Springs and shock absorbers – Garage Basics motor mechanics lesson
Lesson 32 of 70 in the Garage Basics course (ages 11–16)
US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version
Find out how springs soak up bumps, why shock absorbers stop a car bouncing, and use Hooke's law to work out how far a spring squashes.
- Time
- 45 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
The rubber band activity is safe; please do not let your child handle real suspension springs, which can store dangerous amounts of energy. A calculator helps with the sums. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think racing cars have much stiffer springs than family cars?”
- Later: the homework, then the practice test.
Watch out for
- Thinking shock absorbers hold the car up. The springs hold the car up. Shock absorbers only control how the springs move.
- Thinking a stiffer spring squashes more. A stiffer spring has a higher spring rate, so it squashes less for the same load.
- Forgetting to share the axle load between two springs. Each axle has two springs, one at each side, so each carries half the axle load.
Hands-on: Hang a small bag from a rubber band or a soft toy spring and add coins one at a time, measuring the stretch with a ruler each time. Plot a graph of coins against stretch. Then bounce the bag gently and count how many bounces it makes in air, and again with the bag lowered into a jug of water. The water acts like a shock absorber.
What your child will learn
- I can explain the different jobs of springs and shock absorbers.
- I can use Hooke's law: force = spring rate × compression.
- I can work out the load on each spring from the car's mass and weight distribution.
- I can explain what happens to a car with worn shock absorbers.
- I can explain why springs are dangerous to work on without training.
Key words
- suspension
- The springs, shock absorbers, arms and joints that connect the wheels to the body and let the wheels move over bumps.
- spring rate
- How stiff a spring is: the force needed to squash it by 1 mm, in newtons per millimeter (N/mm).
- shock absorber
- A tube with oil and a piston that slows down the bouncing of the spring, turning the movement energy into heat. In the UK it is usually called a damper.
- Hooke's law
- For a spring, force = spring rate × compression, as long as the spring is not overloaded.
- oscillation
- Moving up and down again and again, like a bouncing ball or a weight on a spring.
The big ideas
Roads are never perfectly smooth. Without suspension, every bump would shake the car, its passengers and its load, and the tires would bounce off the road and lose grip. The suspension lets each wheel move up and down while the body stays steady.
Two parts share the job. The springs (usually steel coil springs) hold the car up and squash to absorb the energy of a bump. But a spring on its own keeps bouncing. Shock absorbers stop that bouncing. A shock absorber is an oil-filled tube with a piston; as the wheel moves, oil is forced through small holes in the piston, which resists the movement and turns the energy into heat. The result is a car that goes over a bump, settles once, and carries on.
Springs store a great deal of energy, especially when squashed. Removing or fitting them needs special tools and training, so it is work for a qualified technician only. State safety inspections such as Virginia's include steering and suspension.
Read-through: the teaching steps
Springs and shock absorbers have different jobs
- Springs hold the car up and absorb the energy of bumps.
- Shock absorbers control the springs so they do not keep bouncing.
In many cars the coil spring sits around the shock absorber in one unit called a strut.
The main parts you can find on almost every car. Hooke's law
A spring squashes in proportion to the force on it:
force (N) = spring rate (N/mm) × compression (mm)
A spring with a rate of 25 N/mm carrying 3,000 N squashes by 3,000 ÷ 25 = 120 mm.
Load on each spring
Find the mass on each axle from the weight distribution, then halve it for each side. Weight force = mass × 9.8.
A 1,200 kg car with 60% on the front has 720 kg on the front axle, 360 kg on each front spring, and 360 × 9.8 = 3,528 N on each.
How a shock absorber works
Inside the shock absorber, a piston on a rod moves through oil. The oil can only pass through small holes and valves in the piston. That makes it hard to move the piston quickly, but easy to move it slowly. The faster the wheel moves, the more the shock absorber resists, and the energy becomes heat in the oil.
Worn shock absorbers
As shock absorbers wear, oil leaks or the valves wear, and the springs bounce more freely. The car floats and wallows over bumps, the tires bounce and lose grip, braking distances can grow, and tires can wear unevenly. A technician checks shock absorbers for leaks and for how well they control movement.
Stored energy: a safety warning
A squashed coil spring stores a lot of energy. If it is released suddenly it can fly out with enough force to cause serious injury. That is why spring work needs special compressor tools, training and a qualified technician. Some cars use air suspension instead of steel springs; HSE warns that nobody should work under an air-suspended vehicle unless it is propped.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.