▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

A simple circuit: battery, switch and bulb – Young Mechanics motor mechanics lesson

Lesson 21 of 40 in the Young Mechanics course (ages 8–11)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Build up a simple circuit in your head – battery, wires, switch and bulb – and see how the same idea lights a car's headlights and brake lights.

Time
40 minutes + 10 min homework
Course
Young Mechanics (ages 8–11)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Only use small 1.5-volt cells and a proper kit for circuit experiments. Car batteries, mains sockets and anything plugged into the wall are never used. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think a car has many separate fuses instead of just one big one?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking electricity only needs one wire from the battery to the bulb. Electricity needs a complete loop, out and back again.
  • Thinking a switch makes electricity. A switch only opens or closes a gap. The battery provides the electricity.
  • Thinking a blown fuse is the problem itself. A fuse blowing is a sign of a fault. It did its job by breaking the circuit; the fault is found by a trained person.

Hands-on: With a teacher or adult and a school circuit kit (a 1.5-volt cell, a small bulb in a holder, two or three wires and a switch), build a simple circuit and turn the bulb on and off with the switch. Then make a gap in the circuit and test things across it: a coin, a plastic spoon, a key, a rubber, a piece of foil. Sort them into conductors and insulators. Never use a car battery or a mains socket.

What your child will learn

  • I can say that electricity needs a complete loop, called a circuit, to flow.
  • I can explain what a switch does in a circuit.
  • I can sort materials into conductors and insulators.
  • I can explain how a car uses its metal body as part of the circuit (the earth) and why it has fuses.

Key words

circuit
A complete loop that electricity can flow all the way round.
switch
A part that opens or closes a gap in a circuit to turn something off or on.
conductor
A material that lets electricity flow through it easily, such as copper or steel.
insulator
A material that does not let electricity flow, such as plastic or rubber.
fuse
A safety part with a thin wire that melts and breaks the circuit if too much electricity flows.
earth
The return path back to the battery. In a car, the metal body is used as the earth.

The big ideas

Electricity only flows when it has a complete loop to travel round. This loop is called a circuit. In the simplest circuit, a wire goes from one end of a battery to a bulb, and another wire goes from the bulb back to the other end of the battery. Electricity flows round the loop and the bulb lights up.

If there is a gap anywhere in the loop, the electricity stops and the bulb goes out. A switch is simply a way of making or breaking that gap on purpose. Wires are made of metal, such as copper, because metals are good conductors. They are covered in plastic, an insulator, so the electricity stays inside.

A car's lights work in exactly the same way. The battery, switches, wires and bulbs make circuits. To save wire, the car's metal body is used as the return path to the battery – this is called the earth. Fuses protect each circuit, so that if something goes wrong, a fuse breaks the circuit before the wires get hot.

Read-through: the teaching steps

  1. A complete loop

    Look at the circuit in the drawing on the lesson page. Electricity leaves one terminal of the battery, flows through the wire to the bulb, through the bulb, and back along another wire to the other terminal. Because the loop is complete, the bulb lights.

    +12 VBatteryFuseSwitchLampReturn through the body (earth)
    A simple lighting circuit. On a car the metal body is the return path (earth).
  2. The switch

    A switch has two metal contacts. When it is on, the contacts touch and close the gap, so electricity flows. When it is off, they move apart and open a gap, so the flow stops. The light switch at home and the headlight switch in a car work the same way.

  3. Conductors and insulators

    • Conductors let electricity flow: copper, steel, aluminium and other metals
    • Insulators stop it: plastic, rubber, wood, glass

    Wires have a copper inside (conductor) and a plastic coat (insulator).

  4. The car body as the earth

    A car would need miles of wire if every light had two wires going back to the battery. Instead, one terminal of the battery is joined to the metal body. Each light has one wire from the switch, and the metal body carries the electricity back. This return path is called the earth.

  5. Fuses keep it safe

    If a wire is damaged and touches the metal body, a huge amount of electricity could flow and make the wire hot. A fuse has a thin strip of metal that melts first and breaks the circuit. A car has a box full of fuses, one for each circuit, and each fuse is matched to its job.

  6. Safety

    In class, circuits are built with small 1.5-volt cells, under a teacher's or adult's supervision. Car batteries and mains sockets are far more powerful and are never used for experiments.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Power: fuel and electricity lessons · Young Mechanics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.