At the airport: runways, taxiways, terminal and tower – Young Aviators aviation lesson
Lesson 15 of 60 in the Young Aviators course (ages 8–11)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
An airport is like a small town built for aeroplanes. Find out what the runway, taxiways, apron, terminal and control tower are for.
- Time
- 35 minutes + 10 min homework
- Course
- Young Aviators (ages 8–11)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.
For parents: how to use this lesson
If you visit an airport, look out of the terminal windows together and spot the runway, taxiways, apron and tower. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Where would you put the control tower at your airport, and why?”
- Later: the homework, then the practice test.
Watch out for
- Thinking aeroplanes drive on the runway to get everywhere. They use taxiways to get around and only use the runway to take off and land.
- Thinking the control tower flies the aeroplanes. Controllers give instructions and information; the pilots fly the aeroplanes.
- Thinking all airport lines are white. Runway markings are white; taxiway markings are yellow.
Hands-on: Design your own airport on a large sheet of paper. Draw one runway with a number at each end, taxiways in yellow, an apron, a terminal and a control tower placed where it can see everything. Add holding position lines where each taxiway meets the runway.
What your child will learn
- I can name the main parts of an airport.
- I can explain the difference between a runway and a taxiway.
- I can say what the control tower does.
- I can say what colours are used for runway and taxiway markings.
Key words
- runway
- The long strip where aeroplanes take off and land.
- taxiway
- A road for aeroplanes, joining the runway to the parking areas.
- apron
- The area where aeroplanes park, load and refuel.
- terminal
- The building where passengers check in, wait and board.
- control tower
- A tall building with big windows where controllers watch and guide the aircraft.
- holding position
- Yellow lines on a taxiway where aircraft must stop before a runway.
The big ideas
When you fly from an airport, you mostly see the terminal – the building with check-in desks, security and shops. But the airport is much bigger than that.
Out on the airfield there are runways for taking off and landing, and taxiways – roads for aeroplanes – that link the runways to the apron, where aircraft park to load passengers, bags and fuel.
Above it all stands the control tower. From its high windows, controllers can see the runways and taxiways and tell each pilot when it is safe to move, take off or land. Painted lines, signs and coloured lights help everyone know exactly where they are, by day and by night.
Read-through: the teaching steps
A map of the airport
Look at the drawing on the lesson page. Find the runway, the taxiways that join it, the apron where aircraft park, the terminal and the tower.
Runway numbers are the runway's magnetic direction divided by 10. The circuit is flown around the runway. Runways
Runways are long, wide and very strong, because heavy aeroplanes land on them. Their markings are painted white, with a big number at each end that shows the direction the runway points.
Taxiways
Aeroplanes move slowly along taxiways to get to and from the runway. Taxiway lines are painted yellow, and at night taxiway edges have blue lights and the centre line may have green lights.
Stop before the runway
Before a taxiway reaches a runway, there are four yellow lines across it – two solid and two dashed. These are holding position markings. An aircraft on the solid-line side must stop there until it is allowed onto the runway.
Apron and terminal
On the apron, ground crews load bags, fuel the aeroplanes and clean the cabins. Passengers walk from the terminal to the aeroplane through a bridge, or by bus or on foot.
The control tower
Controllers in the tower talk to pilots by radio. If a radio stops working, the tower can use a special light gun:
- Steady green to an aircraft in the air: cleared to land
- Steady red to an aircraft on the ground: stop
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 11 min | Not assessed, self-checked |
| Worked examples and guided practice | 7 min | Marked by Classfern |
| Independent practice (three levels) | 8 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Airports, pilots and safety lessons · Young Aviators course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.