Energy in a car: where the fuel's energy goes – Garage Basics motor mechanics lesson
Lesson 12 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Follow the energy in a tank of fuel and find out how little of it actually moves the car – then compare a petrol car with an electric car using real US government figures.
- Time
- 50 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only.
For parents: how to use this lesson
The figures come from US Department of Energy publications and vary with driving conditions, so they are given as ranges. Squared paper makes the Sankey diagram easy. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “If most of a petrol engine's energy becomes heat, how could that heat be made useful?”
- Later: the homework, then the practice test.
Watch out for
- Thinking wasted energy is destroyed. Energy is conserved. Wasted energy is dissipated, mostly as heat, into the surroundings.
- Thinking most fuel energy goes into moving the car. In a petrol car only about a fifth reaches the wheels; most becomes heat.
- Thinking an electric car wastes no energy. It still loses energy in charging, in the motor and electronics, and to accessories – just much less than a petrol car.
Hands-on: Draw a Sankey diagram to scale on squared paper for a petrol car, using 100 squares for the fuel energy: 20 squares wide for "to the wheels" and 80 for losses (split into heat through exhaust and radiator, friction, and accessories). Then draw one for an electric car with 67 squares reaching the wheels. Compare the two.
What your child will learn
- I can describe the energy transfers in a petrol car from fuel to movement.
- I can name the main places where energy is wasted.
- I can calculate efficiency as a percentage.
- I can compare the efficiency of a petrol car and an electric car using published figures.
Key words
- chemical energy store
- Energy stored in the fuel, released when it burns.
- efficiency
- The fraction of the energy put in that is transferred usefully, often given as a percentage.
- dissipated
- Spread out into the surroundings, usually as heat, so it is no longer useful.
- Sankey diagram
- A diagram with arrows whose widths show how much energy goes where.
- regenerative braking
- Using an electric motor as a dynamo when slowing down, so some movement energy is stored back in the battery.
The big ideas
Fuel has a large chemical energy store. When it burns in the engine, that energy is transferred – but most of it does not end up moving the car. It is dissipated as heat through the exhaust, the radiator and friction.
US Department of Energy figures show that, on average, only about 20% of the energy released from the fuel in a petrol car is delivered to the wheels. The other 80% is lost, mainly to the inefficiency of the engine itself, to friction in the drivetrain and to running accessories such as the coolant pump and the alternator. The biggest single loss is heat carried away by the exhaust and the radiator.
Electric cars waste far less. The US government fuel economy site reports that in combined driving about 65–69% of the energy taken from the charger reaches the wheels, and more when energy recovered by regenerative braking is counted. Energy is still wasted – in charging, in the motor and electronics, and in running accessories – but much less.
Read-through: the teaching steps
Energy transfers
In a petrol car:
- chemical energy in the fuel →
- thermal energy in the hot gases in the cylinder →
- kinetic energy of the pistons and crankshaft →
- kinetic energy of the moving car
At every stage, some energy is dissipated as heat. Follow the turning force from the engine to the wheels in the drawing on the lesson page.
How the turning force gets from the engine to the driven wheels (rear-wheel drive shown). Where it goes
A US Department of Energy summary of engine energy use (combined driving) shows roughly:
- Heat lost through the radiator, exhaust and so on: about 60–62%
- Pumping air in and out: about 4%
- Friction inside the engine: about 3%
- Incomplete combustion: about 3%
- Useful work from the engine: about 17–21%
The figures vary with how the car is driven.
Calculating efficiency
Efficiency = useful energy out ÷ total energy in × 100%.
If 100 MJ of fuel energy is burned and 20 MJ reaches the wheels, efficiency = 20 ÷ 100 × 100% = 20%. Energy is never destroyed: the other 80 MJ is still there, but it has been dissipated as heat.
Sankey diagrams
A Sankey diagram shows energy flows as arrows. The arrow starts as wide as the total energy put in. It splits: a thin arrow carries on to "useful kinetic energy", and wide arrows bend away for heat losses. The widths must add up to the starting width, because energy is conserved.
The electric car comparison
The US government fuel economy site gives these figures for an electric car in combined driving:
- Charging losses: about 10%
- Accessories: about 3%
- Drive losses (motor and electronics): about 18%
- Energy to the wheels: 65–69%, or 87–91% when regenerative braking is counted
The same site says electric drive losses are 15–20%, against 64–75% engine losses in a petrol car.
Reducing waste
Engineers improve efficiency by reducing friction (better oils and bearings), recovering waste energy (turbochargers, regenerative braking), stopping the engine at traffic lights, and making cars lighter and more streamlined. Drivers help too: smooth driving and correct tyre pressures waste less energy.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 15 min | Not assessed, self-checked |
| Worked examples and guided practice | 10 min | Marked by Classfern |
| Independent practice (three levels) | 16 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Engines and fuel lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- US Department of Energy and EPA, fueleconomy.gov – Where the energy goes: electric cars
- US Department of Energy, Alternative Fuels Data Center – How do gasoline cars work?
- US Department of Energy, Alternative Fuels Data Center – Energy losses in light-duty gasoline vehicles
- US Department of Energy, Vehicle Technologies Office – Fact #709: engine energy use, where does the energy go?
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.