▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Supplementary restraint systems: airbags and pretensioners (awareness) – Motor Vehicle Theory motor mechanics lesson

Lesson 102 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how airbags and seat-belt pretensioners sense a crash and act within a few hundredths of a second, why they are classed as explosive devices, and why only trained technicians ever handle them.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

This lesson is awareness only: airbags and pretensioners are explosive devices that only trained technicians handle. The calculations use speed, distance, time and acceleration from GCSE/A level physics. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Cars now have many airbags, including some outside the vehicle on test designs to protect pedestrians. Where else might an airbag be useful, and what problems would it bring?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking an airbag replaces the seat belt. Airbags are supplementary. They are designed to work with a fastened belt; without one, the occupant may be in the wrong place when the bag deploys.
  • Thinking an airbag is safe once the battery is disconnected. The control unit can store energy for a time, and the module is still a pyrotechnic device. Only trained technicians follow the manufacturer's procedure.
  • Thinking the warning lamp lighting at switch-on means a fault. A brief light at switch-on is the self-test. A fault is shown when the lamp stays on or comes on while driving.

Hands-on: Sit in the front passenger seat of a parked car with an adult. Watch the dashboard as the adult switches the ignition on: time how long the airbag lamp stays lit for its self-test. Then read the airbag section of the vehicle handbook and list where the airbags are fitted. Look only: do not touch the steering wheel centre, the dashboard covers or any seat-belt mechanism.

What you will learn

  • I can describe the parts of a supplementary restraint system and what each one does.
  • I can explain why airbags and pretensioners are pyrotechnic devices and the hazards this creates.
  • I can calculate speed, distance, time and deceleration in a crash to show why the system must act so quickly.
  • I can explain the role of the SRS warning lamp and why all SRS work is for trained technicians only.

Key words

SRS
Supplementary restraint system: the airbags and seat-belt pretensioners that add to (supplement) the protection of the seat belt.
pyrotechnic
Using a small explosive or burning charge to produce gas or movement very quickly.
pretensioner
A device that pulls the seat belt tight in the first instant of a crash, removing slack.
SRS control unit
The ECU that reads crash sensors, decides whether to deploy, and fires the airbags and pretensioners.
readiness (warning) lamp
The dashboard lamp that lights briefly at switch-on as a self-test and stays on if the system has a fault.

The big ideas

Seat belts are the main protection in a crash. Airbags and seat-belt pretensioners are supplementary: they add to what the belt does. Together they form the supplementary restraint system (SRS).

These devices must act faster than a person can blink, so they use pyrotechnics: small charges that burn in an instant to produce gas or movement. HSE describes airbags and pretensioners as pyrotechnic articles. If they are not handled correctly there is a possibility of physical injury and poisoning, and HSE says only appropriately trained personnel should deploy airbags, following the manufacturer's procedures.

This lesson is for awareness and understanding only. There are no practical steps in it, and there never should be: any work on or near airbags and pretensioners is for trained technicians with the manufacturer's information.

Read-through: the teaching steps

  1. The parts of the system

    • Crash sensors – accelerometers inside the SRS control unit, and often satellite sensors at the front and sides of the vehicle.
    • SRS control unit – decides whether the crash is severe enough and which devices to fire.
    • Airbag modules – a folded fabric bag and an inflator, in the steering wheel, dashboard, seats, roof rails and sometimes the knee area.
    • Seat-belt pretensioners – at the buckle or the belt reel.
    • Clockspring – a coiled ribbon cable behind the steering wheel that keeps the driver's airbag connected while the wheel turns.
    • Warning lamp – shows the system's readiness.
  2. Sensing a crash

    The control unit constantly measures deceleration. A pothole or a hard brake gives a short, small spike; a crash gives a large, sustained deceleration. The unit's software compares the pattern with stored data and decides within a few thousandths of a second.

    It also checks which seats are occupied and whether belts are fastened, so it can choose which devices to fire. Many cars can switch off the front passenger airbag (automatically or with a key switch) for a rear-facing child seat, as the handbook explains.

  3. Pretensioners and load limiters

    In the first instant of a crash, the pretensioner fires a small charge that drives a piston or rotates the belt reel, pulling slack out of the belt so the occupant is held firmly before moving forward.

    A load limiter then lets the belt pay out a little in a controlled way, so the force on the chest does not get too high. The belt and the airbag are designed to work together.

  4. Airbag deployment

    When the control unit fires an airbag, an inflator releases gas very rapidly and the bag bursts through its cover. It fills in a few hundredths of a second, then vents through holes as the occupant moves into it, cushioning them rather than acting like a wall.

    Because the bag comes out with great speed and force, people sit well back from the steering wheel, and children ride in the right seat for their size. After deployment, airbags and pretensioners are not reused: always new components, as HSE says.

  5. The warning lamp

    When the ignition is switched on, the SRS lamp lights for a few seconds while the control unit tests the circuits, then goes out. If it stays on, or comes on while driving, the system has a fault and may not work in a crash. The vehicle should be checked by a qualified technician with the right diagnostic equipment.

  6. Why SRS is for trained technicians only

    HSE's guidance on airbags and pretensioners says:

    • check the manufacturer's information before working on vehicles with airbags – procedures differ between makes;
    • never place your head or body near the front of an undeployed airbag;
    • avoid heat (above 900 °C), impact, electrical current including static electricity, and radio transmitters;
    • never try to repair or modify airbag modules;
    • disposing of explosives as normal waste is illegal.

    The control unit can also store enough energy to fire a device for a time after the battery is disconnected; the manufacturer's data gives the waiting time. Learners never touch SRS components.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Electrical and electronic systems lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.