▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

The starter motor – Garage Basics motor mechanics lesson

Lesson 39 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how a small, powerful electric motor turns an engine over to start it, how the solenoid switches a huge current, and how gearing multiplies its torque.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

The activity uses only toy or school motors and AA batteries. Starter motor circuits on a car carry very large currents and are for technicians only. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think engines are harder to start on very cold mornings?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking the starter motor keeps running while driving. It runs only for a few seconds while starting. Then it disengages.
  • Thinking the ignition switch carries the starter's full current. The switch only works the solenoid, which switches the large current.
  • Thinking the alternator starts the engine. The starter motor starts the engine; the alternator recharges the battery afterwards.

Hands-on: If your school has a simple motor kit, build a motor with a coil of wire, a magnet and a 1.5 V battery, with your teacher. Otherwise, use a toy with a small electric motor and look at how a gear on the motor drives a bigger gear. Count the teeth on both and work out the ratio. Never connect anything to a car battery.

What your child will learn

  • I can explain why an engine needs a starter motor.
  • I can explain the motor effect: a current in a magnetic field feels a force.
  • I can describe the jobs of the solenoid and the pinion.
  • I can calculate the gear ratio between the pinion and the flywheel ring gear, and the speeds and torques involved.

Key words

starter motor
A powerful electric motor that turns the engine over until it starts running by itself.
motor effect
A wire carrying a current in a magnetic field feels a force. This makes electric motors turn.
solenoid
An electromagnetic switch on the starter. It pushes the pinion into mesh and switches on the large starter current.
pinion
The small gear on the starter motor shaft that meshes with the ring gear.
ring gear
A large toothed ring round the edge of the engine's flywheel.

The big ideas

A petrol or diesel engine cannot start itself. It only runs once it is turning, drawing in air and fuel and making power strokes. Something must turn it first. In early cars that was a hand crank; today it is the starter motor, a small but very powerful electric motor.

When the driver turns the key or presses the start button, a small current flows to the starter's solenoid. The solenoid is an electromagnet. It does two things at once: it pushes the small pinion gear forward to mesh with the large ring gear on the engine's flywheel, and it closes heavy contacts that let a current of well over 100 A flow from the battery to the motor. The motor spins, the pinion turns the flywheel, and the engine turns over until it fires.

The pinion has far fewer teeth than the ring gear, so the gearing multiplies the motor's torque many times. As soon as the engine starts, a one-way clutch lets the pinion overrun, and the solenoid pulls it back out of mesh. Electric cars have no engine to start, so they have no starter motor.

Read-through: the teaching steps

  1. Why a starter is needed

    An engine needs to be turning at a reasonable speed (often around 150–250 rpm) before it can draw in its charge, compress it and fire. The starter motor provides that first turning.

    1 Intake2 Compression3 Power4 Exhaustinout
    The four-stroke cycle: intake, compression, power, exhaust. The crankshaft turns twice for the four strokes.
  2. The motor effect

    A wire carrying a current in a magnetic field feels a force. In a motor, coils of wire carry current between magnets. The forces on opposite sides of each coil push in opposite directions, making a turning effect. Bigger current, stronger magnet or more turns of wire give more force.

  3. The solenoid

    The ignition switch could not handle 150 A. Instead it sends a small current to the solenoid. The solenoid's plunger moves, pushing the pinion into mesh and closing big contacts that switch the starter's large current. A small current controls a large one.

  4. Gearing

    The pinion might have 10 teeth and the ring gear 120. The ratio is 120 ÷ 10 = 12:1. The engine turns 12 times more slowly than the motor, but with about 12 times the torque. A starter motor spinning at 2,400 rpm turns the engine at 2,400 ÷ 12 = 200 rpm.

  5. Letting go

    Once the engine fires, it speeds up quickly. If the pinion stayed in mesh, the engine would spin the starter far too fast. A one-way (overrunning) clutch lets the pinion freewheel, and the solenoid pulls it back when the key or button is released.

  6. Huge currents

    Starting takes a very large current for a few seconds, which is why the battery has thick cables and why a weak battery shows itself on a cold morning. Cars with stop-start systems, which switch the engine off at traffic lights, have tougher starters and batteries.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Electricity in the car lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.