▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Drum brakes: shoes, cylinders and adjusters – Motor Vehicle Theory motor mechanics lesson

Lesson 67 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how drum brakes work, why leading shoes brake harder than trailing shoes, why drums fade more than discs, and how adjusters keep the shoes close to the drum.

Time
45 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

This lesson explains drum brakes with force, torque and expansion calculations. It is theory only: drum brakes contain strong springs, older linings may contain asbestos, and all brake work is for trained technicians. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think almost all new cars use disc brakes at the front, but some still keep drums at the rear?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking both shoes brake equally. The leading shoe brakes harder because of the self-servo effect.
  • Thinking drum brakes adjust themselves like discs. They need an adjuster, usually automatic, to keep the shoes close.
  • Using the diameter instead of the radius in πr² or the torque formula. Halve the diameter first.

Hands-on: Stand a saucepan on its side and press a curved strip of card against the inside while a partner slowly turns the pan, first with the card tip pointing the way the pan turns, then pointing the other way. Feel which way the card is dragged in harder: that is the leading shoe effect. Draw and label a drum brake. If you look at a real car, do it only with a qualified adult, with the car parked, switched off and cold, and only look.

What you will learn

  • I can name the parts of a drum brake and say what each does.
  • I can explain the self-servo effect of leading and trailing shoes.
  • I can explain why drums are prone to fade and need adjusting.
  • I can calculate wheel cylinder force, shoe torque and drum expansion.

Key words

brake drum
A cast-iron drum that turns with the wheel; the shoes press on its inside.
brake shoe
A curved steel shoe with a friction lining.
wheel cylinder
A hydraulic cylinder with a piston at each end that pushes the shoes outwards.
leading shoe
A shoe that the turning drum tends to drag harder into contact (self-servo).
adjuster
A device that keeps the shoes close to the drum as the linings wear.

The big ideas

This is explanation for understanding, not a repair guide. Brakes are safety-critical, and drum brakes contain strong springs; only trained technicians work on them.

Drum brakes were the main type for most of motoring history. Two curved shoes sit inside a drum that turns with the wheel; a wheel cylinder pushes them outwards against it. Today they are found mainly on the rear wheels of some smaller vehicles, often also serving as the parking brake.

They are compact, cheap and can give strong braking for little effort, but they cool slowly and need adjusting. State inspections check brakes; Virginia's, for example, includes brake linings and drums.

Read-through: the teaching steps

  1. The parts

    • Back plate: fixed to the axle or hub carrier; carries everything except the drum.
    • Shoes: curved steel with bonded or riveted friction lining.
    • Wheel cylinder: hydraulic, with a piston at each end.
    • Return springs: pull the shoes back.
    • Adjuster: sets the shoe-to-drum gap.
    • Drum: turns with the wheel.
  2. How it brakes

    Fluid pressure pushes the wheel cylinder pistons apart. The shoe tips move outwards, pivoting on an anchor at the other end, and the linings rub on the inside of the drum. Force at each piston = pressure × piston area. Friction torque of a shoe ≈ μ × shoe force × drum radius.

  3. Leading and trailing shoes

    The shoe whose tip points toward the direction of drum rotation is the leading shoe. Friction from the drum drags it harder into contact: the self-servo effect. The trailing shoe is pushed away slightly, so it brakes less. Twin-leading-shoe brakes (two cylinders) and duo-servo designs (one shoe pushes the other) increase the effect for stronger braking.

  4. Heat and fade

    The drum is enclosed, so heat escapes slowly. As it heats, the drum grows in diameter (Δd = d × α × ΔT), so the shoes must travel further and the pedal can sink. Hot linings also grip less. This is why drums are used where braking loads are lower.

  5. Adjusters and the parking brake

    Disc brakes take up wear automatically; drums need an adjuster. Most modern drums use an automatic adjuster, such as a ratchet that clicks on as the shoes move further, or a star-wheel strut. A lever and cable inside the drum spread the shoes mechanically to make the parking brake (a later lesson).

  6. Faults and safety

    Faults include worn linings, oil or brake fluid contamination from a leaking seal, a drum worn out of round (felt as a pulsing pedal) and seized adjusters (long pedal travel or weak parking brake). Linings on older vehicles may contain asbestos. All drum brake work is done only by trained technicians.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minGraded by Classfern
Independent practice (three levels)13 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Brakes lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.