▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

A history of car safety: belts, crumple zones and airbags – Vehicles and Technology motor mechanics lesson

Lesson 34 of 50 in the Vehicles and Technology course (ages 14+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Discover how seat belts, crumple zones and airbags work together to stretch out the time of a crash – and how each became normal in everyday cars.

Time
40 minutes + 10 min homework
Course
Vehicles and Technology (ages 14+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

How to use this lesson

The force = change in momentum ÷ time idea is GCSE / high-school physics. Practice one more example with your own numbers. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Safety features save lives but add cost and weight. Should every new safety idea be made compulsory straight away? Why or why not?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the stiffest car is the safest. A car that does not crumple stops almost instantly, so the people inside feel a bigger force. Crumple zones plus a strong safety cell are safer.
  • Thinking airbags mean you do not need a seat belt. Airbags are designed to work with belts. Without a belt, a person can hit the bag too early or be thrown about.
  • Thinking a crumpled car after a crash means it was badly made. The crumple zone did its job: it absorbed energy that would otherwise have gone into the people inside.

Hands-on: Egg-crash test with an adult: build a small paper or card 'car' on a toy truck or trolley and put a raw egg (in a sealed food bag) inside. Roll it down a short ramp into a wall of books. Try again with a folded-card crumple zone on the front, and again with a 'seat belt' made from a strip of paper. Compare what happens. Wash hands afterwards. Never test anything on a real vehicle.

What you will learn

  • I can explain, using force and time, why crumple zones and airbags reduce injuries.
  • I can describe how a seat belt protects a person in a crash.
  • I can put the main car safety developments in rough order.
  • I can explain why airbags are designed to work with seat belts, not instead of them.

Key words

crumple zone
A part of the car's body, at the front or back, designed to fold up in a controlled way in a crash, absorbing energy.
safety cell
The strong central part of the body around the people inside, designed not to collapse.
airbag
A fabric bag that inflates in a fraction of a second in a crash, cushioning the person.
pretensioner
A device that pulls a seat belt tight at the start of a crash.
momentum
Mass × velocity. Force = change in momentum ÷ time taken.
passive safety
Features that protect people once a crash happens, such as belts, crumple zones and airbags.

The big ideas

Early cars had almost no protection for the people inside. As cars became faster and more common, engineers started to study what actually happens in a crash. The key physics is simple: when a moving person is brought to a stop, the force on them depends on how quickly it happens. Force = change in momentum ÷ time. Make the stop take longer, and the force falls.

A car maker's own history credits the engineer Béla Barényi with the idea of a car body with a soft front and rear and a rigid cabin. The crumple zone was introduced in a production sedan in 1959. The front and rear fold up in a controlled way, while the strong safety cell protects the people inside. Seat belts hold people in that safety cell, spreading the force across the strong bones of the hips and chest, and airbags add a cushion between the person and the hard parts of the car.

These systems are designed to work together. Electronic aids such as ABS and stability control, which arrived later, help drivers avoid crashes in the first place. Airbags and belt pretensioners contain small explosive charges, so in a workshop only trained technicians handle them, following the manufacturer's procedures.

Read-through: the teaching steps

  1. The physics of a crash

    A person moving with the car has momentum (mass × velocity). In a crash that momentum has to fall to zero.

    Force = change in momentum ÷ time

    • Stop in a very short time → very large force → serious injury
    • Stop over a longer time → smaller force → better chance of walking away

    Every passive safety feature tries to make the stop longer and spread the force over a bigger, stronger area of the body.

  2. Crumple zones and the safety cell

    Before crumple zones, people thought a very stiff car was safest. In fact a stiff car stops almost instantly, and the people inside take a huge force. Crumple zones fold in a planned way, so the cabin slows down more gently. The safety cell around the passengers stays strong so there is space left to survive.

    Mercedes-Benz records the first production car with crumple zones as its 1959 sedan, based on Barényi's work.

  3. Seat belts

    Without a belt, a person keeps moving when the car stops, until they hit the dashboard, windshield or another person – or are thrown out. NHTSA says ejection from a vehicle is almost always deadly. A lap and shoulder belt holds a person across the pelvis and rib cage, which can take crash forces better.

    NHTSA estimates that seat belts saved 14,955 lives in 2017 alone, and about 374,276 lives from 1975 to 2017. For front-seat passenger car occupants, wearing a belt cuts the risk of fatal injury by 45%.

  4. Airbags

    NHTSA explains that in a moderate to severe crash, the air bag control unit signals an inflator, and the bag inflates in less than 1/20 of a second. Frontal air bags have been standard in all passenger vehicles since the late 1990s and have saved more than 50,000 lives over 30 years.

    Air bags are designed to work with seat belts, not replace them. NHTSA recommends that children under 13 ride in the back seat and that drivers keep at least 10 inches between the air bag cover and their breastbone. Air bag modules contain explosive charges, so only trained technicians handle them, following the manufacturer's procedures.

  5. Helping the driver avoid the crash

    Later systems work before a crash, not during it (active safety):

    • ABS stops the wheels locking under hard braking, so the driver can still steer
    • Electronic stability control (introduced in the mid-1990s) brakes individual wheels to help stop a skid

    The drawing on the lesson page shows a disc brake, which ABS controls.

    CaliperBrake discFluidPistonPadsDisc (edge on)
    A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat.
  6. Checking safety systems today

    Safety systems are checked in state inspections where a state has one – rules are set by each state. Virginia's inspection, for example, includes seat belts and the air bag system and its readiness light. An inspector looks at warning lights and condition; the air bag system itself is never taken apart in an inspection.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More History of the automobile lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.