▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Hazards in a workshop – Garage Basics motor mechanics lesson

Lesson 57 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out what can hurt people in a vehicle workshop – from falling vehicles and fires to chemicals and high-voltage batteries – and how to tell a hazard from a risk.

Time
40 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

This lesson is about recognising hazards, not doing workshop tasks. If you visit a workshop together, follow its safety rules and keep to the walkways. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “HSE says most deaths happen under badly supported vehicles, but most accidents are slips and trips. Why might the most common accident not be the most deadly one?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking hazard and risk mean the same thing. A hazard is what could cause harm. Risk is how likely the harm is and how bad it would be.
  • Thinking PPE is the best way to stay safe. PPE is the last line of defence. Removing or controlling the hazard comes first.
  • Thinking an electric car is safe because it is silent. A silent vehicle can still be switched on and move, and its high-voltage system can kill. Only trained technicians work on it.

Hands-on: Do a hazard hunt in a garage or shed at home with an adult (no vehicle work). List every hazard you can see – spills, trailing leads, chemicals, sharp tools – and score each one with likelihood × severity. Suggest a control for the highest score. If you visit a real workshop, stay with the qualified adult in the safe walkway and touch nothing.

What your child will learn

  • I can explain the difference between a hazard and a risk.
  • I can name the main hazards in a vehicle workshop that HSE describes.
  • I can score a risk using likelihood × severity.
  • I can put control measures in order, from removing the hazard to wearing PPE.

Key words

hazard
Anything that could cause harm, such as a spill of oil, a raised vehicle or petrol vapour.
risk
How likely it is that the hazard will cause harm, together with how bad the harm would be.
risk assessment
A careful look at what could cause harm, who could be hurt and what is done to prevent it.
control measure
Something done to reduce a risk, such as a guard, a safe system of work or protective equipment.

The big ideas

A vehicle workshop is full of things that can hurt people: heavy vehicles raised in the air, fuel that can catch fire, chemicals that harm skin and lungs, moving parts, noise and, on electric and hybrid cars, high voltage. HSE, the body that looks after workplace safety in Great Britain, says most deaths in motor vehicle repair happen when someone is trapped under a vehicle that is not properly supported, and most accidents involve slips, trips, falls and lifting and carrying.

Safety starts with spotting hazards and thinking about risk. A hazard is anything that could cause harm. Risk is how likely the harm is and how bad it would be. Workshops reduce risk with safe ways of working, the right equipment, training and protective clothing.

This lesson is about recognising hazards. Workshops are not places for young people to work on vehicles: any visit is with a qualified adult, looking only.

Read-through: the teaching steps

  1. Hazard or risk?

    A puddle of oil on the floor is a hazard. The risk is how likely someone is to slip on it and how badly they could be hurt. Cleaning it up removes the hazard; a warning sign and anti-slip floor reduce the risk.

    A simple way to score risk is:

    risk score = likelihood (1 to 5) × severity (1 to 5)

    A score of 15 or more is high and needs action straight away.

  2. Vehicles that fall or move

    HSE says most deaths in vehicle repair happen when people are trapped under vehicles that are not properly supported. Never rely on a jack alone: vehicles are supported on stands or a lift by trained staff.

    Vehicles can also move: one left in gear, rolling on a slope, or an electric vehicle that is silent but switched on.

  3. Slips, trips and lifting

    HSE says most accidents involve slips, trips, falls and manual handling. Oil and coolant spills, trailing air lines and cables, tools left on the floor and open pits all cause falls. Heavy parts – wheels, batteries, gearboxes – can injure backs if lifted badly.

  4. Fire, chemicals and dust

    • Fire and explosion – especially work on fuel tanks or lines. HSE warns never to drain petrol over or near a pit.
    • Paint – two-pack (isocyanate) paints can cause occupational asthma; spraying needs air-fed breathing protection.
    • Oil – frequent, prolonged skin contact with used engine oil can cause dermatitis.
    • Dust – brake and clutch linings on older cars may contain asbestos.
  5. Batteries, tyres and high voltage

    • Batteries give off gases, contain acid and can short-circuit.
    • Tyres can explode, and multi-piece wheels are a particular danger.
    • Electric and hybrid vehicles use up to 650 V DC. HSE says contact with live parts above 110 V DC can be fatal, even with dry skin. High-voltage cables are usually orange. Work on them is only for specially trained technicians – everyone else looks and never touches.
  6. Controlling the risk

    Controls are chosen in this order, best first:

    1. Remove the hazard (clean up the spill). 2. Replace it with something safer (a less harmful product). 3. Engineering controls (guards, extraction, lifts with locks). 4. Safe systems of work, training and signs. 5. Personal protective equipment (PPE) – gloves, goggles, boots – as the last line of defence.

The lesson, step by step

40 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task12 minNot assessed, self-checked
Worked examples and guided practice8 minMarked by Classfern
Independent practice (three levels)11 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Workshop safety and tools lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.