▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Steering: how turning a wheel turns a car – Young Mechanics motor mechanics lesson

Lesson 15 of 40 in the Young Mechanics course (ages 8–11)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Follow the turning of the steering wheel down the steering column to the rack and pinion, and see how it points the front wheels left and right.

Time
35 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Corrugated card from a delivery box works well for the model. Please do not let children play in the driver's seat or with the steering wheel of a real car. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think big trucks and buses need power steering more than small cars?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the steering wheel is joined straight to the front wheels. The column, rack and pinion and track rods are in between. They turn a round movement into a sideways push.
  • Thinking all four wheels steer on a normal car. On most cars only the front wheels steer. The back wheels follow.
  • Thinking power steering drives the car by itself. Power steering only adds strength. The driver decides where the car goes.

Hands-on: Make a card rack and pinion. Cut a long strip of corrugated card (the ridged inside of a cardboard box) for the rack, and roll a short strip of the same card round a pencil for the pinion. Lay the rack flat, rest the pinion on it with the ridges touching, and turn the pencil. Watch the rack slide sideways. Then push a toy car round a curve and notice how the front wheels point into the turn.

What your child will learn

  • I can name the steering wheel, steering column, rack and pinion, and track rods.
  • I can explain how a rack and pinion turns a round movement into a sideways push.
  • I can say what power steering does.
  • I can explain why the inside front wheel turns a little more sharply on a corner.

Key words

steering wheel
The wheel the driver turns to point the car left or right.
steering column
The shaft that joins the steering wheel to the steering parts under the hood.
pinion
A small gear on the end of the steering column.
rack
A straight bar with teeth that slides left or right when the pinion turns.
track rod
A rod that joins the end of the rack to a front wheel and pushes or pulls it.
power steering
A helper system that makes the steering wheel easier to turn.

The big ideas

When the driver turns the steering wheel, the front wheels swing to point left or right, and the car follows them round the corner. But how does a round movement of the steering wheel make the wheels swing?

The steering wheel sits on top of a shaft called the steering column. At the bottom of the column is a small gear called a pinion. Its teeth fit into a straight toothed bar called a rack. When the pinion turns, it pushes the rack sideways – left or right. Rods at each end of the rack, called track rods, push and pull the front wheels so they pivot.

Most cars also have power steering, which helps the driver so the wheel is easy to turn even when the car is moving slowly. Steering is so important for safety that drivers make sure it works before a journey, and only trained mechanics ever work on it.

Read-through: the teaching steps

  1. The steering wheel and column

    The driver holds the steering wheel. Turning it turns the steering column, a long shaft that runs down from the wheel, through the front of the car, to the steering parts.

  2. Rack and pinion

    At the bottom of the column is the pinion, a small round gear. Its teeth mesh with the rack, a straight bar with teeth along it.

    • Turn the pinion one way – the rack slides left
    • Turn it the other way – the rack slides right

    So a turning movement becomes a sliding movement. See the gears in the drawing on the lesson page.

    Driving gear10 teethDriven gear30 teethfast
    Gear ratio = teeth on the driven gear ÷ teeth on the driving gear = 30 ÷ 10 = 3 to 1.
  3. Track rods and wheels

    Each end of the rack is joined to a track rod, and each track rod is joined to a front wheel. When the rack slides, one track rod pushes and the other pulls, so both front wheels pivot and point in the same direction.

  4. Power steering

    A heavy car standing still is hard to steer by hand alone. Power steering uses an electric motor (or, on older cars, a pump and fluid) to help push the rack. The driver still controls where the car goes; the helper just adds strength.

  5. The inside wheel turns more

    On a corner, the inside front wheel follows a tighter curve than the outside one. So the steering is designed to turn the inside wheel a little more sharply. This stops the tires scrubbing sideways.

  6. Steering and safety

    Steering is checked before a journey, and steering and suspension are part of a state safety inspection where states have one. Steering parts are safety-critical, so only trained mechanics inspect or repair them. Children never touch steering parts, and never play with the steering wheel of a car.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minGraded by Classfern
Independent practice (three levels)8 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.