▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Math, Cookery, Programming and Art are open – explore →

Maneuvering loads: g and structural limits – Private Pilot Theory aviation lesson

Lesson 145 of 228 in the Private Pilot Theory course (ages 16+)

US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version

Steep turns and sharp pull-ups make an airplane feel heavier. Learn what load factor (g) is, how bank angle changes it, and what limits the structure is designed for.

Time
40 minutes + 10 min homework
Course
Private Pilot Theory (ages 16+)
You need
Paper, a pencil and this page
Graded
Instantly, with explanations

Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test. Rules and values on this page are given as of November 2026. Always check the current official source (the FAA) before relying on them.

How to use this lesson

This is adult-level theory (16+). It is explanation for understanding, not training. Every answer is graded straight away with a worked explanation.

  1. Read what you will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do aerobatic airplanes need a stronger structure than normal-category airplanes?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking load factor rises steadily with bank. It rises slowly at first and very fast past about 45–50°.
  • Forgetting negative limits. Limits are smaller in negative g.
  • Thinking stall speed is fixed. It rises with the square root of load factor.

Hands-on: Swing a small bag on a string in a circle, gently. Feel the pull on your hand grow as you swing it faster – a bigger 'load factor' on the string.

What you will learn

  • I can define load factor.
  • I can work out load factor in a level turn from the bank angle.
  • I can give the limit load factors for normal, utility and acrobatic categories.
  • I can explain how load factor raises the stall speed.

Key words

load factor
Lift divided by weight, measured in g.
g
A unit of load factor; 1 g is normal straight and level flight.
limit load factor
The greatest load factor the structure is designed to take in service.
category
A design class (normal, utility, acrobatic) with its own limits.

The big ideas

Load factor is the total lift divided by the weight, measured in 'g'. In straight and level flight it is 1 g. In a level turn the wing must make extra lift, because the lift is tilted and only its vertical part holds the weight. The FAA Pilot's Handbook (chapter 5) gives examples: in a coordinated level turn at 60° of bank the load factor is 2 g, and at 80° of bank it is 5.76 g. The load factor rises very fast beyond about 45–50° of bank. In math terms, load factor in a level turn = 1 ÷ cos(bank angle).

The structure is designed for limit load factors. The handbook lists: normal category 3.8 g to −1.52 g; utility 4.4 g to −1.76 g; acrobatic 6.0 g to −3.0 g, with a 50 % safety factor added in design.

Load factor also raises the stall speed in proportion to its square root – the UK Skyway Code notes that at 2 g stall speed rises by 41 %. Maneuvering speed (Va) is the speed below which a single full control movement should not overstress the airplane. This is explained for understanding only.

Read-through: the teaching steps

  1. What is g?

    Load factor = lift ÷ weight. 1 g in level flight; more in turns and pull-ups.

  2. Turns

    Level turn: load factor = 1 ÷ cos(bank). 60° → 2 g. 80° → 5.76 g. It climbs steeply past 45–50°.

  3. Limit load factors

    Normal 3.8 / −1.52 g. Utility 4.4 / −1.76 g. Acrobatic 6.0 / −3.0 g.

  4. Stall speed

    Stall speed × √(load factor). At 2 g, × 1.41 (41 % higher).

  5. Maneuvering speed

    Below Va, one full control movement in one axis should not cause structural damage.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minGraded by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minGraded by Classfern
Independent practice (three levels)11 minGraded by Classfern
Exit ticket and talk question5 minGraded by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all graded instantly.

More practice

More Principles of Flight lessons · Private Pilot Theory course · All aviation practice tests · Aviation Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.