Icing basics – Ground School Basics aviation lesson
Lesson 43 of 90 in the Ground School Basics course (ages 11–16)
US version. US spelling and units (inHg, statute miles, US gallons) and the FAA. · UK version
Discover how ice builds up on aircraft from supercooled water, why it is dangerous, how anti-ice and de-ice systems work, and why carburetor ice can form even on a warm day.
- Time
- 40 minutes + 10 min homework
- Course
- Ground School Basics (ages 11–16)
- You need
- Paper, a pencil and this page
- Graded
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an FAA-approved school, and nothing here counts towards a pilot certificate or replaces training with a certificated instructor and the FAA knowledge test.
For parents: how to use this lesson
The supercooled water trick does not always work first time – that unpredictability is part of the science. Never put glass bottles in the freezer. Every answer is graded straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think most small training aircraft are not designed to fly in icing conditions, while airliners are?”
- Later: the homework, then the practice test.
Watch out for
- Thinking water always freezes at 0 °C. Small cloud droplets can stay liquid well below 0 °C – that is supercooled water.
- Thinking carburetor ice only happens in freezing weather. It is most likely below about 21 °C in humid air and possible up to about 38 °C.
- Thinking de-icing and anti-icing are the same. Anti-icing prevents ice; de-icing removes ice that has formed.
Hands-on: With an adult, put a bottle of pure water in the freezer for about two hours (check it stays liquid). Take it out gently and tap it or pour it onto an ice cube – it can freeze suddenly. That is supercooled water in action.
What your child will learn
- I can explain what supercooled water is and why it causes airframe icing.
- I can state the temperature range where airframe icing is usually worst.
- I can explain the difference between anti-icing and de-icing.
- I can explain why carburetor icing can happen in warm, humid air.
Key words
- supercooled water
- Liquid water droplets below 0 °C that freeze when they hit something.
- airframe icing
- Ice building up on the wings, tail, propeller and other parts of the aircraft.
- anti-icing
- Stopping ice from forming in the first place.
- de-icing
- Removing ice after it has formed.
- carburetor icing
- Ice forming inside a piston engine's carburetor as fuel evaporates and the air cools.
The big ideas
Clouds can contain water droplets that stay liquid below 0 °C – supercooled water. When they hit an aircraft they freeze. The FAA's Pilot's Handbook of Aeronautical Knowledge says supercooled water freezes on impact, that icing is rapid in clear ice between 0 and −15 °C, and that visible moisture at 0 °C or below can cause airframe ice.
Ice changes the shape of the wing, so it can reduce lift and increase drag. The handbook explains the difference between anti-icing (stopping ice forming) and de-icing (removing it after it forms). Systems include inflatable rubber boots on leading edges, hot air from turbine engines, heated panels, and "weeping wings" that ooze antifreeze. But the handbook also notes that most light aircraft have only a heated pitot tube and are not certified for flight in icing.
Ice can also form inside a piston engine's carburetor. Fuel evaporating and air speeding through the venturi can cool the carburetor by 60–70 °F. So carburetor icing is most likely below about 70 °F (21 °C) with humidity over 80 %, and can happen up to about 100 °F (38 °C) with humidity as low as 50 %. Carburetor heat melts it but can reduce power by up to 15 %.
Read-through: the teaching steps
Supercooled water
Water droplets in clouds can stay liquid below freezing. They are unstable: when they strike a cold aircraft surface they freeze on the spot.
When icing is worst
Visible moisture (cloud, rain, drizzle) at 0 °C or below can cause ice. The worst airframe icing is typically between 0 and −15 °C.
Why ice is dangerous
Ice spoils the smooth shape of the wing and tail, and can block sensors such as the pitot tube. That can mean less lift, more drag and wrong instrument readings.
Anti-ice and de-ice
- Anti-icing prevents ice forming (heated pitot tubes, hot air, heated panels, antifreeze "weeping" wings)
- De-icing removes ice after it forms (inflatable rubber boots that crack it off)
Most light aircraft have only a heated pitot and are not certified for icing conditions.
Carburetor icing
Inside a carburetor, fuel evaporates and the air speeds up and cools – by 60–70 °F. Ice can form even on a warm day:
- most likely below about 70 °F (21 °C) with humidity over 80 %
- possible up to about 100 °F (38 °C) with humidity as low as 50 %
Carburetor heat sends warm air in to melt it, but can reduce power by up to 15 %.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Graded by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Graded by Classfern |
| Independent practice (three levels) | 11 min | Graded by Classfern |
| Exit ticket and talk question | 5 min | Graded by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all graded instantly.
More practice
More Weather and atmosphere lessons · Ground School Basics course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the FAA, any flying school, testing agency or exam board.