▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

A logical fault-finding routine – Motor Vehicle Theory motor mechanics lesson

Lesson 108 of 131 in the Motor Vehicle Theory course (ages 16+)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Learn the step-by-step thinking routine technicians use to find faults: confirm, gather information, think, test, find the root cause, put it right and check – and why guessing costs time and money.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.

How to use this lesson

This lesson teaches a problem-solving routine that applies to any system, with simple logarithm and cost calculations. It involves no practical work on a vehicle. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think experienced technicians sometimes jump straight to the answer, and when could that habit let them down?”
  4. Later: the homework, then the practice test.

Watch out for

  • Replacing the part that "usually fails" without testing. The commonest failure is not always this car's failure. Testing first avoids unneeded parts and wasted time.
  • Stopping as soon as a failed part is found. Ask why it failed. Unless the root cause is fixed, the new part may fail too.
  • Handing the car back without re-checking under the same conditions. Verification proves the fix. An intermittent fault may need the same temperature, speed or weather to show itself.

Hands-on: Play "find the fault" with a friend: they hide a coin under one of 16 cups in a row. You may ask only "Is it in this group?" for any group of cups. Using the half-split method, find the coin and count your questions. Repeat by checking one cup at a time. Which method needs fewer questions on average? Cups and a coin only.

What you will learn

  • I can list the stages of a logical fault-finding routine in the right order.
  • I can explain the difference between a symptom, a cause and a root cause.
  • I can use the half-split method and calculate how many tests it needs.
  • I can explain why verifying the repair and recording the work are part of the job.

Key words

symptom
What the driver or technician notices, such as a noise, a warning light or poor running.
root cause
The underlying reason for a fault. Fixing only the symptom leaves the root cause to cause the fault again.
half-split method
Testing in the middle of a system to find which half contains the fault, then halving again until it is found.
verification
Checking, after a repair, that the original fault has gone and nothing new has appeared.

The big ideas

Faced with a fault, the tempting approach is to guess: replace the part that most often fails and hope. Sometimes that works. Often it doesn't, and the customer pays for parts they did not need while the fault is still there.

Professional technicians use a logical routine instead. It is the same whatever the system – engine, brakes, electrics or air conditioning – and it starts with thinking, not with spanners. The IMI's Level 3 diploma in light vehicle maintenance and repair principles, for example, is assessed through practical workshop assessments, assignments and online tests, because diagnosis is a skill that has to be shown in a real workshop.

This lesson explains the routine. It is about how to think; any practical diagnosis on a vehicle is done by, or under the supervision of, a qualified technician.

Read-through: the teaching steps

  1. 1. Confirm the fault

    Start by making sure the fault is real and understood:

    • Listen to the customer's description – what, when, how often, since when.
    • Reproduce the fault if it is safe to do so, under the same conditions (cold start, wet weather, at a certain speed).
    • Note exactly what does and does not work.

    A fault that cannot be confirmed cannot be proven fixed.

  2. 2. Gather information

    Collect everything that might help before touching anything:

    • vehicle history and recent work;
    • stored fault codes and live data (covered in later lessons);
    • the manufacturer's wiring diagrams, specifications and any technical bulletins about known problems;
    • a careful visual inspection: leaks, damage, loose connections, warning lights.

    Many faults are found at this stage.

  3. 3. Think: list the possible causes

    Using knowledge of how the system works, list what could cause these symptoms. Then put them in a sensible order:

    • most likely first;
    • quick and easy to check before slow and difficult;
    • a cause that explains all the symptoms is better than one that explains only some.

    If several systems are affected at once, look for something they share – a fuse, a power supply, a sensor or a network.

  4. 4. Test and narrow it down

    Plan each test to answer a clear question: "Is the fault before or after this point?". Compare each result with the manufacturer's figures.

    The half-split method is efficient on long systems: test in the middle; if the fault is in the first half, test the middle of that half, and so on. With n possible locations, about log₂(n) tests find it – 16 locations need only 4 tests.

    Stop and think again if a result is unexpected; don't ignore it.

  5. 5. Find the root cause and repair

    A failed part is often a symptom of something else. A blown fuse may be caused by a chafed wire; a worn tyre shoulder by a steering fault; a flat battery by a faulty alternator. Fixing only the visible failure means the fault will return.

    Once the root cause is found, the repair is carried out by a qualified technician to the manufacturer's procedure, with the right parts.

  6. 6. Verify and record

    Finally:

    • check the original symptom has gone, under the same conditions as before;
    • check nothing else has been disturbed or has stopped working;
    • clear any fault codes and check they do not return;
    • record the complaint, the cause found and the correction on the job card.

    Recording the work is part of the job: the next technician, the customer and the business all rely on it.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Fault-finding lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.