▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Reading a tyre sidewall: size, load and speed – Garage Basics motor mechanics lesson

Lesson 43 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Decode the letters and numbers on the side of a tyre, from its size to its speed rating and the week it was made, and use them to calculate the tyre's height and diameter.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Reading a sidewall is a look-only activity: keep the car parked and switched off. A calculator helps with the diameter calculation. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think sports cars often have tyres with low aspect ratios?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the aspect ratio is the height in millimetres. It is a percentage of the width. 55 means the sidewall is 55% as tall as the tyre is wide.
  • Thinking the load index is the weight in kilograms. It is a code number; a chart converts it to a load.
  • Inflating a tyre to the maximum pressure on the sidewall. That is the most the tyre can hold, not the right pressure for the car. Use the pressures in the car's handbook.

Hands-on: With an adult, stand beside a parked car that is switched off. Without touching the tyres if they could be hot, find and copy down the size code and the four-digit date code from one sidewall. Work out the sidewall height, the overall diameter and the week and year it was made. Do the same for a bicycle tyre, which shows its size too.

What your child will learn

  • I can explain each part of a tyre size such as 205/55 R16 91V.
  • I can calculate sidewall height from the width and aspect ratio.
  • I can calculate the overall diameter of a wheel and tyre.
  • I can read a speed symbol and a four-digit date code.
  • I can explain why the maximum pressure on the sidewall is not the pressure to use.

Key words

section width
The width of the tyre from sidewall to sidewall, in millimetres: the first number in the size.
aspect ratio
The height of the sidewall as a percentage of the section width.
R
Radial construction: the cords in the tyre body run straight across from bead to bead.
load index
A number that stands for how much weight each tyre can carry. A chart converts it to kilograms.
speed symbol
A letter showing the maximum speed the tyre is rated for, for example H = 130 mph.

The big ideas

The side of every tyre carries a code that tells you exactly what it is. A typical one reads 205/55 R16 91V. A car manufacturer's owner's manual explains it like this: 205 is the section width in millimetres, sidewall to sidewall; 55 is the aspect ratio, the sidewall height as a percentage of the width; R means radial construction; 16 is the wheel rim diameter in inches; 91 is the load index, which stands for how much weight each tyre can carry; and V is the speed symbol, the maximum speed the tyre is rated for (149 mph).

The sidewall also carries a tyre identification number, ending in a four-digit date code: the week and the year the tyre was made. 0308 means the third week of 2008. It also shows a maximum inflation pressure and maximum load. The maximum pressure is the most the tyre can safely hold, not the pressure to use: the right pressures for the car are given in its handbook.

With a little maths the size tells you more. The sidewall height is the width × the aspect ratio. Add two sidewalls to the rim diameter and you have the overall diameter of the wheel and tyre, which affects the speedometer reading.

Read-through: the teaching steps

  1. Breaking down the size

    Take 205/55 R16 91V:

    • 205 – section width in mm
    • 55 – aspect ratio (%)
    • R – radial construction
    • 16 – rim diameter in inches
    • 91 – load index
    • V – speed symbol
    205 / 55 R 16 91 VWidthin mmSidewall height% of widthRadialRim sizein inchesLoad indexSpeed rating
    Reading a tyre size code.
  2. Sidewall height

    sidewall height = section width × aspect ratio ÷ 100

    For 205/55: 205 × 55 ÷ 100 = 112.75 mm. A lower aspect ratio means a thinner, lower sidewall.

  3. Overall diameter

    Change the rim diameter to millimetres (1 inch = 25.4 mm), then add two sidewalls (top and bottom):

    overall diameter = rim (mm) + 2 × sidewall height

    For 205/55 R16: 16 × 25.4 = 406.4 mm; 406.4 + 2 × 112.75 = 631.9 mm.

  4. Speed symbols

    A manufacturer's owner's manual lists them in mph: Q 99, R 106, S 112, T 118, U 124, H 130, V 149, W 168, Y 186. Tyres for very high speeds may show "ZR" in the size. Replacement tyres should have at least the rating the car maker specifies.

  5. Load index and maximum load

    The load index is a code, not a weight. A chart in the tyre maker's or car maker's data converts it to kilograms. The sidewall also states the maximum load in kilograms and pounds. The car maker specifies the minimum load index for each car.

  6. The date code

    The last four digits of the tyre identification number give the week and year it was made. 2219 means week 22 of 2019. Tyres age even when they are not used, so the date matters when tyres are inspected.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Wheels and tyres lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.