▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Front-wheel, rear-wheel and four-wheel drive – Garage Basics motor mechanics lesson

Lesson 22 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out which wheels a car drives, how the drive gets there in each layout, and why weight on the driven wheels matters for grip.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A calculator helps. The main idea is that driven wheels can only push as hard as their grip allows, and grip depends on the weight pressing them down. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think many farm and off-road vehicles are four-wheel drive, while most small city cars are front-wheel drive?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking four-wheel drive helps a car stop on ice. All four wheels already brake on every car. Four-wheel drive helps a car move off and climb, not stop.
  • Thinking the steering wheels must be the driven wheels. In rear-wheel drive the front wheels steer and the rear wheels drive.
  • Thinking a heavier car always has more grip for accelerating. More weight gives more grip, but there is also more mass to get moving. What counts is how the weight sits over the driven wheels.

Hands-on: Look at pictures of five vehicles in a book or online with an adult: a small hatchback, a van, a lorry, a sports car and an off-road vehicle. For each one, guess whether it is front-wheel, rear-wheel or four-wheel drive and say why. Then look up the answers together.

What your child will learn

  • I can describe front-wheel, rear-wheel and four-wheel drive layouts.
  • I can explain why grip depends on the weight on the driven wheels.
  • I can calculate how a car's weight is shared between front and rear.
  • I can give one advantage of each layout.

Key words

front-wheel drive (FWD)
The engine or motor drives the front wheels only.
rear-wheel drive (RWD)
The engine or motor drives the rear wheels only.
four-wheel drive (4WD) or all-wheel drive (AWD)
All four wheels can be driven.
propeller shaft
A long spinning shaft that carries the drive along the car from the gearbox to the rear axle. In the US it is called the driveshaft.
traction
The grip between a tyre and the road that lets a wheel push the car along.

The big ideas

The engine or motor makes the turning force, but only the driven wheels push the car along the road. Cars are built in three main layouts.

In front-wheel drive, the engine, gearbox and differential sit together at the front and drive the front wheels through two short driveshafts. This is compact and leaves more room inside. In rear-wheel drive, a long propeller shaft carries the drive from the gearbox to a differential on the rear axle. In four-wheel drive (or all-wheel drive), drive goes to both axles, usually through an extra unit that splits it between front and rear.

Which layout is best depends on grip. A tyre can only push as hard as its grip allows, and grip depends on how much weight presses the tyre onto the road. Driving all four wheels uses all of the car's weight for grip, which helps on mud, snow and ice.

Read-through: the teaching steps

  1. Front-wheel drive

    Most small and family cars use front-wheel drive. The engine usually sits across the car, with the gearbox and differential in one unit beside it. Two short shafts with flexible joints drive the front wheels, which also steer. The weight of the engine sits over the driven wheels, which helps grip.

    EngineClutchGearboxPropeller shaftDifferentialTurning force
    How the turning force gets from the engine to the driven wheels (rear-wheel drive shown).
  2. Rear-wheel drive

    In rear-wheel drive the engine usually sits along the car. The gearbox passes the drive to a propeller shaft running under the car to the rear axle, where the differential sends it to the rear wheels. The front wheels only steer, which many drivers find gives a pure steering feel. Larger cars, vans and lorries often use this layout.

  3. Four-wheel and all-wheel drive

    With drive to all four wheels, a transfer case or centre differential splits the drive between front and rear axles. All-wheel drive usually works automatically all the time; part-time four-wheel drive is selected for rough ground. Many electric cars get all-wheel drive by fitting one electric motor on each axle.

  4. Grip and weight

    The biggest push a tyre can give before it spins is roughly:

    maximum push = grip factor × weight force on that tyre

    The grip factor (coefficient of friction) is about 0.7 to 1 on a dry road but can fall to around 0.1 on ice. More weight on the driven wheels means more push before they spin.

  5. Weight shifts

    When a car accelerates, weight shifts backwards onto the rear wheels; when it brakes, weight shifts forwards. That is why a powerful rear-wheel-drive car can put more push down when accelerating hard, while a front-wheel-drive car can spin its front wheels if the driver accelerates hard on a slippery road.

  6. Weight distribution

    Weight distribution is often given as a front:rear percentage. A front-engined front-wheel-drive car might be about 60:40. To find the mass on the front wheels, take that percentage of the total mass. Weight force (N) = mass (kg) × 9.8.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Forces, gears and drivetrain lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.