▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Springs and bumps: what suspension does – Young Mechanics motor mechanics lesson

Lesson 16 of 40 in the Young Mechanics course (ages 8–11)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how springs and dampers soak up the bumps in the road, keep the tyres pressed onto the ground and give a smooth, safe ride.

Time
35 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A pen spring and a ruler show the ideas safely. Real car springs are under great force and must only be handled by trained mechanics. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “What do you think it would be like to ride in a car with no suspension on a bumpy country road?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking suspension is only there to make the ride comfortable. It also keeps the tyres on the road so the car can steer and brake.
  • Thinking springs and dampers do the same job. Springs soak up the bump. Dampers stop the spring bouncing afterwards.
  • Thinking a stiffer car is always safer. Too stiff and the wheels can skip over bumps. The suspension is designed to balance comfort and grip.

Hands-on: Find a spring from an old click pen (ask an adult first). Press it gently on a table and let go – it springs back. Then hold a ruler flat on the edge of a table with one end sticking out, flick the end and watch it wobble. Now flick it again while lightly touching it with a finger – the wobble stops quickly. Your finger is acting like a damper (shock absorber).

What your child will learn

  • I can explain what a car's suspension is for.
  • I can say what the springs do and what the dampers do.
  • I can explain why suspension helps the tyres grip the road.
  • I can say why suspension springs are only ever handled by trained mechanics.

Key words

suspension
The springs and other parts that join the wheels to the car body and soak up bumps.
spring
A coil of strong metal that squashes when pushed and springs back.
damper
A part that slows the bouncing of a spring, so the car does not keep bobbing up and down. Also called a shock absorber.
bump
A rise or dip in the road surface.
grip
How well the tyres hold onto the road.

The big ideas

Roads are never perfectly smooth. There are bumps, dips, potholes and drain covers. If a car's wheels were bolted straight onto its body, every bump would bang through the whole car, the people inside would be shaken about, and the wheels might bounce off the ground.

The suspension stops this. Each wheel is joined to the car through a strong spring. When the wheel hits a bump, the spring squashes and lets the wheel move up while the body stays steadier. But a spring on its own would keep bouncing, like a pogo stick. So each spring works with a damper (also called a shock absorber), which slows the bounce and lets the car settle quickly.

Suspension is not only about comfort. It keeps the tyres pressed onto the road, so they can grip for steering and braking. That is why suspension parts are checked in the MOT test, and why only trained mechanics work on them.

Read-through: the teaching steps

  1. Why cars need suspension

    Without suspension, every bump would shake the car and its passengers. Worse, the wheels could bounce off the road for a moment, and a wheel in the air cannot steer or brake.

  2. Springs

    Most cars have a coil spring near each wheel. When the wheel goes over a bump, the spring squashes. When the bump has passed, the spring pushes the wheel back down onto the road. The body of the car moves much less than the wheel.

  3. Dampers

    A spring on its own keeps bouncing up and down after a bump. A damper is a tube filled with oil and a piston. The oil can only squeeze slowly through small holes, which slows the spring down so the bouncing stops quickly.

  4. Keeping the tyres on the road

    Good suspension keeps all four tyres pressed onto the road, even on a bumpy surface. That keeps the grip the car needs for steering and braking, so suspension is a safety part, not just a comfort part.

  5. Arms and joints

    The wheels are held in place by metal arms with joints and rubber bushes, so they can move up and down but not wobble about. In the UK, the MOT test checks springs, shock absorbers, arms and joints.

  6. Springs store huge energy

    A car spring is squashed by the weight of the car, so it holds a lot of stored energy. If it were released suddenly it could fly out with great force. That is why only trained mechanics with special tools ever work on suspension springs.

The lesson, step by step

35 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task11 minNot assessed, self-checked
Worked examples and guided practice7 minMarked by Classfern
Independent practice (three levels)8 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.