▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Bicycle frames, forks and materials – Vehicles and Technology motor mechanics lesson

Lesson 21 of 50 in the Vehicles and Technology course (ages 14+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out why most bicycle frames are built from triangles, how steel, aluminum, titanium and carbon fiber compare, and what the fork does.

Time
40 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

The card and straw models need only household items. If you look at a real bicycle together, hold or prop it safely and look without taking anything apart. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “If you were designing a bicycle for a long-distance tour through rough country, which frame material would you choose, and why?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the lightest material always makes the best frame. Stiffness, strength, fatigue life, comfort, repairability and cost matter too.
  • Thinking steel frames must be heavy. Thin-walled steel tubes can make a frame that is only a little heavier than aluminum.
  • Thinking a carbon frame with no visible crack after a crash must be fine. Carbon damage can be inside the layers; a specialist checks it.

Hands-on: Make a square and a triangle from card strips joined with split pins. Push on a corner of each and compare. Then build a small diamond "frame" from straws and tape, and see how much weight it holds when you add a triangle-making brace. With an adult, look at a real bicycle and name each tube.

What you will learn

  • I can name the main tubes of a diamond bicycle frame.
  • I can explain why triangles make a frame stiff.
  • I can compare steel, aluminum, titanium and carbon fiber as frame materials.
  • I can use density to compare the mass of tubes made from different materials.
  • I can explain what the fork and its offset do.

Key words

diamond frame
The classic frame shape made of two triangles: the main triangle and the rear triangle.
head tube
The short front tube that holds the fork's steerer and its bearings.
chainstays
The tubes running from the bottom bracket back to the rear wheel.
density
Mass per unit volume, for example grams per cubic centimeter (g/cm³).
fatigue
Weakening of a material under many repeated loads, which can end in a crack.
fork offset
How far forward of the steering axis the front wheel's axle sits.

The big ideas

A bicycle frame has to be stiff enough to carry the rider and pedaling forces without bending, strong enough to survive bumps for years, and as light as sensible. Since the 1890s the most common answer has been the diamond frame: two triangles of tube joined together. A triangle cannot change shape unless one of its sides changes length, so triangles make a light, stiff structure.

The choice of material changes the weight, stiffness, comfort, cost and how the frame fails. Steel is strong, tough and easy to repair; aluminum is light and stiff; titanium resists corrosion and fatigue; carbon fiber can be shaped to be stiff in one direction and compliant in another.

At the front, the fork holds the wheel and turns in the head tube to steer. Its forward offset helps give the bicycle stable, self-centering steering. Any frame or fork can crack after a crash, so a damaged bicycle is checked by a qualified bicycle mechanic before it is ridden again.

Read-through: the teaching steps

  1. The diamond frame

    • Main triangle: top tube, down tube and seat tube, with the head tube at the front
    • Rear triangle: seat stays and chainstays, meeting at the rear dropouts where the wheel fits
    • Bottom bracket: the shell where the cranks turn

    The bicycle drawing on the lesson page labels these parts.

    SaddleHandlebarsFramePedal and crankChainRear wheel and tireFront wheelBrake
    The main parts of a bicycle.
  2. Why triangles?

    Push on the corner of a square made of card strips joined at the corners and it squashes into a diamond. A triangle will not change shape unless a side gets longer or shorter. So triangulated frames resist bending and twisting with little material, which keeps them light.

  3. Steel and aluminum

    Steel is about three times as dense as aluminum, but much stronger and stiffer per tube. Steel frames use thin-walled tubes and are tough and repairable; they can rust if not protected. Aluminum frames use fatter tubes to make up for the lower stiffness; they are light and do not rust in the same way, but aluminum has no fatigue limit, so designers keep stresses low.

  4. Titanium and carbon fiber

    Titanium is about 60% of the density of steel, resists corrosion and fatigue well, but is costly to work. Carbon fiber is fibers set in resin; the fibers can be laid in chosen directions, so a frame can be stiff where it needs to be and comfortable elsewhere. Damage inside carbon can be hidden, so after a crash it is inspected by a specialist.

  5. Density and mass

    mass = density × volume

    Typical densities: steel about 7.8 g/cm³, titanium about 4.5 g/cm³, aluminum about 2.7 g/cm³, carbon-fiber composite about 1.6 g/cm³. A tube with 100 cm³ of material weighs about 780 g in steel and about 270 g in aluminum – which is why aluminum tubes can be fatter and still lighter.

  6. The fork

    The fork holds the front wheel and its steerer tube turns in bearings in the head tube. The fork blades usually bend or angle forward so the axle sits ahead of the steering axis – the offset. Together with the head angle this sets the trail, which gives steering its stability. Suspension forks on mountain bikes add a spring and damping.

  7. Safety

    A cracked or bent frame or fork can fail suddenly. After any crash, a bicycle is checked by a qualified bicycle mechanic before riding. When you look at a bicycle's frame, an adult is with you and the bicycle is propped safely or held, and you look rather than take anything apart.

    In the US, bicycles sold to the public must meet the Consumer Product Safety Commission's bicycle requirements (16 CFR 1512), which cover items such as brakes, reflectors and, on single-sprocket bikes, a chain guard.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Bicycles lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.