A short history of the diesel engine – Vehicles and Technology motor mechanics lesson
Lesson 33 of 50 in the Vehicles and Technology course (ages 14+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Follow Rudolf Diesel's idea from an 1892 patent to a huge single-cylinder test engine in 1897, and on to ships, lorries and cars – and the clean-up systems modern diesels carry.
- Time
- 35 minutes + 10 min homework
- Course
- Vehicles and Technology (ages 14+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
How to use this lesson
Try the cylinder volume example yourself with a calculator; it is good practice for GCSE maths and physics. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Diesel engines save fuel but need extra equipment to clean their exhaust. How should we weigh efficiency against pollution?”
- Later: the homework, then the practice test.
Watch out for
- Thinking diesel engines have spark plugs. They ignite fuel by the heat of compressed air. (Some have glow plugs to help cold starts, which is a different job.)
- Thinking the first diesel engine was small enough for a car. It weighed nearly 6 tonnes. Vehicle diesels came decades later, with the first direct-injection vehicle diesel in 1923.
- Thinking 'efficient' means 'clean'. Diesels waste less fuel, but their exhaust needs filters and SCR to deal with soot and nitrogen oxides.
Hands-on: With an adult, hold your thumb over the outlet of a bicycle pump and push the handle down quickly several times. Feel the end of the pump warm up – that is heat from compression, the idea behind the diesel engine. (Use a bicycle pump only; never use a car tyre or any vehicle part.) Then draw a timeline from 1892 to 1932 with the five diesel dates from this lesson.
What you will learn
- I can explain how a diesel engine ignites its fuel without a spark plug.
- I can describe the first diesel engine of 1896–97 and how efficient it was.
- I can list how diesel spread from factories to ships, lorries and cars.
- I can name the exhaust clean-up systems used on modern diesel vehicles.
Key words
- compression ignition
- Igniting fuel by squeezing air so hard it becomes hot enough to light the fuel sprayed into it.
- efficiency
- The share of the fuel's energy that becomes useful work, usually given as a percentage.
- direct injection
- Spraying fuel straight into the combustion chamber, rather than into a passage before it.
- diesel particulate filter (DPF)
- A filter in the exhaust that traps soot (particulate matter).
- SCR and DEF
- Selective catalytic reduction uses diesel exhaust fluid (a urea solution) to turn nitrogen oxides into nitrogen and water.
The big ideas
Rudolf Diesel wanted an engine that wasted far less of its fuel's heat than the steam and gas engines of his day. His idea, patented in 1892 and 1893, was to squeeze air so hard that it became hot enough to ignite fuel sprayed into it – no spark needed. This is called compression ignition, and the US Department of Energy still describes diesel vehicles in exactly those terms.
Turning the idea into a working engine took years of trial and error with the engineers of Maschinenfabrik Augsburg. The prototype in the Deutsches Museum, finished in 1896–97 and regarded as the first diesel engine, is a giant: one cylinder of 19.6 litres, 4.3 metres tall and nearly 6 tonnes. It gave 20 PS (14.7 kW) at 172 rpm. In acceptance tests in February 1897 it turned 26.2% of its fuel's heat into useful work – remarkable for the time.
Diesel engines went on to power ships, lorries, tractors and, later, cars. Their high efficiency comes with a challenge: soot and nitrogen oxides in the exhaust. Modern diesel vehicles carry clean-up systems such as particulate filters and SCR to deal with them.
Read-through: the teaching steps
The idea: heat from squeezing
Squeeze a gas quickly and it gets hot – you may have felt a bicycle pump warm up. A diesel engine squeezes air far more than a petrol engine does, so the air becomes hot enough to ignite the fuel the moment it is sprayed in. The four strokes are the same as in the drawing on the lesson page, but there is no spark plug.
The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes. Patents and early trials, 1892–1894
Diesel's patents date from 1892 and 1893. The Deutsches Museum records two test machines, from 1892/93 and 1894, before the engine that finally worked well. Each failure taught the team about fuel spraying, pressures and materials.
The first diesel engine, 1896–97
The Augsburg prototype:
- one cylinder, four-stroke, water-cooled
- bore 250 mm, stroke 400 mm – 19.6 litres
- 20 PS (14.7 kW) at 172 rpm
- weight 5,950 kg
- fuel blown in by compressed air (air injection)
Tests in February 1897 found it used 238 g of fuel per PS each hour – 26.2% efficiency, later about 27%.
Into ships and vehicles
The company that grew from the Augsburg works (today Everllence, formerly MAN) records:
- 1912 – the first sea-going ship with diesel propulsion
- 1923 – the world's first vehicle diesel engine with direct injection
- 1932 – the most powerful diesel lorry of its day, 150 hp (110 kW)
Diesel's efficiency made it the natural choice for heavy work: lorries, buses, tractors, trains and ships.
Modern diesels and clean exhaust
Burning fuel in very hot, high-pressure air makes nitrogen oxides (NOx) and soot. The US Department of Energy lists the clean-up parts on a modern diesel vehicle:
- diesel oxidation catalyst
- diesel particulate filter – traps soot
- selective catalytic reduction (SCR) – uses diesel exhaust fluid (DEF), a urea solution kept in its own tank, to turn NOx into nitrogen and water
Safety in the workshop
Diesel fuel systems work at very high pressures, and exhaust parts run hot. In a workshop, work on fuel systems is done only by trained technicians following the manufacturer's procedures. Learners study diesels from diagrams and models – look, never touch.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More History of the motor car lessons · Vehicles and Technology course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- Deutsches Museum – Diesel engine
- Everllence
- US Department of Energy, Alternative Fuels Data Center – How do diesel vehicles work?
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.