▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Engine layouts: inline, V, flat and transverse – Motor Vehicle Theory motor mechanics lesson

Lesson 20 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Compare inline, V and flat engines and transverse and longitudinal mounting, and work out firing intervals and cylinder volumes.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

This lesson explains engine layouts for understanding. The activity uses card and a straw. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “If electric cars have no engine, what might happen to engine layout choices over the next 20 years?”
  4. Later: the homework, then the practice test.

Watch out for

  • Using 360° for the four-stroke firing interval. A four-stroke cycle takes two revolutions, 720°.
  • Thinking transverse means the engine is at the back. Transverse describes direction (across the car), not position.
  • Thinking a V engine has two crankshafts. Both banks drive one shared crankshaft.

Hands-on: Make card models of the three layouts: cut small card rectangles for cylinders and arrange four in a row (inline), two pairs at 90° on a straw 'crankshaft' (V) and two pairs lying flat opposite each other (flat). Label each, and write which would fit best across the front of a small car.

What you will learn

  • I can describe inline, V and flat engine layouts.
  • I can explain transverse and longitudinal mounting and why each is used.
  • I can calculate the firing interval of a four-stroke engine.
  • I can calculate swept volume per cylinder from total displacement.
  • I can compare layouts for size, balance and packaging.

Key words

inline engine
An engine with all cylinders in one straight row.
V engine
An engine with two banks of cylinders at an angle sharing one crankshaft.
flat (boxer) engine
An engine with two banks of cylinders lying flat, opposite each other.
transverse
Mounted across the vehicle, crankshaft side to side.
firing interval
The crankshaft angle between one cylinder firing and the next.

The big ideas

A petrol car typically uses a spark-ignited internal combustion engine, as the US Department of Energy describes: fuel is mixed with air in the cylinders and ignited by a spark plug, and the transmission carries the power to the wheels. But engines come in different shapes. The number of cylinders and how they are arranged – in a row, in a V or flat – and which way the engine faces in the car all affect its size, smoothness and how it fits.

This lesson compares the main layouts and teaches two useful calculations: the firing interval and the swept volume per cylinder. It is theory for understanding; engine work is done by trained technicians.

Read-through: the teaching steps

  1. Inline engines

    All the cylinders sit in one straight row above the crankshaft. Inline-3 and inline-4 engines are common in small and medium cars: simple, with one cylinder head. An inline-6 is very smooth but long. See a cylinder in the four-stroke drawing on the lesson page.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. V engines

    Two banks of cylinders sit at an angle (often 60° or 90°) on one crankshaft. A V6 or V8 is much shorter than an inline engine with the same number of cylinders, which helps it fit, but it needs two cylinder heads and more camshafts.

  3. Flat (boxer) engines

    The two banks lie flat, opposite each other, and opposed pistons move in and out together. The engine is low and wide, giving a low centre of gravity and good natural balance.

  4. Transverse and longitudinal

    • Transverse – across the car; common with front-wheel drive, using a transaxle (gearbox and final drive in one).
    • Longitudinal – front to back; common with rear-wheel drive and many four-wheel-drive cars, with a long drive shaft to the rear axle.

    Follow the power path in the drivetrain drawing on the lesson page.

    EngineClutchGearboxPropeller shaftDifferentialTurning force
    How the turning force gets from the engine to the driven wheels (rear-wheel drive shown).
  5. Firing interval

    In a four-stroke engine each cylinder fires once every two crankshaft revolutions – 720°. With the firings spread evenly:

    firing interval = 720° ÷ number of cylinders.

    More cylinders give more frequent, smaller power pulses, so the engine runs more smoothly.

  6. Swept volume per cylinder

    Engine size (displacement) is the total swept volume of all cylinders. For equal cylinders:

    volume per cylinder = total displacement ÷ number of cylinders.

    A 2.0-litre four-cylinder engine has 500 cm³ per cylinder.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Engines lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.