▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Finding technical information: service data and schedules – Motor Vehicle Theory motor mechanics lesson

Lesson 18 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Learn where technicians find the right data for a vehicle – handbooks, workshop manuals, bulletins, recalls and service schedules – and how the VIN and service intervals are used.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

This lesson explains how technical information is found and used. The activity uses only the vehicle's handbook. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think manufacturers set both a time and a distance limit for servicing?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using data for a 'similar' car. Specifications can differ between engines, years and options; use the VIN to find the exact data.
  • Ignoring the time limit for low-mileage cars. Fluids and rubber age with time; whichever limit comes first applies.
  • Relying on old printed data. Manufacturers update information and issue bulletins; always use the current version.

Hands-on: With an adult, look in the owner's handbook of a family car (the book only, not the car's engine bay). Find the service schedule, the tyre pressure table and the warning light page. Write down the service interval in both time and distance, and work out when the next service is due from the last service record.

What you will learn

  • I can describe the main sources of technical information.
  • I can explain why the VIN is used to find the exact specification.
  • I can interpret a service interval of 'time or distance, whichever comes first'.
  • I can explain the purpose of bulletins and recalls.
  • I can explain why current, official data must always be used.

Key words

VIN
Vehicle identification number: a unique code identifying one vehicle and its build.
service schedule
The manufacturer's plan of what to check or replace, and when.
workshop manual
Technical information for technicians: procedures, specifications and diagrams.
technical service bulletin
A manufacturer notice about a known issue and the approved fix.
recall
A manufacturer action to fix a safety defect on affected vehicles.

The big ideas

Modern vehicles are too varied to work on from memory. The same model may have several engines, gearboxes, brake systems and software versions. Every torque figure, fluid specification and service interval must come from the manufacturer's data for that exact vehicle.

Finding and using technical information is a core skill. The IMI Level 3 Extended Diploma in Light Vehicle Maintenance and Repair Principles includes ICT for Vehicle Repair among its applied units. This lesson explains the main sources – owner's handbooks, workshop manuals and online systems, bulletins and recall information – how the VIN identifies the exact build, and how service schedules work.

It is theory for understanding; real work using this information is done by trained technicians.

Read-through: the teaching steps

  1. Sources of information

    • Owner's handbook – everyday use, warning lights, basic checks, tyre pressures, service intervals.
    • Workshop manual or manufacturer's online system – procedures, specifications, wiring diagrams.
    • Technical service bulletins – known issues and updated procedures.
    • Recall information – safety defects to be fixed.
    • Parts catalogues – exact part numbers by VIN.
  2. The VIN

    The vehicle identification number is a unique code (on modern cars, 17 characters) stamped on the body and shown on a plate, often visible through the windscreen. It encodes the maker, model, body, engine and production details. Technicians use it to find the exact data and parts for that build.

  3. Service schedules

    Schedules list items to inspect or replace at intervals of time or distance, whichever comes first. Time matters because some items age even when the car is not driven: brake fluid absorbs moisture, rubber perishes and oil degrades. Some cars use service indicators that calculate when service is due from how the car is driven.

  4. Bulletins and recalls

    When a manufacturer finds a common fault, it may issue a technical service bulletin describing an approved fix or updated procedure. If a defect affects safety, it issues a recall, and affected vehicles are fixed, usually free of charge. Checking for outstanding recalls is part of good practice.

  5. Using information correctly

    Good practice:

    • use the VIN to make sure the data matches the vehicle;
    • use the current version – data and procedures are updated;
    • follow specifications exactly: torque, fluid grade, capacities;
    • record what was done and the data used.

    Unofficial sources such as forums can be useful for ideas, but specifications always come from the manufacturer.

  6. Reading a schedule: worked thinking

    For 'every 2 years or 20,000 miles, whichever comes first':

    • a car doing 5,000 miles a year reaches 2 years first (10,000 miles);
    • a car doing 15,000 miles a year reaches 20,000 miles first (after about 16 months).

    The driver's usage decides which limit applies.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Tools and measurement lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.