▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Electric and hybrid vehicles in the workshop: awareness – Motor Vehicle Theory motor mechanics lesson

Lesson 10 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Learn what HSE says every workshop must know about electric and hybrid vehicles: the hazards, the four categories of work and competence, and the precautions trained staff take.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

This lesson is awareness of HSE guidance on electric and hybrid vehicles, dated November 2026. There is no practical work; the activity is a paper poster. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “As more vehicles become electric, how should workshops train every member of staff, not just technicians?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking only HV technicians need to know about high voltage. HSE says even valeting and sales need awareness, and general maintenance needs much greater competence.
  • Thinking switching off makes the vehicle safe. Residual voltage and turning wheels can still be dangerous.
  • Thinking towing an electric car is like towing any car. HSE says avoid towing unless confirmed safe, because turning wheels can make dangerous voltage.

Hands-on: Make a four-step 'ladder' poster on paper showing HSE's four categories of work, from awareness at the bottom to the most skilled work at the top. Beside each step, write one example job and the level of training it needs. Add a warning panel: orange cables – look, never touch.

What you will learn

  • I can state the voltages involved and what HSE counts as high voltage.
  • I can list the hazards HSE describes for electric and hybrid vehicles.
  • I can describe HSE's four categories of work and the competence each needs.
  • I can explain the reasons for precautions such as key control, isolation and towing restrictions.
  • I can explain why learners never work on high-voltage systems.

Key words

high voltage
In this sector HSE counts 60–1500 V DC as high voltage. Vehicles use up to 650 V DC.
isolation
Disconnecting the high-voltage battery from the rest of the system, done only by trained technicians.
lock off
Securing the isolation so nobody can reconnect the system while work is under way.
residual voltage
Voltage that remains in parts after switch-off.
competence
The training, knowledge and experience needed to do a task safely.

The big ideas

Electric and hybrid vehicles now come into every kind of shop, from detailing bays to body shops. British safety guidance from HSE says they currently use voltages up to 650 V DC, that contact with live parts above 110 V DC can be fatal even when dry, and that 60–1500 V DC is counted as high voltage in this sector. High-voltage cables are usually orange.

HSE describes four categories of work, each needing more competence: cleaning and sales; incident response and recovery; maintenance and repair excluding high-voltage systems; and work on high-voltage systems, which needs the highest competence and vehicle-specific training. In the US, ASE's L3 test covers light-duty hybrid and electric vehicles.

This lesson is awareness for understanding. Learners never work on, open or touch high-voltage parts.

Read-through: the teaching steps

  1. The two systems

    Every electric or hybrid vehicle has a low-voltage system (usually 12 V) for lights and controls, and a high-voltage system: traction battery, power electronics, motor and orange cables. See them in the drawing on the lesson page.

    Traction battery pack (under the floor)Electric traction motorPower electronicsCharge port
    The main parts of a battery electric car. High-voltage parts (usually with orange cables) are for trained technicians only.
  2. The hazards HSE lists

    • electric shock;
    • fire or explosion from stored energy;
    • residual voltage after switch-off;
    • unexpected movement, or voltage made by motor magnets when the wheels turn;
    • manual handling of heavy batteries;
    • gases or liquids from damaged batteries;
    • silent vehicles;
    • effects on pacemakers.
  3. Four categories of work

    HSE's categories, rising in competence:

    • valeting and sales – awareness of the hazards;
    • incident response and recovery – knowing how to make the vehicle safe to move;
    • maintenance and repair excluding high-voltage systems – much greater competence, because HV parts are close by;
    • work on high-voltage systems – the highest competence and vehicle-specific training.
  4. Precautions and why they exist

    HSE lists precautions for trained staff:

    • keep remote keys away – so the system cannot power up unexpectedly;
    • isolate, lock off and prove dead before HV work – so nothing is live;
    • recognize orange HV cables;
    • take care with pressure washing – water can get into HV parts;
    • avoid towing unless confirmed safe – turning wheels can make dangerous voltage;
    • live working only as a last resort.
  5. Damaged vehicles and training

    Damaged batteries can catch fire or release gases and liquids, so crashed electric vehicles are kept apart and handled by trained people. Technicians build competence through training; ASE's L3 test is the Light Duty Hybrid/Electric Vehicle Specialist test.

  6. The learner's rules

    • Never touch orange cables or open high-voltage parts.
    • Treat every electric or hybrid vehicle as able to move silently.
    • Watch only with a qualified person, with the vehicle parked and switched off.
    • Report any vehicle that is damaged, smoking or leaking at once.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Workshop safety lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.