Vacuum system and gyro power – Private Pilot Theory aviation lesson
Lesson 160 of 228 in the Private Pilot Theory course (ages 16+)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
See how a vacuum pump spins the gyros in the attitude and heading indicators, what the suction gauge shows and why aircraft use more than one power source for their gyros.
- Time
- 45 minutes + 10 min homework
- Course
- Private Pilot Theory (ages 16+)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams. Rules and values on this page are given as of November 2026. Always check the current official source (the UK CAA) before relying on them.
How to use this lesson
This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why is it useful for the turn coordinator to use a different power source from the attitude indicator?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the vacuum system powers the airspeed indicator. The airspeed indicator is a pitot-static instrument; vacuum spins gyros.
- Expecting gyros to fail suddenly and obviously. Low suction makes them slow down and drift, so the readings can be wrong without a sudden failure.
- Thinking all gyros share one power source. Most aircraft use at least two sources so that a bank indication remains.
Hands-on: Spin a top or a bicycle wheel held by its axle and try to tilt it – feel rigidity in space. Push gently on the rim and watch it respond about a quarter-turn later (precession).
What you will learn
- I can name the parts of a vacuum system.
- I can say which instruments it usually powers.
- I can state the normal suction range from the handbook.
- I can explain what low suction does to the gyros.
- I can explain why gyros are powered from more than one source.
Key words
- vacuum pump
- A vane-type pump driven by the piston engine that draws air through the gyro instruments.
- suction gauge
- Shows the vacuum in the system, in inches of mercury.
- relief valve
- Limits the suction to the correct value.
- rigidity in space
- A spinning gyro stays fixed in the plane in which it spins.
- precession
- The tilting or turning of a gyro in response to a deflecting force, felt 90° later in the direction of rotation.
The big ideas
Gyroscopic instruments need their rotors spinning fast. In many aircraft this is done by a vacuum system. The PHAK (chapter 8) describes a vane-type vacuum pump driven by the piston engine. Air is drawn through a filter, spins the gyros in the attitude indicator and heading indicator, and passes a relief valve that limits the suction.
The suction gauge shows the vacuum, usually between 4.5 and 5.5 inches of mercury; some aircraft also have a low-vacuum warning light. The handbook warns that when suction is low the gyros slow down, become more prone to precession and the attitude and heading indicators may not give reliable information.
Some aircraft power all gyros by vacuum, pressure or electricity; others use vacuum for the attitude and heading indicators and electricity for the turn coordinator. The handbook says most aircraft have at least two power sources, so a bank indication remains if one fails. This lesson is theory for understanding only.
Read-through: the teaching steps
Why gyros need power
A gyro only shows attitude or heading correctly if its rotor spins fast enough. Two properties make it useful: rigidity in space (it holds its plane of spin) and precession (a force on it is felt 90° later in the direction of rotation).
The “six-pack”: the six basic flight instruments in their usual layout. The vacuum system
Parts from the handbook: pump, relief valve, air filter, suction gauge and tubing. Air goes through the filter, spins the gyros in the attitude and heading indicators, and the relief valve limits suction.
The suction gauge
Normal suction is usually 4.5 to 5.5 inches of mercury, marked on the gauge. Some aircraft add a low-vacuum warning light.
When suction is low
The gyros slow down and precess more easily. The handbook says the attitude and heading indicators may not give reliable information.
More than one power source
Typical layout: vacuum for the attitude and heading indicators, electricity for the turn coordinator. If the vacuum pump fails, the turn coordinator still shows rate and direction of turn. Most aircraft have at least two power sources.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Marked by Classfern |
| Independent practice (three levels) | 13 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Aircraft General Knowledge lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.