Hazardous substances: used oil, brake dust, coolant and battery acid – Motor Vehicle Theory motor mechanics lesson
Lesson 6 of 131 in the Motor Vehicle Theory course (ages 16+)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Learn why used oil, brake dust, coolant, battery acid and paint are hazardous, how they harm the body, and how the COSHH approach controls them.
- Time
- 45 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.
How to use this lesson
This lesson explains hazards and HSE COSHH guidance for understanding, dated November 2026. Learners never handle these substances; the activity uses paper cards and closed household labels only. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If safer substitutes exist for some workshop chemicals, why might a workshop still use the more hazardous one?”
- Later: the homework, then the practice test.
Watch out for
- Thinking used oil is harmless because it is 'only oil'. Used oil carries contaminants. HSE warns of dermatitis from frequent, prolonged contact.
- Thinking all brake dust is safe now. Older vehicles may still have asbestos linings, so dust is treated with care.
- Thinking PPE is the first answer. Prevent exposure at source first; PPE is the last line of defense.
Hands-on: Make a hazard card for each of four substances – used oil, brake dust, coolant, battery acid. On each, draw the hazard symbol you would expect on its container (look at labels on household products for ideas, without opening them), write how it enters the body and one control from high up HSE's list. Keep all real products closed and out of reach.
What you will learn
- I can describe the health hazards of used oil, brake dust, coolant and battery acid.
- I can name the routes by which substances enter the body.
- I can explain HSE's order for controlling hazardous substances.
- I can explain why older brake linings and two-pack paints need special care.
- I can explain why learners never handle these substances.
Key words
- hazardous substance
- A chemical, dust or fume that can harm health if it is breathed in, swallowed, or gets on skin or in eyes.
- dermatitis
- Inflammation of the skin – red, itchy, cracked skin – which can be caused by repeated contact with oils and solvents.
- asbestos
- A mineral fiber once used in brake and clutch linings. Breathing in its dust can cause serious lung disease.
- electrolyte
- The liquid inside a battery. In a lead-acid battery it contains sulfuric acid.
- Workplace Exposure Limit
- A legal maximum concentration of a substance in the air that workers breathe, averaged over a set time.
The big ideas
A repair shop is full of substances that can harm health: used engine oil, brake dust, coolant, battery acid, solvents and paints. British safety guidance from HSE highlights several: frequent, prolonged skin contact with used engine oil can cause dermatitis; brake and clutch linings on older cars may contain asbestos; isocyanate (two-pack) paint spraying can cause occupational asthma and needs air-fed breathing protection; and batteries bring gases, acid and short circuits.
The widely used approach is to prevent exposure at source first – by avoiding a substance or using a safer one – and only then to control exposure with good practice and, last of all, PPE. In the US, OSHA requires employers to provide a workplace free of recognized hazards and the training workers need.
This lesson explains the hazards and the thinking behind the controls. Learners never handle these substances; in a real shop they are handled only by trained workers.
Read-through: the teaching steps
How substances get into the body
There are four main routes:
- breathing in – dusts, mists, fumes and vapors;
- skin contact – oils and solvents, which can also pass through skin;
- swallowing – from dirty hands when eating;
- eyes – splashes of acid or coolant.
Controls aim to block each route.
Used oil and solvents
Used engine oil contains products of combustion and wear. HSE says frequent, prolonged skin contact can cause dermatitis and other skin disorders. Solvent cleaners strip the skin's natural oils and give off vapor. Controls include using less harmful cleaners, good washing facilities and suitable gloves.
Brake and clutch dust
Friction materials wear into fine dust. HSE warns that linings on older cars may contain asbestos. Fine dust thrown into the air can be breathed deep into the lungs, so methods that make airborne dust – such as blowing it away with compressed air – are avoided. Brake work itself is for trained technicians only.
Coolant and battery acid
Coolant often contains glycol, which is poisonous and can taste sweet, so spills are a danger to children and animals.
A lead-acid battery holds sulfuric acid, which burns skin and eyes, and while charging it gives off hydrogen, which is explosive. HSE lists battery gases, acid and short circuits as workshop hazards.
Paints and isocyanates
Two-pack paints contain isocyanates. HSE says spraying them can cause occupational asthma and needs air-fed breathing protection. Once someone is sensitized, even tiny exposures can trigger an attack, which is why spraying is done in booths by trained painters.
Controlling exposure
The approach set out in British COSHH guidance is widely used:
- identify the tasks that involve hazardous substances;
- prevent exposure at source – avoid the substance, use a safer process, substitute a safer product or use a safer form;
- if exposure can't be prevented, control it – keep control measures in good working order and exposure below any exposure limit;
- for substances that cause cancer, asthma or genetic damage, reduce exposure to as low a level as possible.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.