Paper aeroplane science: make, test, improve – Young Aviators aviation lesson
Lesson 6 of 60 in the Young Aviators course (ages 8–11)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
Be a test pilot and an engineer at the same time. Fold a paper aeroplane, find the four forces on it, then run fair tests to make it fly further.
- Time
- 50 minutes + 10 min homework
- Course
- Young Aviators (ages 8–11)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.
For parents: how to use this lesson
Clear a safe space indoors (no throwing at faces). The science here is the fair test and the average – praise careful measuring as much as long flights. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Real aeroplane makers test with wind tunnels and computers before anyone flies. Why do you think they test so much?”
- Later: the homework, then the practice test.
Watch out for
- Changing two things at once, such as the wing size and the paper clip. Change one thing only. Then you know what made the difference.
- Trusting a single throw. Throw three times and take the average – one throw can be lucky.
- Thinking a harder throw is the only way to fly further. Shape and balance matter too. A well-balanced glider can beat a hard throw.
Hands-on: Run the full experiment: fold two copies of the same design, change one thing on the second copy, throw each three times from the same line, measure, record in a table and work out the averages. Which change won?
What your child will learn
- I can find the four forces on a paper aeroplane.
- I can plan a fair test, changing only one thing at a time.
- I can measure and record how far a paper aeroplane flies.
- I can work out an average from three throws.
Key words
- fair test
- A test where you change only one thing and keep everything else the same.
- variable
- Something that can change in a test, such as the wing shape or the throw.
- average
- Add the results together and divide by how many there are. It smooths out lucky and unlucky throws.
- elevator
- The moving part at the back that points the nose up or down. On paper, bend the back edges of the wings.
The big ideas
A paper aeroplane feels the same four forces as a real one. Your throw gives it thrust. Drag – the air pushing back – slows it down. Weight pulls it towards the ground. Its wings make lift as they move through the air, turning the air downwards.
Engineers improve aeroplanes by testing. The secret of a good test is to change only one thing at a time – the wing size, a paper clip on the nose, or a small bend at the back of the wings – and keep everything else the same. That is a fair test.
One throw can be lucky or unlucky, so scientists repeat each test and take an average. With a tape measure, a notebook and some paper, you can run real aircraft experiments at home.
Read-through: the teaching steps
Fold a dart
Fold a sheet of A4 paper in half lengthways, fold the two top corners into the middle, fold the new slanted edges in again, then fold the wings down on each side. Look at the drawing on the lesson page and name the parts of your aeroplane: body, wings and tail end.
The five main parts of a light aeroplane. Find the four forces
- Thrust – your throw pushes it forwards
- Drag – the air pushes back
- Weight – gravity pulls it down
- Lift – the wings push air down, so the air pushes the wings up
A paper aeroplane has no propeller, so after your throw it glides, slowly sinking.
The four forces. In steady, level flight lift balances weight and thrust balances drag. Plan a fair test
Choose ONE thing to change. Keep the same paper, the same thrower, the same throw and the same place. Ideas:
- Add a paper clip to the nose
- Bend up the back edges of the wings a little (your own elevator)
- Make the wings bigger or smaller
Measure and record
Throw from a line on the floor. Measure where the aeroplane first touches the ground with a tape measure. Throw each design three times and write every result in a table.
Work out the average
Add the three distances and divide by 3. Compare the averages for your two designs. The one with the bigger average flew further.
Improve and test again
Keep the better change and try a new one. Real engineers repeat this make–test–improve loop many times before a new aeroplane is finished.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 15 min | Not assessed, self-checked |
| Worked examples and guided practice | 10 min | Marked by Classfern |
| Independent practice (three levels) | 16 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More How things fly lessons · Young Aviators course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.