▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Bicycle brakes and a simple safety check – Young Mechanics motor mechanics lesson

Lesson 33 of 40 in the Young Mechanics course (ages 8–11)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how bicycle brakes use friction to stop the wheels, and learn the simple look-and-check a rider does with a grown-up before every ride.

Time
35 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Please do the bicycle check alongside your child and keep any adjustment or repair for yourself or a bicycle shop. Brake discs can be hot after a ride. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think bicycles have two brakes instead of just one?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking brakes stop a bicycle by pushing on the ground. Brakes press on the wheel rim or a disc. The wheel slows, and then the tyre's grip on the ground slows the bicycle.
  • Thinking a child should tighten or adjust the brakes. Brakes are safety parts. Children check with a grown-up and a bicycle mechanic does any fixing.
  • Thinking brakes work the same in the rain. Wet rims are slippery, so rim brakes take longer to stop. Leave more room in wet weather.

Hands-on: Rub your hands together for ten seconds and feel the heat: that is friction. Then, with a grown-up holding a bicycle steady, take turns to squeeze each brake lever and push the bicycle gently forward to feel the wheel stop. Make a checklist card with four boxes – tyres, brakes, chain, lights – to use with a grown-up before rides. Do not touch a disc that has just been used.

What your child will learn

  • I can explain how a brake uses friction to slow a wheel.
  • I can name rim brakes, disc brakes and back-pedal brakes.
  • I can say which brake lever works which wheel on my bicycle, with a grown-up's help.
  • I can describe a simple safety check and say who fixes any problem I find.

Key words

friction
The force that tries to stop two surfaces sliding past each other. Brakes use it to slow a wheel.
brake lever
The handle on the handlebars that the rider squeezes to brake.
brake pad
The rubbery block that presses on the wheel rim or disc when the rider brakes.
rim brake
A brake whose pads squeeze the metal edge (rim) of the wheel.
disc brake
A brake whose pads squeeze a metal disc fixed in the middle of the wheel.

The big ideas

A moving bicycle has energy of movement. To stop, that energy has to go somewhere. Brakes turn it into heat by rubbing. This rubbing is called friction.

When a rider squeezes a brake lever, a cable or a small amount of fluid carries the squeeze to the brake. The brake presses pads against the wheel rim or against a metal disc, and friction slows the wheel. Some small bicycles have a brake inside the back hub that works when the rider pedals backwards.

Brakes keep riders safe, so a quick look-and-check before a ride is a good habit. A child checks with a grown-up and never tries to adjust or fix the brakes: anything that seems wrong goes to a grown-up or a bicycle mechanic.

Read-through: the teaching steps

  1. Friction stops the wheel

    Rub your hands together quickly and they get warm. That is friction turning movement into heat. A brake does the same thing: the pads rub on a part that spins with the wheel, and the wheel slows down. Find the brake in the drawing on the lesson page.

    SaddleHandlebarsFramePedal and crankChainRear wheel and tyreFront wheelBrake
    The main parts of a bicycle.
  2. Rim brakes

    Rim brakes have two pads, one on each side of the wheel. When the rider squeezes the lever, a cable pulls the pads together so they grip the metal rim. Rim brakes work less well when the rims are wet, so riders leave more room to stop in the rain.

  3. Disc brakes

    Disc brakes have a metal disc fixed to the middle of the wheel. Pads squeeze the disc. Many mountain bicycles use them because they work well in mud and rain. A disc gets very hot after braking, so it must never be touched.

  4. Back-pedal brakes

    Some small bicycles have a brake hidden inside the back hub. The rider pedals backwards to make it work. These bicycles may have no brake levers at all.

  5. Two brakes, two wheels

    Most bicycles with levers have two brakes: one for the front wheel and one for the back. Which lever works which wheel can be different from one bicycle to another, so ask a grown-up to show you on yours. Using both brakes gently and evenly is the safe way to slow down.

  6. A simple safety check

    Before a ride, a rider and a grown-up look over the bicycle together:

    • Tyres – firm, with no cuts or bald patches
    • Brakes – each lever squeezes firmly and does not touch the handlebar
    • Chain – not hanging loose
    • Lights and reflectors – clean and in place

    If anything seems wrong, the bicycle is not ridden. A grown-up or a bicycle mechanic fixes it. In the United States, new bicycles with hand brakes are tested to stop within 15 feet from 15 mph.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Bikes and motorbikes lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.