▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

MOT: brakes – Motor Vehicle Theory motor mechanics lesson

Lesson 118 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how the MOT judges brakes: the sections of the manual, brake efficiency percentages, pad wear limits, brake fluid and ABS.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

This lesson explains published MOT brake standards (November 2026). It does not teach brake repair; brakes are for qualified technicians only. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think newer cars must reach a higher brake efficiency than older ones?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a lit pad-wear warning lamp is an automatic fail. The manual says an illuminated brake wear indicator alone is not a reason for failure; the pad itself is judged.
  • Using the same efficiency figure for every car. 58% for M1 cars first used on or after 1 September 2010, 50% for older cars.

Hands-on: Use a toy car and a kitchen scale to explore efficiency: weigh the car, then measure (with a spring balance) the force needed to drag it with its wheels taped so they cannot turn. Work out force ÷ weight × 100. With a qualified adult, look at the brake fluid reservoir of a parked, switched-off, cold car through its see-through side (look only, do not open) and find the MIN and MAX marks.

What you will learn

  • I can list the main headings of the MOT brake section.
  • I can calculate a brake efficiency percentage and compare it with the MOT values.
  • I can state how pad wear and brake fluid level are categorised.
  • I can explain the MOT rule for ABS on newer cars.

Key words

brake efficiency
Braking force as a percentage of the vehicle's weight, measured on a roller brake tester or with a decelerometer.
service brake
The main foot-operated brake system used to slow and stop the vehicle.
wear indicator
A feature built into a pad or lining that shows when it has worn to the replacement point.
ABS
Anti-lock braking system. It stops the wheels locking under hard braking so the driver can still steer.

The big ideas

Brakes are section 1 of the MOT inspection manual for cars. Its headings are condition and operation; service brake performance and efficiency; secondary brake; parking brake; additional braking device; ABS; EBS; and brake fluid. A tester inspects condition by looking, and measures performance, usually on a roller brake tester.

Performance is expressed as efficiency: braking force as a percentage of the vehicle's weight. For cars (M1) first used on or after 1 September 2010 the service brake must reach 58%; for older cars it is 50%. The secondary brake must reach 25% and the parking brake 16% for the vehicles the manual groups as "all other vehicles".

Condition items have fixed categories. A pad or lining worn below 1.5 mm is Dangerous; worn down to the wear indicator is Major; an illuminated wear warning alone is not a reason for failure. Brake fluid is checked only in see-through reservoirs, without removing the cap. On cars first used on or after 1 January 2010, ABS must not have been removed or disabled.

Read-through: the teaching steps

  1. Section 1 headings

    1.1 Condition and operation · 1.2 Service brake performance and efficiency · 1.3 Secondary brake · 1.4 Parking brake · 1.5 Additional braking device (retarder) · 1.6 ABS · 1.7 EBS · 1.8 Brake fluid.

    The drawing on the lesson page shows a disc brake: the pads squeeze the disc, which turns with the wheel.

    CaliperBrake discFluidPistonPadsDisc (edge on)
    A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat.
  2. Measuring efficiency

    Efficiency (%) = total braking force ÷ vehicle weight × 100, with force and weight in the same units. A roller brake tester measures the force at each wheel.

    • Cars (M1) first used on or after 1 September 2010: service brake 58%.
    • Earlier cars: 50%.
    • Secondary brake 25%; parking brake 16%.
  3. Pads, linings, discs

    • Pad or lining below 1.5 mm: Dangerous.
    • Worn down to the wear indicator: Major.
    • Wear warning lamp lit on its own: not a reason for failure.
    • Discs or drums significantly and obviously worn: Major (being below the maker's limit alone is not a fail); contaminated with oil or grease: Major; insecure or fractured: Dangerous.
  4. Brake fluid

    Checked only in transparent reservoirs; caps are not removed.

    • Below the minimum mark: Minor.
    • Significantly below: Major.
    • Not visible: Dangerous.
    • Clearly contaminated: Major.
    • Brake fluid warning lamp lit or defective: Minor.
  5. ABS

    On cars first used on or after 1 January 2010, ABS must not be removed or disabled. A warning lamp that does not work, or shows a malfunction, is Major.

  6. Theory only

    This lesson explains what the tester looks for. It is not a guide to brake work: brakes are safety-critical, and work on them is for qualified technicians only.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More The MOT test lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.