▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Fuses and relays: protecting circuits – Garage Basics motor mechanics lesson

Lesson 40 of 70 in the Garage Basics course (ages 11–16)

US version. US spelling and words (tire, gasoline, hood) and US rules such as state inspections. · UK version

Find out how a fuse protects wiring from overheating, how a relay lets a small switch control a big current, and how to work out the right fuse rating.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Graded
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training program or a certification, and nothing here replaces an accredited automotive program, ASE certification or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

This activity is reading only; please keep the car's fuse box closed. If a fuse in your car blows repeatedly, it points to a fault that a technician should find. Every answer is graded straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think it is better for a fuse to blow than for it to be made extra strong?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking a fuse protects the device, like a lamp or radio. Car fuses mainly protect the wiring from overheating and catching fire.
  • Thinking a bigger fuse is a fix if a fuse keeps blowing. A fuse that keeps blowing shows a fault. A bigger fuse could let the wiring burn.
  • Thinking a relay makes extra current. A relay is just a switch worked by a magnet. The load current still comes from the battery or alternator.

Hands-on: With an adult, look in the vehicle handbook (or a handbook found online) for the fuse box diagram. Make a table of five circuits, their fuse ratings, and a guess at each circuit's power using power = 12 V × current. Do not open or touch a real fuse box. At school, your teacher may show a fuse wire melting in a safe demonstration.

What your child will learn

  • I can explain what a fuse does and why it is needed.
  • I can calculate the normal current in a circuit and choose a suitable fuse rating.
  • I can explain why a fuse must never be replaced with a higher rating.
  • I can explain how a relay works and why cars use them.

Key words

fuse
A thin strip of metal that melts and breaks the circuit if the current is too high, protecting the wiring from overheating.
fuse rating
The current in amps that a fuse can carry without blowing.
relay
An electrically worked switch: a small current through a coil makes a magnet that closes contacts carrying a larger current.
fuse box
The panel where a car's fuses and relays are grouped together.
overload
More current flowing than a circuit was designed for, for example because of a short circuit.

The big ideas

Every wire has resistance, so current heats it. A wire sized for 10 A stays cool at 10 A, but if a fault makes 50 A flow, it can melt its insulation and start a fire. A fuse prevents this. It is a deliberately weak link: a thin metal strip that melts at a set current and breaks the circuit before the wiring gets dangerously hot.

Cars have dozens of fuses, usually in one or two fuse boxes, each protecting one or more circuits. Each fuse has a rating in amps, chosen to be a little above the normal current of its circuit. A blown fuse is a symptom: something made too much current flow. It should only ever be replaced with one of the same rating, as shown in the vehicle handbook, and if it blows again, a technician should find the fault. A higher-rated fuse would let the wiring overheat.

Relays solve a different problem. Big loads, such as headlights, the cooling fan or the heated rear window, take large currents. Rather than running thick cables to the dashboard switch, the switch sends a small current to a relay near the load. The relay's coil becomes an electromagnet and pulls heavy contacts closed, switching the big current. A small current controls a large one.

Read-through: the teaching steps

  1. Why wires need protecting

    Current flowing through a wire's resistance makes heat. Too much current makes too much heat. A short circuit, where a bare wire touches the metal body, can make a huge current flow because the resistance is almost zero.

    +12 VBatteryFuseSwitchLampReturn through the body (ground)
    A simple lighting circuit. On a car the metal body is the return path (ground).
  2. How a fuse works

    The fuse is in series with the circuit, so all the current passes through it. Its metal strip is thinner than the wire. If the current goes above the rating for long enough, the strip melts and the circuit is broken. Fuses are color-coded by rating so the right one is easy to identify.

  3. Choosing a rating

    First find the normal current: current = power ÷ voltage. Then choose the next standard fuse rating a little above it, so the fuse does not blow in normal use but still protects the wire.

    Two 60 W headlamps on 12 V take 120 ÷ 12 = 10 A, so a 15 A fuse might be used.

  4. Never fit a bigger fuse

    A fuse with a higher rating than the circuit needs will not blow when it should. The wiring could overheat and burn before the fuse breaks. That is why the handbook lists the correct rating for every fuse.

  5. How a relay works

    A relay has two separate circuits. A small control current flows through a coil, making it an electromagnet. The magnet pulls a metal arm, closing contacts in the second circuit, which carries the large load current. When the control current stops, a spring opens the contacts again.

  6. Why cars use relays

    • Dashboard switches can be small and light.
    • Thick cables can stay short, near the battery and the load.
    • Control units can switch heavy loads using tiny currents.

    The starter solenoid is a kind of heavy-duty relay.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Electricity in the car lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by ASE, NHTSA, any state agency, any college, testing agency or exam board.