Oil and filter service (theory) – Motor Vehicle Theory motor mechanics lesson
Lesson 125 of 131 in the Motor Vehicle Theory course (ages 16+)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Understand why engine oil and its filter are changed, what the numbers and symbols on an oil container mean, and why used oil is handled as a hazardous waste.
- Time
- 40 minutes + 10 min homework
- Course
- Motor Vehicle Theory (ages 16+)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
How to use this lesson
This lesson explains oil and filter servicing for understanding; the viscosity activity uses only kitchen liquids. It does not teach a vehicle oil change. Every answer is marked straight away with a worked explanation.
- Read what you will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Motor oil does not wear out, it just gets dirty. What does that tell us about recycling it?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the 'W' means 'weight'. It stands for winter: the first number describes cold flow.
- Thinking thicker oil always protects better. The engine is designed for a specific grade; thicker than specified can reduce economy and slow cold-start flow.
- Thinking used oil is harmless because it came out of a car. It is hazardous waste and can harm skin and water; it must be collected and recycled.
Hands-on: Viscosity race: with an adult, pour equal spoonfuls of water, cooking oil and honey down a tilted tray and time each. Then chill the cooking oil in a fridge for an hour and repeat. Record how temperature changes flow – the idea behind the W number. Wash hands afterwards.
What you will learn
- I can explain the jobs engine oil does and why it needs changing.
- I can read a viscosity grade such as 5W-30.
- I can explain why the manufacturer's oil specification matters.
- I can describe the health and environmental rules for used oil and filters.
Key words
- viscosity
- How thick an oil is – how easily it flows.
- 5W-30
- A multigrade viscosity rating. The number before W (winter) describes cold flow; the second number describes thickness at running temperature.
- oil filter
- A replaceable filter that traps dirt and metal particles from the oil as it circulates.
- sump
- The reservoir at the bottom of the engine that holds the oil.
The big ideas
This is explanation for understanding, not a repair guide. Engine oil does several jobs at once: it lubricates moving parts so metal does not rub on metal, carries heat away, keeps the engine clean by holding dirt in suspension, and helps seal the piston rings. Over time it collects dirt, combustion by-products and tiny metal particles. The filter traps much of this, but the oil itself gradually loses its ability to protect – which is why both are changed at the intervals the manufacturer sets.
Choosing the right oil matters. A grade such as 5W-30 describes viscosity: the lower the number before the W, the more easily the oil flows when cold. Manufacturers specify the grade and quality standard; one manufacturer's handbook, for example, requires oil certified by the American Petroleum Institute, and explains that a thinner 0W-20 oil reduces the fuel needed to overcome engine friction. The US Department of Energy notes that using the recommended grade can improve fuel economy by 1–2%, and that using a thicker grade than specified can lower it.
Used oil needs care. HSE warns that frequent, prolonged skin contact with used engine oil can cause dermatitis and other skin disorders, so workshops use gloves. In England, the Environment Agency classifies used engine oil and oil filters as hazardous waste, and they must not be mixed with other wastes such as brake fluid or antifreeze.
Read-through: the teaching steps
What oil does
- Lubricates: a thin film keeps moving metal parts apart.
- Cools: carries heat away from hot parts.
- Cleans: holds dirt and soot in suspension until the oil is changed.
- Seals: helps the piston rings seal against the cylinder wall.
Why it is changed
Dirt, soot, fuel and water from combustion build up, and the additives that protect the engine are gradually used up. The filter traps particles but eventually fills. The manufacturer's schedule (distance or time, whichever comes first) sets when both are replaced.
Reading the grade
5W-30:
- 5W – cold (winter) performance: lower flows better when cold.
- 30 – thickness at running temperature.
A 0W-20 oil flows more easily than a 5W-30. The handbook gives the grade and the quality standard (for example API and ILSAC symbols on the container).
Why the right grade matters
US Department of Energy figures: using the recommended grade can improve fuel economy by 1–2%; using 10W-30 in an engine designed for 5W-30 can lower it by 1–2%; 5W-30 in an engine designed for 5W-20 by 1–1.5%. Thicker oil than designed for also flows more slowly at a cold start.
In the workshop
A technician follows the manufacturer's procedure, with the vehicle supported safely – HSE warns never to rely on a jack alone – and wears gloves, because prolonged skin contact with used oil can cause dermatitis. The level is then checked on the dipstick between the marks.
Used oil and filters
Environment Agency waste codes: engine, gear and lubricating oils are hazardous (13 02 codes with an asterisk); oil filters are hazardous (16 01 07*). Do not mix oils with brake fluid or antifreeze. Waste goes to licensed collectors.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Servicing and maintenance lessons · Motor Vehicle Theory course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- GOV.UK – Check your vehicle is safe to drive
- HSE – Introduction to safe motor vehicle repair
- HSE – Working under vehicles
- Mazda owner's manual – Recommended oil
- US Department of Energy and EPA, fueleconomy.gov – Keeping your vehicle in shape
- GOV.UK / Environment Agency – Vehicle and oily wastes: how to classify
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.