▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Series and parallel circuits: lights on a car – Garage Basics motor mechanics lesson

Lesson 36 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out why a car's lights are wired in parallel, and calculate currents and resistances in series and parallel circuits.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

Use only small household batteries. The key idea is that parallel wiring gives each lamp the full voltage and keeps the others working if one fails. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think old-fashioned strings of fairy lights all went out when one bulb failed?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking lamps in parallel share the voltage. In parallel, every branch gets the full supply voltage. It is the current that adds up.
  • Thinking the current is used up in a series circuit. In series the same current flows through every part.
  • Adding resistances in parallel as if they were in series. In parallel, work out each branch current and add the currents.

Hands-on: With an adult, use a 4.5 V battery pack, two identical torch bulbs in holders and crocodile-clip wires. Wire the bulbs in series and note their brightness; unscrew one and see what happens. Then wire them in parallel and repeat. Draw both circuits with circuit symbols. Never use a car battery or mains electricity.

What your child will learn

  • I can describe series and parallel circuits.
  • I can explain why car lights are wired in parallel.
  • I can calculate total resistance and current in a series circuit.
  • I can calculate branch currents and total current in a parallel circuit.

Key words

series circuit
A circuit with only one path: the parts are connected one after another, and the same current flows through each.
parallel circuit
A circuit with several branches: each part has its own path and gets the full supply voltage.
branch
One of the separate paths in a parallel circuit.
total resistance
The single resistance that would take the same current from the supply as the whole circuit.
lamp
Any light unit on a car, such as a headlight or brake light, whether it uses a bulb or LEDs.

The big ideas

There are two basic ways to connect parts in a circuit. In series, they are joined one after another in a single loop, so the same current passes through every part and the supply voltage is shared between them. If one part fails and breaks the loop, everything stops. In parallel, each part has its own branch from the supply, so each gets the full voltage and works on its own.

Car lights are wired in parallel. Each headlight, brake light and side light gets the full 12 V, so it shines at full brightness, and if one bulb fails the others stay on. Imagine if a failed rear bulb also put out the headlights at night.

The rules are simple. In series, resistances add up and the current is the same everywhere. In parallel, the voltage across each branch is the same and the branch currents add up to the total current taken from the battery.

Read-through: the teaching steps

  1. Series: one path

    Two lamps in series share one loop. The supply voltage is split between them, so each gets less than 12 V and glows dimly. Remove one and the other goes out.

    total resistance = R1 + R2 + … current = supply voltage ÷ total resistance

    +12 VBatteryFuseSwitchLampReturn through the body (earth)
    A simple lighting circuit. On a car the metal body is the return path (earth).
  2. Parallel: separate paths

    Two lamps in parallel each connect across the full supply. Each gets 12 V and glows at full brightness. Remove one and the other stays on.

    current in each branch = supply voltage ÷ that branch's resistance total current = sum of branch currents

  3. Why car lights are parallel

    • Each lamp gets the full voltage, so it shines properly.
    • One failed bulb does not put the others out.
    • Each circuit can be switched separately: brake lights, indicators and headlights all work on their own.
  4. Adding up the current

    The battery or alternator must supply the total of all the branch currents. With headlights, rear lights, number plate lamps, the heater fan and the heated rear window all on, the total can be well over 30 A. That is why the alternator must be powerful enough.

  5. Where series is used

    Series connections are still used inside some parts, for example a string of LEDs in a rear lamp unit, or a resistor in series with a fan motor to give a slower fan speed.

  6. Lamp checks

    Because each lamp works on its own, a failed lamp is easy to spot. The Highway Code says to check that lights, indicators, reflectors and number plates are clean before a journey, and GOV.UK lists checking that all lights work every time you drive.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Electricity in the car lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.