Braking principles: friction, heat and energy – Motor Vehicle Theory motor mechanics lesson
Lesson 64 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Find out how brakes turn a moving car's energy into heat, why stopping distance grows with the square of speed, and why tyre grip and brake temperature set the limits.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson explains the physics of braking: energy, force, grip and heat. It is theory only; brakes are safety-critical and are worked on only by trained technicians. Values such as μ and c are typical. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think lorries and buses have extra ways of slowing down, as well as their friction brakes, on long hills?”
- Later: the homework, then the practice test.
Watch out for
- Thinking double the speed means double the stopping distance. Energy depends on v², so braking distance roughly quadruples.
- Forgetting to change km/h to m/s. Divide km/h by 3.6 before using KE = ½mv².
- Thinking stronger brakes can always stop a car faster. Tyre grip sets the limit. Beyond it the wheels lock and slide.
Hands-on: Rub your palms together quickly for ten seconds and feel the heat: that is friction turning movement into heat, as brakes do. Then roll a toy car down a ramp onto carpet and onto a smooth floor, measure how far it goes on each, and relate the results to grip. With an adult, squeeze a bicycle brake lever gently on a slow-moving bike and feel the rim or disc warm afterwards from a safe distance (do not touch it if hot).
What you will learn
- I can explain how friction brakes turn kinetic energy into heat.
- I can calculate kinetic energy, braking force and deceleration.
- I can calculate the temperature rise of brake discs and explain brake fade.
- I can explain why tyre grip and weight transfer limit braking.
Key words
- kinetic energy
- The energy an object has because it is moving: KE = ½mv².
- deceleration
- The rate at which speed falls, in m/s².
- coefficient of friction (μ)
- Friction force ÷ the force pressing two surfaces together.
- brake fade
- A loss of braking power when the brakes get very hot.
- weight transfer
- The shift of load onto the front wheels when a car slows down.
The big ideas
This is explanation for understanding, not a repair guide. Brakes are safety-critical: any work on them is done only by trained technicians.
A moving car has kinetic energy. To stop it, the brakes must remove all of that energy. Friction brakes do this by pressing pads or shoes onto a spinning disc or drum, turning the energy into heat that then passes into the air.
Two things limit how quickly a car can stop: the grip between the tyres and the road, and the brakes' ability to absorb and get rid of heat. Because kinetic energy depends on speed squared, a small increase in speed needs a large increase in stopping distance. The Highway Code (rule 117) says the safest way to brake is early and lightly.
Read-through: the teaching steps
Energy to remove
Kinetic energy KE = ½mv² (m in kg, v in m/s, KE in joules). To change km/h to m/s, divide by 3.6.
Doubling speed gives four times the energy. A 1,500 kg car at 20 m/s (72 km/h) has 300 kJ; at 40 m/s it has 1,200 kJ.
Friction at the brake
A brake presses friction material onto a rotating disc or drum. The friction force = μ × clamping force, and it acts at the radius of the rub, making a braking torque that opposes the wheel's rotation. The drawing on the lesson page shows a disc brake.
A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat. Force, distance and deceleration
The work done by the braking force equals the energy removed:
F × d = ½mv²
Average deceleration a = v² ÷ (2s). Using F = ma gives the same answer. Halving the stopping distance needs twice the force.
Grip and weight transfer
The tyres can only push on the road up to about μ × the load on them, so the best deceleration on a level road is about μ × g. On a dry road μ may be about 0.8; on ice it can be very low.
When a car slows, load moves onto the front tyres, so they can take more braking force. That is why front brakes are larger and why a brake system shares braking unevenly between the axles.
Heat and fade
The heat goes first into the discs or drums. Temperature rise ΔT = Q ÷ (m × c), where c for cast iron is about 460 J/kg K. Repeated or long braking, such as down a long hill, can make the brakes very hot. Hot friction material can grip less (fade), and very hot brake fluid can boil (a later lesson). Vents in discs and air flow help cool them.
Safe braking
Highway Code rule 117: the safest way to brake is early and lightly. Rule 118: in an emergency brake immediately, but avoid braking so harshly that the wheels lock, because locked wheels can lead to loss of control.
Anti-lock brakes (a later lesson) help keep steering control.
The MOT checks that the brakes can produce enough deceleration: a car first used on or after 1 September 2010 must reach a service brake efficiency of at least 58% (MOT inspection manual section 1, as of November 2026). A later lesson explains brake efficiency.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Brakes lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- DVSA MOT inspection manual: cars and passenger vehicles – 1. Brakes
- The Highway Code – Rules 103 to 158: general rules for all drivers and riders
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.