▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Regenerative braking in depth – Vehicles and Technology motor mechanics lesson

Lesson 6 of 50 in the Vehicles and Technology course (ages 14+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how an electric or hybrid car turns its motion back into electricity when it slows down, how much energy that really saves, and why the ordinary friction brakes are still essential.

Time
45 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

The bicycle activity needs an adult to steady the bike and keep fingers clear of the spokes and chain. Nothing in this lesson involves working on a car's brakes. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Regenerative braking returns most energy in city driving. What does that suggest about where electric vehicles might make the biggest difference?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking electric cars do not need ordinary brakes. Regeneration is limited. Friction brakes are always fitted and do the hard stops and the final stop.
  • Thinking regenerative braking puts back all the energy used to speed up. Losses in the drive system, air and rolling resistance mean only part comes back – the official estimate for electric cars is about 22% of energy in combined driving.
  • Thinking doubling speed doubles the energy to lose. Kinetic energy depends on speed squared, so doubling the speed gives four times the energy.

Hands-on: Try the energy idea with a bicycle dynamo light, with an adult: turn the bicycle upside down on a soft surface so it rests safely, spin the wheel by hand with the dynamo touching the tyre, and then without it. Notice that the wheel slows down faster when the dynamo is making light – the dynamo takes energy from the wheel, just as a car's motor does when regenerating. Keep fingers away from the spokes and chain. Then draw a bar chart of the official city, combined and highway figures for regenerative braking in an electric car.

What you will learn

  • I can explain how a traction motor works as a dynamo to slow the car.
  • I can calculate kinetic energy with KE = ½mv² and see how speed affects it.
  • I can use official figures to compare how much energy regenerative braking recovers in city and highway driving.
  • I can explain why friction brakes are still needed and how the two systems are blended.
  • I can explain the limits on regeneration (full battery, cold battery, hard stops).

Key words

regenerative braking
Slowing a vehicle by using its traction motor as a dynamo, so that kinetic energy is turned into electricity and stored in the battery.
kinetic energy
The energy an object has because it is moving: KE = ½ × mass × speed².
friction brakes
The ordinary disc or drum brakes that turn kinetic energy into heat by rubbing.
brake blending
The control system's sharing of each stop between regenerative braking and the friction brakes.
one-pedal driving
A setting on many electric cars where lifting off the accelerator gives strong regenerative braking.

The big ideas

A moving car carries kinetic energy. In a conventional car, the brakes turn all of it into heat that is lost to the air. Electric and hybrid cars can do better: their traction motor can be driven by the wheels and work as a dynamo, turning some of that motion back into electricity for the battery. This is regenerative braking.

The US Department of Energy's Alternative Fuels Data Center (AFDC) notes that a hybrid's battery is charged by regenerative braking and by the engine, and fueleconomy.gov explains that regenerative braking recaptures energy normally lost in coasting or braking. For all-electric cars, fueleconomy.gov estimates that regenerative braking returns about 22% of the energy in combined driving – around 32% in city driving but only about 6% on the highway, where there is far less braking.

Regeneration has limits. It cannot fully stop the car in an emergency, it is reduced when the battery is full or cold, and it acts only on the driven wheels. So every electric and hybrid car keeps a full set of friction brakes, and a control system blends the two.

This is explanation for understanding, not a repair guide. Brakes are safety-critical, and brake and high-voltage work is for trained technicians only.

Read-through: the teaching steps

  1. Motor becomes dynamo

    When the driver lifts off the accelerator or presses the brake pedal, the power electronics change what they ask of the motor. Instead of pushing current into the motor to make torque, they let the turning wheels drive the motor, which now makes current.

    Making that current takes effort, so the motor resists the wheels – a braking torque. The inverter converts the motor's AC into DC and sends it back to the battery.

    Traction battery pack (under the floor)Electric traction motorPower electronicsCharge port
    The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only.
  2. How much energy is there?

    Kinetic energy is KE = ½mv², with mass m in kilograms and speed v in metres per second.

    A 1,800 kg car at 20 m/s (about 45 mph or 72 km/h) has ½ × 1,800 × 20² = 360,000 J = 360 kJ. Because speed is squared, doubling the speed gives four times the energy – and four times as much to get rid of when stopping.

  3. What the official figures say

    fueleconomy.gov estimates how much energy regenerative braking returns in an all-electric car:

    • City driving: about 32% returned
    • Combined driving: about 22% returned
    • Highway driving: about 6% returned

    For hybrids, the same site gives about 5–9% recovered in combined driving, 8–14% in the city and 2–4% on the highway. Stop-start city traffic gives regeneration the most chances to work.

  4. Why not 100%?

    Not all kinetic energy can be returned:

    • Some goes on air resistance and rolling resistance while the car slows anyway.
    • The motor, inverter and battery each lose a little as heat.
    • Hard stops need more braking than the motor can give, so friction brakes take the rest.
    • A full or very cold battery cannot accept much charge, so regeneration is reduced.
    • Only the driven wheels can regenerate; the others need friction brakes.
  5. Blending with friction brakes

    In most electric and hybrid cars, pressing the brake pedal does not directly squeeze the brakes in the usual way. A control unit works out how much braking the driver wants, uses as much regeneration as is available, and adds friction braking for the rest. The driver feels one smooth pedal.

    The friction brakes, anti-lock braking and stability systems are always ready for an emergency stop. In everyday driving the friction brakes may be used much less, which is why their condition still has to be checked by technicians at services and inspections.

  6. One-pedal driving

    Many electric cars let the driver choose how strong regeneration is when lifting off the accelerator. On the strongest setting, the car slows firmly whenever the driver lifts off, and the brake pedal is used much less – often called one-pedal driving.

    In many electric cars the brake lights come on when regeneration slows the car hard enough, so drivers behind are warned.

  7. Safety

    Regenerative braking is controlled by software working with the high-voltage system and the brakes. Neither is a place for amateur work: brake systems are safety-critical and the high-voltage parts are for trained technicians only. Learners explore it through calculations and diagrams.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Electric and hybrid vehicles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.