▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Three-way catalysts and oxygen sensors – Motor Vehicle Theory motor mechanics lesson

Lesson 48 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how a three-way catalyst cleans carbon monoxide, hydrocarbons and oxides of nitrogen at the same time, and how oxygen sensors before and after it keep it working and check that it does.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

This lesson explains how catalytic converters and oxygen sensors work. Catalytic converters run extremely hot and can cause burns or start fires; exhaust work is for trained technicians. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “A catalyst works badly for the first minute after a cold start. What ideas could engineers use to cut emissions in that first minute?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a catalyst is used up as it cleans the exhaust. A catalyst speeds up reactions without being consumed. Converters lose performance through aging, overheating or contamination, not by being used up.
  • Thinking a three-way catalyst works on a diesel. A diesel always has spare oxygen in its exhaust, so the NOx reaction cannot work. Diesels use an oxidation catalyst plus SCR and a particulate filter.
  • Thinking a high oxygen sensor voltage means a lean mixture. For a zirconia switching sensor, high voltage (about 0.8–0.9 V) means rich; low voltage (about 0.1–0.2 V) means lean.

Hands-on: Surface area model: cut a sheet of A4 paper into a tight zigzag fold (like a fan) and stand it inside a cardboard tube, then compare how much paper fits inside with a single flat strip – this is why converters use a honeycomb. Then draw a graph by hand of two oxygen sensor signals over 10 seconds: an upstream sensor switching up and down eight times, and a downstream one from a healthy catalyst staying fairly steady. Never touch an exhaust or catalytic converter: they stay very hot long after the engine stops.

What you will learn

  • I can describe how a three-way catalyst is built and what the precious metals do.
  • I can write word or symbol equations for the three main reactions in a three-way catalyst.
  • I can explain why a three-way catalyst needs a mixture close to lambda 1 and needs to be hot.
  • I can describe how a zirconia oxygen sensor's signal shows rich or lean, and how a second sensor checks the catalyst.
  • I can calculate a catalyst's conversion efficiency.

Key words

three-way catalyst
A catalytic converter that reduces carbon monoxide, hydrocarbons and oxides of nitrogen together. Used on gasoline engines.
catalyst
A substance that speeds up a chemical reaction without being used up itself.
light-off
The temperature at which a catalyst starts to work effectively. Until then, much of the exhaust passes through untreated.
oxygen storage
The ability of materials in the catalyst to hold oxygen when the exhaust is lean and release it when it is rich.
oxygen sensor
A sensor in the exhaust whose output shows whether there is spare oxygen (lean) or not (rich). Also called a lambda sensor.

The big ideas

The US Department of Energy lists an exhaust system with a three-way catalyst among the main parts of a gasoline car, and describes the electronic control module as controlling the emissions system. The catalytic converter sits in the exhaust, usually close to the engine so it warms up quickly. Inside, three reactions happen at once: carbon monoxide and hydrocarbons are oxidized to carbon dioxide and water, and oxides of nitrogen are reduced to nitrogen.

Oxidizing needs oxygen; reducing needs a shortage of it. Both can happen well only when the mixture swings in a narrow band around lambda 1. That is why the catalyst works as a team with oxygen sensors and the engine control unit, which keeps adjusting the fuel to hold that band.

This lesson explains the chemistry and control. It is not a repair guide: catalytic converters run extremely hot and can cause burns or start fires on dry grass, and exhaust work is for trained technicians.

Read-through: the teaching steps

  1. Inside the converter

    A catalytic converter is a steel can containing a ceramic or metal honeycomb with thousands of tiny channels. The channel walls are coated with a rough washcoat that gives an enormous surface area, and on it are very small amounts of precious metals: typically platinum and palladium (mainly for oxidation) and rhodium (mainly for reducing NOx).

    The exhaust flows through the channels and touches the coated walls. The metals provide sites where the reactions happen quickly at exhaust temperatures, without being used up.

  2. The three reactions

    In a three-way catalyst:

    • Carbon monoxide is oxidized: 2CO + O₂ → 2CO₂.
    • Hydrocarbons are oxidized to carbon dioxide and water, for example C₃H₈ + 5O₂ → 3CO₂ + 4H₂O.
    • Nitric oxide is reduced, using carbon monoxide or hydrogen as the reducing agent: 2NO + 2CO → N₂ + 2CO₂.

    The first two need oxygen. The third works best when there is little spare oxygen, so the NO gives up its oxygen to the CO.

  3. The lambda window

    If the mixture is lean (λ above 1), there is plenty of oxygen: CO and HC are cleaned well, but NOx passes through, because the reducing agents are burnt by the spare oxygen instead.

    If it is rich (λ below 1), NOx is cleaned well, but there is not enough oxygen to finish off the CO and HC.

    Only in a narrow window around λ = 1 are all three converted efficiently. Materials in the washcoat, such as cerium oxide, store oxygen during slightly lean moments and release it during slightly rich ones, which widens the window a little.

  4. Warming up

    A catalyst does almost nothing when cold. It has to reach its light-off temperature – typically several hundred degrees – before the reactions run quickly. Most of a modern car's emissions on a short trip come from the first minute or so after a cold start.

    To shorten that time, converters are mounted close to the engine, and the control unit may retard the ignition timing just after a cold start to send hotter exhaust to the catalyst. A converter also gets very hot in normal running, which is why it has heat shields and why a car must never be parked over dry grass or leaves.

  5. How a zirconia oxygen sensor works

    The common oxygen sensor has a thimble of zirconia ceramic with platinum electrodes inside and out. One side touches the exhaust; the other touches outside air. When hot, zirconia lets oxygen ions pass through it, and the difference in oxygen between the two sides produces a voltage:

    • Rich exhaust (little oxygen): high voltage, typically near 0.8–0.9 V.
    • Lean exhaust (spare oxygen): low voltage, typically near 0.1–0.2 V.

    The control unit trims the fuel so the signal switches back and forth across λ = 1 many times a second. Many engines now use a wideband sensor before the catalyst, which gives an accurate reading of the actual lambda value rather than just rich or lean.

  6. The second sensor: checking the catalyst

    A second oxygen sensor after the catalyst watches what comes out. A healthy catalyst stores oxygen, so it smooths out the rich–lean swings: the downstream sensor shows a fairly steady signal while the upstream one switches rapidly.

    As a catalyst ages and loses oxygen storage, the downstream signal starts to copy the upstream one. The control unit notices, stores a fault code and lights the engine warning lamp. Catalysts can be damaged by misfires (unburnt fuel burns inside and overheats them), by oil or coolant entering the exhaust, and by the wrong fuel or additives.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Fuel, ignition and emissions lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.