Dashboard warning lights and what to do – Garage Basics motor mechanics lesson
Lesson 52 of 70 in the Garage Basics course (ages 11–16)
UK version. UK spelling and words (tyre, petrol, bonnet) and UK rules such as the MOT. · US version
Learn what the most important dashboard warning lights mean, why they light up for a moment when the car starts, and how the colour of a light tells the driver how urgent the problem is.
- Time
- 35 minutes + 10 min homework
- Course
- Garage Basics (ages 11–16)
- You need
- Paper, a pencil and this page. No tools and no vehicle
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches motor mechanics as a school subject. It is not a training course or a qualification, and nothing here replaces an IMI or City & Guilds course, an apprenticeship or a qualified technician. Never work on a real vehicle without a qualified adult, the right protective equipment and safe equipment. High-voltage parts of electric and hybrid vehicles are for trained technicians only. Rules and values on this page are given as of November 2026. Always check the current official source (GOV.UK and the DVSA MOT inspection manual) before relying on them.
For parents: how to use this lesson
If you show your child the bulb check, switch the ignition on with the engine off and the car parked, then switch off. The handbook explains each symbol for your car. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Some new cars show a written message on a screen as well as a symbol. Is a symbol or a message better for a driver, and why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking the warning lights at start-up mean something is wrong. That is the bulb check, which shows the lights work. They should go out once the engine starts.
- Thinking an amber light can be ignored if the car still drives normally. Amber means a fault that needs checking soon. Leaving it can lead to bigger damage or a safety problem.
- Thinking a red light only needs attention at the next service. A red light usually means stop safely as soon as possible. Driving on can wreck the engine or be unsafe.
Hands-on: Find the warning light page in a family car's handbook (or the maker's website). Draw six of the symbols on cards, colour them red or amber, and write on the back what each means and what a driver should do. With a qualified adult and the car parked, sit in the driver's seat while the adult switches the ignition on (engine off) and watch the bulb check – then the adult switches off again.
What your child will learn
- I can explain why warning lights come on briefly when the ignition is switched on.
- I can explain what red and amber warning lights usually mean.
- I can say what the oil pressure, charging, brake, engine and tyre pressure lights warn about.
- I can say what a driver should do when a red or amber light comes on.
Key words
- warning light
- A symbol on the dashboard that lights to tell the driver about a problem with the vehicle.
- bulb check
- The short time after the ignition is switched on when warning lights come on to show they work, then go out.
- charging system
- The alternator and wiring that recharge the battery while the engine runs.
- engine management light
- An amber light, often shaped like an engine, that shows the control unit has found a fault in the engine or emissions systems. In the US it is often called the check engine light.
The big ideas
A car's dashboard can show dozens of symbols. Most are information – headlights on, indicator flashing – but some are warnings that something is wrong. Knowing the important ones can prevent a breakdown, a damaged engine or a crash.
The Highway Code says warning lights should go out when the engine starts, apart from the handbrake light. If the charge warning light stays on while driving, the battery may not be charging. The car's handbook shows every symbol and what to do.
Most cars use a simple colour code. A red light usually means stop safely as soon as possible; an amber light usually means have the car checked soon; green or blue lights are just information. In every case, the fix is a job for a qualified mechanic.
Read-through: the teaching steps
The bulb check
When the ignition is switched on, many warning lights come on together. This shows that each light works. The Highway Code says they should go out once the engine starts – the handbrake light is the exception, and stays on while the handbrake is applied.
A warning light that does not come on at all during the check could be faulty, and then it cannot warn the driver.
Colours: how urgent is it?
Most makers use a colour code:
- Red – a serious problem or a safety risk. Stop safely as soon as possible and switch off.
- Amber (yellow or orange) – a fault that needs checking soon. Drive carefully and get help.
- Green or blue – information, such as headlights or main beam on.
The handbook gives the exact meaning for each car.
Red lights: stop safely
- Oil pressure (an oil can) – the engine may not be getting oil. Running on could wreck it.
- Charging (a battery) – the Highway Code says that if it stays on while driving, the battery may not be charging. The car will run until the battery is flat.
- Brake system (a circle with an exclamation mark) – low brake fluid or a brake fault, unless the handbrake is on.
- Coolant temperature (a thermometer in liquid) – the engine is overheating.
- Airbag – the airbag system has a fault and might not work in a crash.
Amber lights: get it checked
- Engine management (an engine outline) – a fault in the engine or emissions system. If it flashes, the fault is more serious; the handbook says what to do.
- ABS – the anti-lock system has a fault. Normal brakes still work, but the wheels may lock in an emergency stop.
- Tyre pressure (a tyre cross-section with an exclamation mark) – a tyre has lost pressure.
- Glow plug (a coil, on diesels) – lights while the engine warms up before starting.
What to do
When a red light comes on while driving:
- find a safe place to stop as soon as possible;
- switch off the engine;
- check the handbook and call for help.
For an amber light, drive carefully and have the car checked soon by a qualified mechanic. A driver should never ignore a warning light or cover it up.
Warning lights in the MOT
Warning lamps matter in the MOT too. For example, the MOT inspection manual says an anti-lock braking system warning device that is not working, or that shows a malfunction, is a major defect.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Looking after a car lessons · Garage Basics course · All motor mechanics practice tests · Motor Mechanics Department
Sources and curriculum
Facts in this lesson were checked against:
- The Highway Code – Annex 6. Vehicle maintenance, safety and security
- DVSA MOT inspection manual: cars and passenger vehicles – 1. Brakes
Our lessons and questions are our own. They are not written or endorsed by the DVSA, the IMI, City & Guilds, any college, testing agency or exam board.