Weight shift and loading changes: the formula – Private Pilot Theory aviation lesson
Lesson 178 of 228 in the Private Pilot Theory course (ages 16+)
US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version
Use the handbook formulas to find how far the CG moves when a mass is shifted, added or removed – and how much to move to bring the CG back inside limits.
- Time
- 45 minutes + 10 min homework
- Course
- Private Pilot Theory (ages 16+)
- You need
- Paper, a pencil and this page
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test. Rules and values on this page are given as of November 2026. Always check the current official source (the FAA) before relying on them.
How to use this lesson
This is adult-level theory (16+). Read it alongside the official handbooks; it is explanation for understanding, not training. Every answer is graded straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why is the weight-shift formula quicker than redoing the whole loading table?”
- Later: the homework, then the practice test.
Watch out for
- Using the old total mass when a mass is added. For added or removed mass, divide by the new total.
- Using the distance from the datum instead of from the old CG. For an added mass, use its distance from the old CG.
- Getting the direction wrong. Removing mass aft of the CG moves the CG forward.
Hands-on: On a ruler balanced on a pencil, place five identical coins. Move one coin 10 cm and measure how far the balance point moves. Check: 1 coin × 10 cm ÷ 5 coins = 2 cm.
What you will learn
- I can state the weight-shift formula.
- I can calculate the CG change when a mass is moved.
- I can calculate the CG change when a mass is added or removed.
- I can find how much mass must be moved to shift the CG a set distance.
- I can say which way the CG moves.
Key words
- weight shift
- Moving a mass within the aircraft without changing the total mass.
- CG change (ΔCG)
- The distance the CG moves.
- distance shifted
- How far the mass is moved.
- added/removed mass formula
- ΔCG = mass × distance from old CG ÷ new total mass.
- ratio form
- mass shifted ÷ total mass = ΔCG ÷ distance shifted.
The big ideas
The PHAK (chapter 10) gives two quick formulas. When a mass is moved inside the aircraft, the total mass stays the same and: mass shifted ÷ total mass = change in CG ÷ distance shifted. The handbook's example: 100 lb moved from station 30 to station 150 in an 8,000 lb aircraft adds 12,000 in-lb, so the CG moves 1.5 in aft, from 77 to 78.5 in.
When a mass is added or removed: change in CG = mass × distance from the old CG ÷ new total mass. The handbook's examples: adding 140 lb at station 150 to a 6,860 lb aircraft with CG 80 moves the CG 1.4 in aft (to 81.4); removing 100 lb at station 150 from 6,100 lb with CG 80 moves it about 1.2 in forward (to 78.8).
The direction is common sense: moving mass aft moves the CG aft; adding mass aft of the CG moves it aft; removing mass aft of the CG moves it forward. This lesson is for understanding only.
Read-through: the teaching steps
Shifting a mass
Total mass unchanged.
ΔCG = mass shifted × distance shifted ÷ total mass
The handbook example
100 lb moved 120 in (station 30 → 150) in an 8,000 lb aircraft:
ΔCG = 100 × 120 ÷ 8,000 = 1.5 in aft (77 → 78.5 in).
Adding or removing a mass
ΔCG = mass added or removed × distance from the old CG ÷ new total mass.
Use the new total: add the mass, or subtract it if removed.
Handbook add/remove examples
- Add 140 lb at station 150 to 6,860 lb with CG 80: distance 70, new total 7,000. ΔCG = 140 × 70 ÷ 7,000 = 1.4 in aft → 81.4 in.
- Remove 100 lb at station 150 from 6,100 lb with CG 80: new total 6,000. ΔCG = 100 × 70 ÷ 6,000 = 1.17 in forward → about 78.8 in.
How much to move?
Rearrange: mass to shift = total mass × ΔCG wanted ÷ distance available.
Direction check
- Move mass aft → CG aft.
- Add mass aft of CG → CG aft; add forward of CG → CG forward.
- Remove mass aft of CG → CG forward.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 14 min | Not assessed, self-checked |
| Worked examples and guided practice | 9 min | Graded by Classfern |
| Independent practice (three levels) | 13 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Flight Performance and Planning lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.