▶ TrainingGet Pro
All tools & lessonsAll toolsAllGet the appApp
Learning departments Music, Maths, Cookery, Programming and Art are open – explore →

Friction: the science of brakes – Garage Basics motor mechanics lesson

Lesson 25 of 70 in the Garage Basics course (ages 11–16)

UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version

Find out how brakes use friction to turn a moving car's energy into heat, and calculate the energy and force involved.

Time
45 minutes + 10 min homework
Course
Garage Basics (ages 11–16)
You need
Paper, a pencil and this page. No tools and no vehicle
Marked
Instantly, with explanations

Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.

For parents: how to use this lesson

A calculator is needed. This is a science lesson only: your child should never touch real brake parts, which can be very hot and are safety-critical. Every answer is marked straight away with a worked explanation.

  1. Read what your child will learn and the big ideas.
  2. Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
  3. Finish with the exit ticket and the talk question: “Why do you think lorries and coaches have to be especially careful on long steep downhill roads?”
  4. Later: the homework, then the practice test.

Watch out for

  • Thinking twice the speed needs twice the braking distance. Kinetic energy depends on speed squared. Twice the speed means four times the energy and, for the same force, four times the braking distance.
  • Thinking brakes destroy energy. Energy is never destroyed. Brakes transfer kinetic energy into heat (and a little sound).
  • Thinking stronger brakes always stop a car sooner. The tyres must grip the road. If braking is stronger than the grip, the wheels lock and skid.

Hands-on: Rub your palms together quickly for ten seconds and feel the heat: that is kinetic energy becoming heat through friction. Then slide a book across a table, a carpet and a tray covered with a tea towel, pushing it the same way each time, and measure how far it slides on each surface.

What your child will learn

  • I can explain that brakes work by friction.
  • I can calculate kinetic energy using ½ × mass × speed².
  • I can explain where the energy goes when a car brakes.
  • I can use work done = force × distance to find a braking distance.
  • I can explain why brakes can fade when they get very hot.

Key words

friction
A force that resists two surfaces sliding over each other.
kinetic energy
The energy of a moving object: ½ × mass × speed², in joules (J).
coefficient of friction
A number showing how grippy two surfaces are. Friction force = coefficient × force pressing them together.
brake fade
Loss of braking power when the brakes get very hot.
work done
Energy transferred by a force: force × distance moved in the direction of the force.

The big ideas

A moving car has kinetic energy. To stop it, that energy must go somewhere. In ordinary brakes it goes into heat: pads or shoes are pressed against a spinning disc or drum, friction between them slows the wheel, and the parts get hot. A car stopping hard from motorway speed can heat its brake discs by hundreds of degrees.

The physics links neatly. Kinetic energy = ½ × mass × speed², so doubling the speed gives four times the energy to get rid of. The work done by the braking force over the stopping distance must equal that energy: braking force × braking distance = kinetic energy. Twice the speed means four times the braking distance for the same braking force.

Brakes are safety-critical. Checking and repairing them is work for qualified technicians only, and in the UK the brakes are inspected at the MOT. Brake and clutch linings on older cars may contain asbestos, which is why workshops follow strict rules (HSE). This lesson is about the science only.

Read-through: the teaching steps

  1. Friction

    Friction acts between surfaces that slide, or try to slide, over each other. It always acts against the motion. Rough or grippy surfaces give more friction, and pressing the surfaces together harder gives more friction:

    friction force = coefficient of friction × force pressing together

    CaliperBrake discFluidPistonPadsDisc (edge on)
    A disc brake: fluid pressure pushes the piston, the pads squeeze the spinning disc, and friction turns movement into heat.
  2. Kinetic energy

    Kinetic energy (J) = ½ × mass (kg) × speed² (m/s)².

    A 1,000 kg car at 10 m/s has ½ × 1,000 × 10² = 50,000 J. At 20 m/s it has ½ × 1,000 × 20² = 200,000 J: twice the speed, four times the energy.

  3. Where the energy goes

    When the brakes are applied, friction between the pad and disc (or shoe and drum) does work. The kinetic energy of the car turns into heat in the brakes, which then spreads into the air. A little also becomes sound. Electric and hybrid cars can send some of it back to the battery instead (regenerative braking).

  4. Braking distance

    Work done = force × distance. While stopping, the braking work equals the kinetic energy:

    braking force × braking distance = kinetic energy

    so braking distance = kinetic energy ÷ braking force. A 200,000 J car with a braking force of 8,000 N stops in 200,000 ÷ 8,000 = 25 m.

  5. Brake fade

    If brakes get extremely hot, for example on a long steep downhill, the friction material and the fluid can stop working as well. The driver must push harder for the same slowing: this is brake fade. Using a lower gear on long hills lets the engine help slow the car, so the brakes stay cooler.

  6. Grip at the tyre

    The brakes slow the wheel, but it is friction between the tyre and the road that slows the car. If the brakes are stronger than the tyre's grip, the wheel locks and skids. That is why worn tyres, wet roads and ice make stopping distances much longer.

The lesson, step by step

45 minutes in 5 parts
PartTimeHow it is checked
Starter: warm up4 minMarked by Classfern
Teaching and hands-on task14 minNot assessed, self-checked
Worked examples and guided practice9 minMarked by Classfern
Independent practice (three levels)13 minMarked by Classfern
Exit ticket and talk question5 minMarked by Classfern, self-checked

Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.

The lesson

It runs here on the page. No sign-up and no names – progress is kept only in this browser.

Homework

About 10 minutes: 6 questions and a one-line reflection, all marked instantly.

More practice

More Brakes, steering and suspension lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department

Sources and curriculum

Facts in this lesson were checked against:

Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.