▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Coolant: antifreeze, boiling point and pressure caps – Motor Vehicle Theory motor mechanics lesson

Lesson 35 of 131 in the Motor Vehicle Theory course (ages 16+)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out what is in engine coolant, how antifreeze stops it freezing and boiling, why a pressure cap lets the engine run hotter, and how to work out mixture strengths.

Time
40 minutes + 10 min homework
Course
Motor Vehicle Theory (ages 16+)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (NHTSA and your own state’s rules) before relying on them.

How to use this lesson

This lesson explains how coolant and pressure caps work. Hot coolant is under pressure and can scald, and antifreeze is poisonous: work on the cooling system is for trained technicians, and antifreeze must be kept away from children and animals. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why might a manufacturer choose a coolant that lasts for many years, even though it costs more?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking antifreeze is only needed in winter. It also raises the boiling point and carries corrosion inhibitors, so coolant is used all year round.
  • Thinking you can tell which coolant to use from its color. Colors vary between makers and types. The manufacturer's specification decides the coolant type.
  • Thinking a stronger antifreeze mix always cools better. Water carries heat best. Too much antifreeze reduces how well the coolant carries heat; the manufacturer gives the right mix.

Hands-on: Kitchen science with an adult: put two small plastic cups of water in a freezer, one plain and one with a teaspoon of salt stirred in. Check them every 30 minutes and record which freezes first and how each looks. Salt, like antifreeze, lowers the freezing point (it is not used in cars because it corrodes metal). Never use or taste real antifreeze: it is poisonous. If you look at a real car, do it only with a qualified adult, with the car parked, switched off and completely cold, and only look at the expansion tank and its markings.

What you will learn

  • I can explain why plain water is not used on its own as engine coolant.
  • I can describe what antifreeze does to the freezing point and the boiling point of coolant.
  • I can explain how a pressure cap raises the boiling point and why it must never be removed hot.
  • I can calculate the concentration of a coolant mix and the absolute pressure in a sealed system.
  • I can explain why coolant must be handled and disposed of carefully.

Key words

coolant
The liquid that carries heat from the engine to the radiator: usually water mixed with antifreeze and corrosion inhibitors.
antifreeze
A concentrate, usually based on a glycol, that lowers the freezing point and raises the boiling point of water.
corrosion inhibitor
A chemical in coolant that protects the metals in the engine and radiator from corrosion.
pressure cap
A cap with a spring-loaded valve that holds the cooling system above atmospheric pressure when hot, and lets coolant back in as it cools.
concentration
The fraction of the coolant mix that is antifreeze, usually given as a percentage by volume.

The big ideas

Water is very good at carrying heat, but on its own it has three problems in an engine: it freezes in cold weather, it boils at a temperature an engine can easily reach, and it corrodes metals such as iron and aluminum. Freezing is especially dangerous, because water expands when it turns to ice and can crack a radiator or even a cylinder block.

So engines use coolant: water mixed with an antifreeze concentrate. The antifreeze lowers the freezing point and raises the boiling point, and it carries corrosion inhibitors. A sealed pressure cap raises the boiling point further, so the engine can run hot without the coolant boiling.

The vehicle manufacturer states which type of coolant to use and what mix strength; the handbook gives the details. This lesson explains the science. It is not a repair guide: hot coolant is under pressure and can scald, and antifreeze is poisonous.

Read-through: the teaching steps

  1. Why not just water?

    Water has a high specific heat capacity, so it carries a lot of heat for each degree it warms. That is why it is the main part of coolant.

    But water:

    • freezes and expands, which can split metal parts;
    • boils at a temperature that a working engine can reach, especially in hot spots around the combustion chambers;
    • corrodes iron and aluminum and can leave scale.

    Antifreeze and inhibitors solve these problems.

  2. How antifreeze works

    Most antifreeze is based on a glycol, most often ethylene glycol. Dissolving it in water does two useful things:

    • It lowers the freezing point, so the mix stays liquid in cold weather. As it gets very cold it turns slushy rather than freezing solid.
    • It raises the boiling point a little.

    The strength of protection depends on the concentration. A common recommendation is roughly half antifreeze and half water, but the manufacturer's data gives the right mix for each vehicle. More antifreeze is not always better: a mix that is too strong carries heat less well.

  3. Inhibitors and coolant types

    Antifreeze also carries corrosion inhibitors, which protect the different metals in the system, including aluminum heads and radiators. Inhibitors are used up slowly over time, which is one reason coolant is changed at intervals the manufacturer sets.

    There are different inhibitor technologies, and they are not all designed to be mixed. Color is not a reliable guide to type. That is why technicians use the coolant that the vehicle manufacturer specifies.

  4. Pressure raises the boiling point

    The temperature at which a liquid boils depends on the pressure above it. At normal atmospheric pressure (about 100 kPa) pure water boils at 212 °F. At higher pressure it must be hotter before it can boil: at about 200 kPa absolute, water boils at about 248 °F.

    A cooling system is sealed. As the coolant warms and expands, the pressure rises until the spring-loaded valve in the pressure cap lets some coolant into the expansion tank. So the system runs at a set pressure above atmospheric, and the coolant can be hotter than 212 °F without boiling.

  5. The pressure cap's two valves

    A pressure cap has two valves:

    • a pressure valve that opens when the system pressure goes above the cap's rating, letting coolant out to the expansion tank;
    • a vacuum valve that opens as the system cools and the coolant contracts, letting coolant back in so the hoses do not collapse.

    The cap's rating is a gauge pressure. Add atmospheric pressure to find the absolute pressure. A cap that no longer seals lets the pressure fall, so the coolant can boil at a lower temperature and the engine may overheat.

  6. The danger of opening a hot system

    If a cap is removed while the coolant is above its normal boiling point, the pressure drops suddenly. The coolant can then boil instantly and erupt as a spray of scalding liquid and steam.

    This is why handbooks say to check coolant only when the engine is cold, and why work on the cooling system is for trained technicians. Antifreeze is also poisonous if swallowed and can taste sweet, so it must be kept away from children and animals. In the UK, waste antifreeze is classed as hazardous waste if it contains hazardous substances, so workshops dispose of it through proper routes.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Cooling and lubrication lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department

About this lesson

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.