Airport lights and signs for beginners – Young Aviators aviation lesson
Lesson 17 of 60 in the Young Aviators course (ages 8–11)
UK version. UK spelling and units (hPa, metres, litres) and the UK CAA. · US version
Airports use colours like a secret code: white and yellow paint, red and yellow signs, and white, green, red and blue lights. Learn what each colour means.
- Time
- 40 minutes + 10 min homework
- Course
- Young Aviators (ages 8–11)
- You need
- Paper, a pencil and this page
- Marked
- Instantly, with explanations
Education and interest only. Classfern teaches aviation as a school subject. It is not flight training, not an approved training organisation, and nothing here counts towards a pilot licence or replaces a CAA-approved course and the CAA’s own exams.
For parents: how to use this lesson
If you visit an airport viewing area, play 'spot the colour': yellow taxiway lines, white runway markings and red signs. Great for building observation skills. Every answer is marked straight away with a worked explanation.
- Read what your child will learn and the big ideas.
- Press Start the lesson below for the teaching, worked examples and practice (Getting started, On track or Challenge).
- Finish with the exit ticket and the talk question: “Why is it useful for every airport to use the same colours?”
- Later: the homework, then the practice test.
Watch out for
- Thinking all airport lines are white. Runway markings are white, taxiway markings are yellow.
- Mixing up the blue and white lights. White lights line the runway; blue lights line the taxiways.
- Thinking a red sign is just decoration. Red signs with white writing mark places like runway entrances that need permission.
Hands-on: Draw a runway and a taxiway on a big sheet of paper. Use white (or leave blank) for runway lines and yellow for taxiway lines. Add blue dots along the taxiway edges, white dots along the runway, and a red sign where the taxiway meets the runway.
What your child will learn
- I can say that runway markings are white and taxiway markings are yellow.
- I can describe the three main kinds of airport sign by their colours.
- I can name the colours of runway and taxiway lights.
- I can say what a white-and-green flashing beacon tells a pilot at night.
Key words
- runway
- The long strip where aeroplanes take off and land.
- taxiway
- A path that aeroplanes use to move between the runway and the parking areas.
- mandatory sign
- A red sign with white writing. It marks places an aeroplane must not go into without permission, such as a runway.
- beacon
- A rotating light that flashes to show pilots where an airport is at night.
The big ideas
At a big airport, pilots must find their way along runways and taxiways, by day and by night. To help, airports use the same colour code everywhere. The FAA's Aeronautical Information Manual explains it. Painted markings on runways are white; markings on taxiways are yellow.
Signs have colour codes too. A red sign with white writing is a mandatory instruction sign – it marks the entrance to a runway or other places an aircraft must not enter without permission. A black sign with yellow writing tells pilots where they are. A yellow sign with black writing and arrows shows which way the taxiways go.
At night, lights take over. Runway edges are lit white, and taxiway edges are lit blue. Lights at the end of a runway show green to aeroplanes arriving to land and red towards the runway to show departing aeroplanes where it ends. A rotating beacon flashing white and green shows a lighted land airport.
Read-through: the teaching steps
White paint, yellow paint
- Runway markings are white.
- Taxiway markings are yellow.
So if you see yellow lines, you are on a taxiway; white numbers and stripes mean a runway. Look at the drawing on the lesson page.
Runway numbers are the runway's magnetic direction divided by 10. The circuit is flown around the runway. Red signs: stop and check
A red sign with white writing is a mandatory instruction sign. It marks the entrance to a runway and other places an aircraft may not go without permission from the controllers.
Black and yellow signs
- Black background, yellow writing: a location sign – 'you are here'.
- Yellow background, black writing with arrows: a direction sign – which way each taxiway goes.
Yellow signs with black writing also point to places like the fuel area or give information.
Runway lights
At night, white lights line the edges of the runway. At the very end, the lights show green to aeroplanes coming in to land (marking where the runway starts) and red towards the runway (showing departing aeroplanes where it ends).
Taxiway lights
Taxiway edge lights are blue. Some taxiways also have green lights along the middle line.
The airport beacon
Many airports have a rotating beacon. A beacon flashing white and green means a lighted land airport. White and yellow means a water airport for seaplanes.
The lesson, step by step
| Part | Time | How it is checked |
|---|---|---|
| Starter: warm up | 4 min | Marked by Classfern |
| Teaching and hands-on task | 12 min | Not assessed, self-checked |
| Worked examples and guided practice | 8 min | Marked by Classfern |
| Independent practice (three levels) | 11 min | Marked by Classfern |
| Exit ticket and talk question | 5 min | Marked by Classfern, self-checked |
Make my lesson plan Opens this lesson in the free Lesson Plan Maker, filled in and ready to change, print or save.
The lesson
It runs here on the page. No sign-up and no names – progress is kept only in this browser.
Homework
About 10 minutes: 6 questions and a one-line reflection, all marked instantly.
More practice
More Airports, pilots and safety lessons · Young Aviators course · All aviation practice tests · Aviation Department
Sources and curriculum
Facts in this lesson were checked against:
Our lessons and questions are our own. They are not written or endorsed by the CAA, any flying school, testing agency or exam board.