ground School Basics course (ages 11–16)

US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version

Most small airplanes use a piston engine much like a car's. Learn the four-stroke cycle, why aircraft have two of everything in the ignition, and what carburetor icing and detonation are.

Time
50 minutes + 10 min homework
Course
Ground School Basics (ages 11–16)
You need
Paper, a pencil and this page
Graded
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test.

For parents: how to use this lesson

Theory for understanding only. Carburetor icing figures are general guidance from the US handbook; real decisions follow each aircraft's own documents. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think aircraft piston engines are designed with 'two of everything' in the ignition, when most car piston engines are not?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking carburetor ice only forms below freezing. The air in the carburetor is cooled sharply, so ice can form on mild, damp days well above freezing outside.
  • Thinking the piston engine stops if the battery fails. Magnetos make their own electricity, so the ignition does not depend on the battery.
  • Mixing up detonation and pre-ignition. Detonation is an explosive burn after the spark; pre-ignition is the mixture lighting before the spark from a hot spot.

Hands-on: Make a model piston: a cardboard tube as the cylinder and a smaller roll of card as the piston. Move it through the four strokes and say each name aloud: suck, squeeze, bang, blow.

What your child will learn

  • I can describe the four strokes: intake, compression, power, exhaust.
  • I can explain why aircraft piston engines have dual magneto ignition.
  • I can explain the jobs of the oil.
  • I can explain why the fuel mixture must be adjusted as altitude changes.
  • I can describe carburetor icing, detonation and pre-ignition.

Key words

four-stroke cycle
The repeating sequence in each cylinder: intake, compression, power and exhaust.
magneto
A device driven by the piston engine that makes its own electricity for the spark plugs, independent of the aircraft's battery.
mixture
The ratio of fuel to air going into the cylinders.
carburetor icing
Ice forming inside the carburetor because fuel evaporating and the pressure drop in the venturi cool the air sharply.
detonation
Uncontrolled, explosive burning of the fuel–air charge, instead of a smooth burn, which can damage the piston engine.

The big ideas

Most light airplanes are powered by a piston engine that turns a propeller. Like a car's, it works on a four-stroke cycle. On the intake stroke the piston moves down and draws in a mixture of fuel and air. On the compression stroke it moves up and squeezes the mixture. A spark then ignites it and the hot gases push the piston down on the power stroke. Finally, on the exhaust stroke the piston rises and pushes the burned gases out.

Aircraft piston engines are built for reliability. The sparks come from magnetos, which make their own electricity, so the piston engine keeps running even if the aircraft's battery and electrical system fail. There are two magnetos and two spark plugs in every cylinder – dual ignition – for safety and a better burn. Oil lubricates the moving parts, carries heat away, helps seal the piston rings and carries dirt to the filter.

The air gets thinner with height, so the fuel-to-air mixture would become too rich; it must be leaned as the airplane climbs. In a carburetor, evaporating fuel and the drop in pressure in its narrow venturi can cool the air sharply, so ice can form even on a mild, damp day. Getting the burn wrong can cause detonation (an explosive burn at high power and temperature) or pre-ignition (the charge lighting early from a hot spot). The octane rating of fuel tells you how well it resists detonation.

Read-through: the teaching steps

  1. Suck, squeeze, bang, blow

    • Intake – piston down, fuel–air mixture drawn in
    • Compression – piston up, mixture squeezed
    • Power – spark ignites the mixture, hot gas pushes the piston down
    • Exhaust – piston up, burned gas pushed out

    The pistons turn a crankshaft, which turns the propeller.

  2. Two magnetos, two plugs

    Magnetos make their own electricity, independent of the battery. With two magnetos and two spark plugs per cylinder, one can fail and the piston engine still runs. Two sparks also burn the mixture more completely.

  3. What the oil does

    • Lubricates and reduces friction
    • Removes heat
    • Helps seal the piston rings against the cylinder walls
    • Carries dirt away to the filter
  4. Mixture and altitude

    Thinner air at height means less air for the same fuel, so the mixture becomes too rich. It is leaned (less fuel) as the airplane climbs. A mixture that is too lean, especially at high power, can lead to detonation.

  5. Carburetor icing

    Fuel evaporating and the pressure drop in the venturi can cool the air in a carburetor by 60–70 °F. Icing is most likely below about 70 °F with humidity above 80%, but it can happen up to about 100 °F with humidity as low as 50%. Carburetor heat melts the ice but can reduce power by up to 15%.

  6. Detonation and pre-ignition

    Detonation is an explosive, uncontrolled burn, most likely at high power with very hot cylinders. Pre-ignition is the mixture lighting before the spark, from a hot spot such as a glowing carbon deposit. Higher-octane fuel resists detonation better.

The lesson, step by step

50 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task15 minNot assessed, self-checked
Worked examples and guided practice10 minGraded by Classfern
Independent practice (three levels)16 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Power: propellers and jets lessons · Ground School Basics course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.