▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Aerospace engineer – Navigation and Technology aviation lesson

Lesson 65 of 90 in the Navigation and Technology course (ages 14+)

UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version

Somebody designs every wing, jet engine, satellite and spacecraft – and then proves it works. Find out what aerospace engineers do, the mathematics and science they use, and the routes into the job.

Time
35 minutes + 10 min homework
Course
Navigation and Technology (ages 14+)
You need
Paper, a pencil and this page
Marked
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.

How to use this lesson

Source: National Careers Service job profile for aerospace engineer (gov.uk). Links to careers education, GCSE mathematics (percentages) and physics, and design and technology. Every answer is marked straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “If you could design any aircraft or spacecraft, what problem would it solve?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking aerospace engineers only design whole aircraft. Most work on one part – a wing section, a jet engine component, software or a test programme – as part of a big team.
  • Thinking you must be brilliant at everything. Strong mathematics and physics help most, but teamwork, care and communication matter just as much.
  • Thinking university is the only way in. In the UK, degree apprenticeships let you work and study at the same time; technician routes exist too.

Hands-on: Engineer a paper bridge: using only two sheets of A4 paper and some sticky tape, build a bridge across a 20 cm gap between two books. Test how many coins it can hold. Then try to make it hold the same number of coins using less paper. That is the aerospace engineer's challenge: strong but light.

What you will learn

  • I can describe what aerospace engineers do.
  • I can explain the difference between aeronautical and astronautical engineering.
  • I can name the school subjects and routes that lead into aerospace engineering.
  • I can use a simple engineering calculation, such as a strength-to-weight comparison.

Key words

aerospace engineer
An engineer who designs, develops and tests aircraft, spacecraft and satellites.
aeronautical
To do with aircraft that fly in the atmosphere.
astronautical
To do with spacecraft and flight beyond the atmosphere.
prototype
An early working version of a design, built to be tested.
CAD
Computer-aided design: drawing and testing designs on a computer.

The big ideas

Aerospace engineers design, build and test aircraft, jet engines, satellites and spacecraft. The UK government's National Careers Service lists tasks such as building and testing prototypes using computer-aided design (CAD), analysing test results to improve aircraft structures and aerodynamics, researching new fuels and ways to cut emissions, developing instruments and software for spacecraft, managing projects and planning maintenance programmes.

There are two main routes in. One is a university degree in aerospace engineering or a related subject such as mechanical, electrical or software engineering, physics or mathematics; degree courses usually ask for A levels including mathematics and physics. The other is a degree apprenticeship, where you work for an employer and study for a degree at the same time – usually after GCSEs and A levels or equivalent.

With experience, aerospace engineers can specialise in areas like aerodynamics, fuel efficiency, satellites and space technology, or even air accident investigation. The job needs strong mathematics and physics, careful thinking and good teamwork, because every aircraft is designed by large teams working together.

Read-through: the teaching steps

  1. Air or space?

    • Aeronautical engineering – aircraft in the atmosphere: wings, aerodynamics, jet engines, structures.
    • Astronautical engineering – spacecraft and satellites: orbits, rockets, life support, heat shields.

    Many engineers work across both, and both are called aerospace engineering.

  2. What a working day might include

    • Designing parts on CAD software
    • Running computer simulations of airflow or stress
    • Testing prototypes in wind tunnels or test rigs
    • Analysing test data to improve a design
    • Writing reports and working with other teams
    • Checking that designs meet safety rules
  3. Many kinds of specialist

    Aerospace engineers specialise in areas such as aerodynamics, structures and materials, propulsion (jet engines and rockets), avionics and software, flight controls, testing, or manufacturing. Some move into management, safety or accident investigation.

  4. Light but strong

    Every kilogram matters in aerospace: extra weight means more fuel. Engineers choose materials with a high strength-to-weight ratio, such as light metal alloys, titanium and carbon composites, and design shapes that are strong but light.

  5. Routes in

    • University: a degree in aerospace engineering or a related subject (mechanical, electrical, software engineering, physics, mathematics) – usually needing A levels in mathematics and physics.
    • Degree apprenticeship: work and study at the same time, usually after GCSEs and A levels.

    Joining a professional body such as the Royal Aeronautical Society helps with development.

  6. Start now

    Useful school subjects: mathematics, physics, computing and design and technology. Clubs that build model rockets, gliders, drones or robots are great practice. Learning to explain your ideas clearly matters too – engineers spend a lot of time communicating.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Careers lessons · Navigation and Technology course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.