Hybrid layouts: series, parallel and power-split – Vehicles and Technology motor mechanics lesson
Lesson 7 of 50 in the Vehicles and Technology course (ages 14+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
See how a hybrid car combines an engine and electric motors in three different ways – series, parallel and power-split – and why each layout suits different kinds of driving.
- Time
- 45 minutes + 10 min homework
- Course
- Vehicles and Technology (ages 14+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
How to use this lesson
The card gear set needs scissors and paper fasteners; an adult can help cut the circles. Nothing in this lesson involves a real car. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If you drove mostly short trips in a busy town, which hybrid layout would you choose, and why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking a standard hybrid must be plugged in to charge. A standard hybrid charges its battery from the engine and from regenerative braking. Only plug-in hybrids are designed to be plugged in.
- Thinking a series hybrid's engine drives the wheels. In a series hybrid only the motor drives the wheels; the engine only makes electricity.
- Thinking more conversions always help. Every conversion loses energy. Hybrids win by letting the engine work efficiently and by recovering braking energy, not by converting more.
Hands-on: Draw three flow diagrams side by side, one each for series, parallel and power-split. Use boxes for fuel tank, engine, dynamo, battery, inverter, motor, transmission and wheels, and arrows for energy. Color the mechanical paths blue and the electrical paths orange. Then build a paper planetary gear set: cut a small circle (sun), a large ring and three small circles (planets) from card and pin the planets to a card strip (carrier) with paper fasteners. Turn the parts by hand to see how holding one part changes how the other two move.
What you will learn
- I can explain what makes a vehicle a hybrid electric vehicle.
- I can describe series, parallel and power-split hybrid layouts and trace the energy path in each.
- I can explain how a planetary gear set lets a power-split hybrid blend engine and motor power.
- I can explain how a hybrid saves fuel: regeneration, stop-start, motor assist and a smaller engine.
- I can use simple efficiency sums to compare energy paths.
Key words
- hybrid electric vehicle (HEV)
- A vehicle with an engine and one or more electric motors using energy stored in a battery. A standard hybrid cannot be plugged in.
- series hybrid
- A layout where only the electric motor drives the wheels; the engine turns a dynamo to make electricity.
- parallel hybrid
- A layout where the engine and the motor can both drive the wheels directly.
- power-split hybrid
- A layout that uses a planetary gear set to divide the engine's power between driving the wheels and making electricity.
- planetary gear set
- A sun gear, planet gears on a carrier, and an outer ring gear – three connections that can share power in different ways.
- stop-start
- Switching the engine off when the vehicle stops and restarting it when the driver moves off.
The big ideas
A hybrid electric vehicle has two sources of driving power: an engine and one or more electric motors with a battery. The US Department of Energy's Alternative Fuels Data Center (AFDC) notes that a standard hybrid cannot be plugged in; its battery is charged by regenerative braking and by the engine. fueleconomy.gov explains that the motor assists when accelerating, overtaking and climbing hills, that in some hybrids the motor alone moves the car at low speeds, and that this allows a smaller, more efficient engine.
Engineers can connect the engine and motor in different ways. In a series hybrid, only the motor drives the wheels and the engine just makes electricity. In a parallel hybrid, the engine and motor can both drive the wheels. In a power-split hybrid, a planetary gear set divides the engine's power, sending some to the wheels and some to make electricity, and the balance can change continuously.
Each layout is a trade-off between efficiency, cost, weight and complexity, and suits different driving. This is explanation for understanding, not a repair guide; hybrid high-voltage systems are for trained technicians only.
Read-through: the teaching steps
What all hybrids share
Every hybrid has an engine, a fuel tank, at least one electric motor, a traction battery and power electronics. They save fuel in four main ways:
- Regenerative braking recaptures energy normally lost when slowing down.
- Stop-start switches the engine off when the car stops.
- The motor assists when extra power is needed, so the engine can be smaller.
- The engine can be kept running near its most efficient speed and load.
How the turning force gets from the engine to the driven wheels (rear-wheel drive shown). Series hybrid
In a series hybrid, the engine has no mechanical link to the wheels. It drives a dynamo that makes electricity, which charges the battery or runs the motor directly. Only the motor turns the wheels.
- Energy path: fuel → engine → dynamo → (battery) → motor → wheels
- Strength: the engine can run at its best speed whatever the car is doing – good in stop-start city driving
- Weakness: at steady high speed, converting all the engine's work to electricity and back loses energy
The AFDC describes plug-in versions of this layout as extended-range electric vehicles.
Parallel hybrid
In a parallel hybrid, the engine and the motor are both connected to the wheels through the transmission. Either or both can drive. The motor is often placed between the engine and the transmission.
- Strength: at steady speed the engine drives the wheels directly with no conversion losses
- Weakness: the engine speed is tied to road speed through the gears, so it cannot always run at its best point
Mild hybrids are usually simple parallel designs with a small motor that helps the engine but cannot drive the car far on its own.
Power-split hybrid
A power-split hybrid uses a planetary gear set with three connections: the engine on the planet carrier, one motor-dynamo on the sun gear, and the ring gear linked to the wheels and to a second motor.
By controlling how fast the sun-gear unit spins, the control system changes how the engine's power is shared between the wheels and making electricity. This works like a continuously variable transmission and lets the engine run near its best speed – combining strengths of series and parallel layouts, at the cost of complexity.
Comparing the energy paths
Every conversion loses a little energy. Suppose each step is a certain percentage efficient – multiply the efficiencies to find the overall figure.
- Dynamo 92% × inverter 97% × motor 93% ≈ 83% for the electric path
- A direct gear path might be about 95%
So the electric path costs energy at steady speed, but lets the engine work far more efficiently in stop-start conditions. Designers balance these.
Hybrid figures
fueleconomy.gov estimates where a hybrid's energy goes. In combined driving about 24–38% of the fuel energy reaches the wheels, with regenerative braking recovering about 5–9%. In city driving regeneration recovers 8–14%, but on the highway only 2–4%.
Safety
Hybrids carry high-voltage systems just as all-electric cars do. They can be silent, the engine may start by itself when the system is on, and high-voltage work needs specific training. Learners study layouts from diagrams only; real vehicles are looked at only with a qualified adult, parked and switched off.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Electric and hybrid vehicles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- US Department of Energy, Alternative Fuels Data Center – How do hybrid electric cars work?
- US Department of Energy, Alternative Fuels Data Center – Plug-in hybrid electric vehicle basics
- US Department of Energy and EPA, fueleconomy.gov – How hybrids work
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.