How brakes stop a car: friction – Young Mechanics motor mechanics lesson
Lesson 14 of 40 in the Young Mechanics course (ages 8–11)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Discover how pressing a pedal squeezes pads against a spinning disc, and how friction turns a moving car's energy into heat to bring it to a stop.
- Time
- 40 minutes + 10 min homework
- Course
- Young Mechanics (ages 8–11)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
A bicycle shows brakes working safely and clearly. Please hold it still and keep fingers away from moving wheels and brake parts. Car brakes are for trained mechanics only. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why do you think the brake lights at the back of a car are bright red?”
- Later: the homework, then the practice test.
Watch out for
- Thinking brakes stop the car by grabbing the road. Brakes slow the wheels. The tyres then grip the road to slow the car.
- Thinking the energy of the car just disappears. Energy changes form. In braking it becomes heat in the discs and pads.
- Thinking brake pads last for ever. Every stop wears them a little. Mechanics check and replace them.
Hands-on: Rub a rubber (eraser) hard and fast on a piece of paper for ten seconds, then touch the rubber gently – it is warm. That is friction turning movement into heat, just like brakes. With an adult, look at a bicycle: while the adult holds the bike still and squeezes the brake lever, watch the brake blocks move in to grip the wheel. Look only – keep fingers away from the wheel and brakes.
What your child will learn
- I can explain that brakes use friction to slow the wheels down.
- I can name the brake pedal, brake fluid, calliper, pads and disc.
- I can explain where the energy of a moving car goes when it brakes.
- I can say why brakes are checked by trained mechanics only.
Key words
- friction
- The rubbing force between two surfaces that slows movement and makes heat.
- brake disc
- A metal plate that spins with the wheel. The pads squeeze it to slow the wheel.
- brake pads
- Blocks of tough material that press on the disc and wear down slowly.
- calliper
- The part that clamps the brake pads onto the disc, like fingers pinching.
- brake fluid
- A special liquid in pipes that carries the push from the pedal to the brakes.
- handbrake
- A brake that holds the car still when it is parked.
The big ideas
A moving car has a lot of movement energy. To stop it, that energy has to go somewhere. Brakes turn it into heat, using friction – the same rubbing force that warms your hands when you rub them together.
When the driver presses the brake pedal, a special liquid called brake fluid carries the push along pipes to each wheel. At each front wheel (and on many cars at the back too) there is a metal disc that spins with the wheel. A calliper squeezes brake pads against both sides of the disc, like fingers pinching a spinning coin. The rubbing slows the disc, and the wheel and the car slow down with it.
All that energy becomes heat, so brakes can get very hot. The pads wear down slowly and are replaced by mechanics when they get thin. Brakes are one of the most important safety parts of a car, so only trained mechanics work on them. GOV.UK says drivers should check that their brakes work every time they drive.
Read-through: the teaching steps
Moving energy must go somewhere
A heavy car going fast has a lot of movement energy. Energy cannot just vanish – it changes into another form. Brakes change movement energy into heat.
From pedal to wheel
When the driver presses the brake pedal, it pushes on brake fluid in a sealed system of pipes. Liquids cannot be squashed, so the push travels along the pipes to all four wheels at once.
Disc and pads
Look at the drawing on the lesson page. The brake disc spins with the wheel. The calliper sits over the edge of the disc. When the fluid pushes, the calliper squeezes the brake pads onto both sides of the disc. Friction between pads and disc slows the wheel.
A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat. Brakes get hot
Because the energy turns into heat, brake discs can get hot enough to burn skin after hard braking. That is one reason nobody touches the wheels of a car that has just been driven.
Brake lights and the handbrake
- Brake lights – when the pedal is pressed, red brake lights come on at the back to warn drivers behind
- Handbrake – holds the car still when it is parked, so it cannot roll away
Wear and safety
Every stop rubs a tiny bit off the pads, so they get thinner over time. Mechanics check them and fit new ones when needed. Brakes are safety-critical, so brake work is done only by trained mechanics. Brake dust is not breathed in, and the linings on some old cars may contain asbestos, which is harmful – another reason the job is left to professionals.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Wheels, brakes and steering lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.