▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Aircraft maintenance engineer (UK Part-66) / mechanic (US A&P) – Navigation and Technology aviation lesson

Lesson 64 of 90 in the Navigation and Technology course (ages 14+)

UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version

No aircraft flies without engineers who inspect it, fix it and sign to say it is safe. Discover what aircraft maintenance engineers and mechanics do, and the training and licences behind the job.

Time
35 minutes + 10 min homework
Course
Navigation and Technology (ages 14+)
You need
Paper, a pencil and this page
Marked
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams. Rules and values on this page are given as of November 2026. Always check the current official source (the UK CAA) before relying on them.

How to use this lesson

Sources: UK Part-66 (retained Regulation 1321/2014 Annex III) on legislation.gov.uk; FAA 'become a mechanic' experience page for comparison. Links to careers education, design and technology, and maths (scheduling calculations). Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “An engineer's signature means 'this aircraft is safe'. How would you feel about that responsibility?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking maintenance only happens when something breaks. Most maintenance is planned in advance, so parts are replaced before they fail.
  • Thinking engineers work from memory. Every task follows approved manuals and is recorded, however experienced the engineer.
  • Thinking one licence covers every job. Licences have categories or ratings for different kinds of work, such as mechanical systems or avionics.

Hands-on: Do a 'walk-round inspection' of a bicycle or scooter. Make a checklist (tyres, brakes, chain, bolts, lights), check each item, and record what you find in a log with the date. Decide what needs fixing before it is 'released to service' – and ask an adult to help with any repair.

What you will learn

  • I can describe what aircraft maintenance engineers and mechanics do.
  • I can explain why maintenance is planned and recorded so carefully.
  • I can describe the main licence routes in the UK and the US.
  • I can work out simple maintenance scheduling calculations.

Key words

maintenance
Inspecting, servicing, repairing and replacing parts to keep an aircraft safe to fly.
line maintenance
Quick checks and fixes done between flights, often on the apron.
base maintenance
Big, planned checks done in a hangar, when an aircraft may be out of service for days or weeks.
release to service
The signed statement that maintenance has been done properly and the aircraft is fit to fly.
avionics
Aircraft electronics: radios, navigation, displays, autopilots and their wiring.

The big ideas

Aircraft maintenance engineers keep aircraft safe. They carry out daily checks, fix faults reported by pilots, replace parts when they reach their time limit, and complete huge planned inspections in hangars. Every job is recorded, and a licensed engineer signs a certificate of release to service to say the aircraft is fit to fly.

In the UK, licences come under Part-66. The rules list several categories: category A for simple line tasks, B1 for the aircraft's structure, power plants and mechanical and electrical systems, B2 for avionics and electrical systems, and C for releasing an aircraft after base maintenance in a hangar. There are also licences for light aircraft, gliders and balloons. Applicants must be at least 18, pass examinations on many modules and build up practical experience. Many people start through an apprenticeship with an airline or maintenance company.

The job suits people who are practical, careful and honest, and who enjoy solving problems. It can involve shift work, working outside in all weathers on the apron, and working inside huge hangars on the biggest aircraft.

Read-through: the teaching steps

  1. Line and base maintenance

    • Line maintenance – checks and quick fixes between flights: walk-round inspections, tyre and brake checks, topping up oil, fixing small faults.
    • Base maintenance – big planned checks in a hangar, where panels come off, structures are inspected in detail and many parts are replaced.
  2. Everything has a schedule

    Parts and inspections are due after a number of flying hours, a number of flights (take-offs and landings) or a number of months – whichever comes first. Engineers and planners track every part so nothing is missed.

  3. Tools of the trade

    Engineers use torque wrenches (to tighten bolts to an exact force), borescopes (tiny cameras to look inside jet engines), test sets for avionics, and detailed maintenance manuals. They never guess – every step follows the approved instructions.

  4. Licences

    UK Part-66 licence categories include:

    • A – simple line tasks
    • B1 – structure, power plants, mechanical and electrical systems
    • B2 – avionics and electrical systems
    • C – release after base maintenance

    Applicants must be at least 18 and pass exams and gain experience.

  5. Signing for safety

    When the work is done, a licensed engineer signs to say it was done correctly and the aircraft is fit to fly. This signature is a serious legal and moral responsibility – people's lives depend on it. That is why honesty and attention to detail matter so much.

  6. Getting started

    Useful school subjects: mathematics, physics, design and technology and English (manuals are detailed). Many engineers start through an apprenticeship or a technical college course. Some specialise in avionics, jet engines, structures or composites.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Careers lessons · Navigation and Technology course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.